Can anyone identify these parts???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged91 · 01-13-2005, 08:56 PM

Below are pictures of an underdash steering column mount and an intermediate shaft from the same column. The column is an automatic tilt... Are these van parts? Motorhome?

The steering column mount has the letters "MNP" stamped into it. It has the same bolt pattern as the stock flat plate that goes under the column and it also has the holes in the same spot for the pedal bumpers...

ANY HELP WOULD BE APPRECIATED...

Tx Firefighter · 01-13-2005, 09:06 PM

Looks like van stuff to me. The intermediate shaft is way too short for a truck one.

MOTHERTRUCKERS · 01-13-2005, 09:14 PM

Id put my money on a motor home column and drop mount because the column shaft is short like a trucks.

bagged91 · 01-13-2005, 09:31 PM

OK... That's what I thought. Thanks guys....

Bob Moore · 01-13-2005, 09:43 PM

Without the intermediate shaft(which it looks like you already took off) that col. should be the same length as a true truck tilt col. If it is an early tilt, the PRNDLL should also have early style lettering rather than the later(more common) van lettering style.

teamharvey · 01-13-2005, 10:15 PM

I have to go with motor home as well ( although I have never seen one ) just for the reason the inter. shaft you have pictured is much smaller than a van or truck one, and the bracket is different as well.

Bret

Brainchild · 01-13-2005, 10:41 PM

Looks just like the one I pulled from a 1 ton van.

bagged91 · 01-14-2005, 04:54 PM

Anyone have a pic of what the differences in the PRNDLL script are?

Thanks!
Joe

Bob Moore · 01-14-2005, 05:45 PM

I'll e-mail a picture tonight of both styles. Maybe you could then post it for others.

Thanks - Bob

01-13-2005, 08:56 PM	#1
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Can anyone identify these parts???? Below are pictures of an underdash steering column mount and an intermediate shaft from the same column. The column is an automatic tilt... Are these van parts? Motorhome? The steering column mount has the letters "MNP" stamped into it. It has the same bolt pattern as the stock flat plate that goes under the column and it also has the holes in the same spot for the pedal bumpers... ANY HELP WOULD BE APPRECIATED... Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-13-2005, 09:06 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Looks like van stuff to me. The intermediate shaft is way too short for a truck one. __________________ I'm on the Instagram- @Gearhead_Kevin

01-13-2005, 09:14 PM	#3
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Id put my money on a motor home column and drop mount because the column shaft is short like a trucks. __________________ Rest in Peace Ed. Thanks for all the good times.

01-13-2005, 09:31 PM	#4
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	OK... That's what I thought. Thanks guys.... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-13-2005, 09:43 PM	#5
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Without the intermediate shaft(which it looks like you already took off) that col. should be the same length as a true truck tilt col. If it is an early tilt, the PRNDLL should also have early style lettering rather than the later(more common) van lettering style. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow Last edited by Bob Moore; 01-13-2005 at 09:47 PM.

01-13-2005, 10:15 PM	#6
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 578	I have to go with motor home as well ( although I have never seen one ) just for the reason the inter. shaft you have pictured is much smaller than a van or truck one, and the bracket is different as well. Bret __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

01-13-2005, 10:41 PM	#7
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Looks just like the one I pulled from a 1 ton van. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

01-14-2005, 04:54 PM	#8
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Anyone have a pic of what the differences in the PRNDLL script are? Thanks! Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-14-2005, 05:45 PM	#9
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Prndll I'll e-mail a picture tonight of both styles. Maybe you could then post it for others. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.