1986 Front Clip and Four doors for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

f.monroe · 01-18-2005, 12:05 AM

I have a complete fron clip for sale .$300 local pickup only .The driver fender has had a dent repaired and has some filler .The hood is a newer GM hood and still has the sticker on the under side .The rest of the clip is just original 1986 .
I will be selling 4 doors from the same Suburban.They are electric doors and are nice doors .$200 for all four.

Tilt steering column for 1986. $100

Front bumper is nice , Rear is OK .Dont know if there is a need for bumpers.

The interior is NOT nice so I dont think it has many useable parts other than the dash gauges and possibly the bucket seat brackets .The seats are trash.

If anyone would like the front suspension let me know. I am going to cut the front frame and keep the suspension.

If you are in the area and need something off this Suburban, let me know and it might still be there.
I should be pulling the parts this weekend. You can contact me at 979-272-9403 after 7 pm

f.monroe · 01-20-2005, 12:13 AM

$500 for everything and you can take anything else off the Suburban before the rest goes to scrap.It also has a set of smallblock headers for some reason.

powder2 · 01-20-2005, 01:20 AM

you have pics of the bucket seat brackets and how much. is the dash pad screwed up

f.monroe · 03-05-2005, 01:19 AM

I have the front clip, front doors, front and rear bumper bumpers and all brackets, and a set of headers( smallblock), and the tilt steering column with the steering wheel. I scrapped everything else .I would like to sell it all as one package .$450 for all of it .Remember that the hood is a GM replacement hood in excellent condition that has the GM sticker still on the underside. A new hood is around $300 by itself. It will have to be picked up in Caldwell Tx. Frank

zx9Duran · 03-12-2005, 11:28 PM

Pm me if you still have it ... what color is it ?

f.monroe · 03-13-2005, 02:39 AM

Still have it .PM sent . Frank

low 84 · 03-13-2005, 04:17 AM

how much for the rear bumper and brackets? i'm local

low 84 · 03-15-2005, 03:49 AM

ttt

low 84 · 03-17-2005, 08:34 PM

hello hello hello?

f.monroe · 03-17-2005, 08:56 PM

I was waiting for zxduran but I havent heard from him .I will take $75 for the rear bumper. Let me know .I can be reached at 979-218-7029 tonight or home at 979-272-9403 .Frank

low 84 · 03-18-2005, 03:26 AM

thanks for the reply, thats a little more than i was looking for. going to be modifying it (cutting it) so i don't need a real nice expensive bumper. thanks though

f.monroe · 04-03-2005, 10:31 AM

My prices are listed .I need to get rid of this stuff .MAKE OFFER! if you need any of it .Frank

01-18-2005, 12:05 AM	#1
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	1986 Front Clip and Four doors for sale I have a complete fron clip for sale .$300 local pickup only .The driver fender has had a dent repaired and has some filler .The hood is a newer GM hood and still has the sticker on the under side .The rest of the clip is just original 1986 . I will be selling 4 doors from the same Suburban.They are electric doors and are nice doors .$200 for all four. Tilt steering column for 1986. $100 Front bumper is nice , Rear is OK .Dont know if there is a need for bumpers. The interior is NOT nice so I dont think it has many useable parts other than the dash gauges and possibly the bucket seat brackets .The seats are trash. If anyone would like the front suspension let me know. I am going to cut the front frame and keep the suspension. If you are in the area and need something off this Suburban, let me know and it might still be there. I should be pulling the parts this weekend. You can contact me at 979-272-9403 after 7 pm

01-20-2005, 12:13 AM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	parts $500 for everything and you can take anything else off the Suburban before the rest goes to scrap.It also has a set of smallblock headers for some reason.

03-05-2005, 01:19 AM	#4
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Update I have the front clip, front doors, front and rear bumper bumpers and all brackets, and a set of headers( smallblock), and the tilt steering column with the steering wheel. I scrapped everything else .I would like to sell it all as one package .$450 for all of it .Remember that the hood is a GM replacement hood in excellent condition that has the GM sticker still on the underside. A new hood is around $300 by itself. It will have to be picked up in Caldwell Tx. Frank

03-13-2005, 04:17 AM	#7
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	how much for the rear bumper and brackets? i'm local __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

03-15-2005, 03:49 AM	#8
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	ttt __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-20-2005, 01:20 AM	#3
powder2 Registered User Join Date: Oct 2003 Location: Abilene Texas Posts: 287	you have pics of the bucket seat brackets and how much. is the dash pad screwed up

03-12-2005, 11:28 PM	#5
zx9Duran Registered User Join Date: Feb 2005 Location: Garland TX Posts: 8	Pm me if you still have it ... what color is it ?

03-13-2005, 02:39 AM	#6
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Still have it .PM sent . Frank

03-17-2005, 08:34 PM	#9
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	hello hello hello? __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

03-17-2005, 08:56 PM	#10
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Bumper I was waiting for zxduran but I havent heard from him .I will take $75 for the rear bumper. Let me know .I can be reached at 979-218-7029 tonight or home at 979-272-9403 .Frank

03-18-2005, 03:26 AM	#11
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	thanks for the reply, thats a little more than i was looking for. going to be modifying it (cutting it) so i don't need a real nice expensive bumper. thanks though __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

04-03-2005, 10:31 AM	#12
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Prices My prices are listed .I need to get rid of this stuff .MAKE OFFER! if you need any of it .Frank

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.