Opinions on these wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 01-18-2005, 01:50 AM

Guys I need opinions on these wheels. The pic is of some 18's . I know it's a crappy photoshop job, but it's the best my friend could do.

I have 15's on there right now, so I know it's hard to get an accurate guess on how much they will fill the wheel well.

thanks

Liftedassdodge · 01-18-2005, 02:35 AM

needs more of a drop if you ask me, but nice rims

5150 · 01-18-2005, 02:41 AM

Well, the rear is dropped 4 inches. I really think that they look like they are 15's or 16's in the pic.

5150 · 01-18-2005, 02:46 AM

Here's what's on it now

woodman13 · 01-18-2005, 03:16 AM

Rims look good....but I agree needs the ass end dropped more!

Brainchild · 01-18-2005, 04:02 AM

Something like this looks better.I like the Dragstars myself,but then I always have.

Blue Beard · 01-18-2005, 04:51 AM

Needs alittle more tire...

Longhorn Man · 01-18-2005, 06:10 AM

I liike the Cariagars on there...looks mean/tough.

**special-K** · 01-18-2005, 08:33 AM

Wheels,OK.Need rubber.Looks better in 2nd,lower picture.I`ll take the Drag Stars.

shuttermutt · 01-18-2005, 09:49 AM

Frankly, I really don't like those wheels. I don't think I'd like them on any vehicle, but they really don't look like they belong on a truck to me. Then again, you can't please everyone and the only one that matters is yourself.

CPNEJR · 01-18-2005, 09:54 AM

personally i like the wheels that are on there now but it's really up to what you like

i think that those wheels should be on a car rather than a truck IMO

GreyHoundSteve · 01-18-2005, 10:13 AM

I agree with most of the others that you need to either drop the truck more, add more tire or go with another rim. Big rims only look right on slammed trucks and imo stepsides look better with smaller rims and more tire.

67ChevyRedneck · 01-18-2005, 10:31 AM

To be perfectly honest, I really like what is on the truck now. 5-stars are pretty cool, kinda like torque thurst, but not really...

5150 · 01-18-2005, 12:53 PM

I guess if I decided to go with that wheel I'm not sure what tire to go with to try to fill the wheel well more. Like I said up top I have 4 inch drop springs in the rear. On this pic some PO heated the springs. I have since bought the drop springs and they are on it now. I love the pic that Brainchild did, on the other hand my wife says they look like they should be on a car also. I really think with a little more tire they would look okay, I'm just having a hard time.

dion · 01-18-2005, 01:44 PM

If it were my truck I'd keep the wheels that are on there and just bring the truck down some.

Purs · 01-18-2005, 04:05 PM

are the wheels you have now aluminum or steel? I'm looking for a set of aluminum one's for when I go to the strip....

speesh · 01-18-2005, 04:07 PM

If you can'd decide, keep the ones you have and spend the $$$$$$$$$$ on a paint job!

5150 · 01-18-2005, 06:51 PM

Hey Purs-They are steel

Speesh, the paint will be finished next week see this:

http://67-72chevytrucks.com/vboard/s...90#post1096890

01-18-2005, 01:50 AM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Opinions on these wheels Guys I need opinions on these wheels. The pic is of some 18's . I know it's a crappy photoshop job, but it's the best my friend could do. I have 15's on there right now, so I know it's hard to get an accurate guess on how much they will fill the wheel well. thanks Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 02:41 AM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Well, the rear is dropped 4 inches. I really think that they look like they are 15's or 16's in the pic. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 02:46 AM	#4
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Here's what's on it now Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 03:16 AM	#5
woodman13 woodman13 Join Date: Jul 2004 Location: Moody, Tx Posts: 261	Rims look good....but I agree needs the ass end dropped more! __________________ Woodman13 2007 Dodge Ram 3500 5.9 rolling coal! 1994 Caprice 9C1 88K miles, LT-1, dropped/shaved 1967 C-30 350 4 sp dually 1971 C10 SWB BBC, auto; good driver

01-18-2005, 04:02 AM	#6
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Something like this looks better.I like the Dragstars myself,but then I always have. Attached Images __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

01-18-2005, 02:35 AM	#2
Liftedassdodge The Stunt Guy Join Date: May 2003 Location: Danville, ca Posts: 132	needs more of a drop if you ask me, but nice rims

01-18-2005, 04:51 AM	#7
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Needs alittle more tire... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-18-2005, 06:10 AM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I liike the Cariagars on there...looks mean/tough.

01-18-2005, 08:33 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Wheels,OK.Need rubber.Looks better in 2nd,lower picture.I`ll take the Drag Stars. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-18-2005, 09:49 AM	#10
shuttermutt Don't say "Oops!", Doctor Join Date: Nov 2003 Location: Houston, TX Posts: 677	Frankly, I really don't like those wheels. I don't think I'd like them on any vehicle, but they really don't look like they belong on a truck to me. Then again, you can't please everyone and the only one that matters is yourself. __________________ 'Mutt 1968 CST LWB: R.I.P. 1967 Chevelle: TPI 454 beast 1967 C10 SWB: Claimed when Bumpster didn't put it on his list

01-18-2005, 09:54 AM	#11
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	personally i like the wheels that are on there now but it's really up to what you like i think that those wheels should be on a car rather than a truck IMO __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

01-18-2005, 10:13 AM	#12
GreyHoundSteve Registered User Join Date: Oct 2004 Location: DFW TX Posts: 769	I agree with most of the others that you need to either drop the truck more, add more tire or go with another rim. Big rims only look right on slammed trucks and imo stepsides look better with smaller rims and more tire.

01-18-2005, 10:31 AM	#13
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	To be perfectly honest, I really like what is on the truck now. 5-stars are pretty cool, kinda like torque thurst, but not really... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-18-2005, 12:53 PM	#14
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	I guess if I decided to go with that wheel I'm not sure what tire to go with to try to fill the wheel well more. Like I said up top I have 4 inch drop springs in the rear. On this pic some PO heated the springs. I have since bought the drop springs and they are on it now. I love the pic that Brainchild did, on the other hand my wife says they look like they should be on a car also. I really think with a little more tire they would look okay, I'm just having a hard time. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 01:44 PM	#15
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	If it were my truck I'd keep the wheels that are on there and just bring the truck down some. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts



Register or Log In To remove these advertisements.

01-18-2005, 04:05 PM	#16
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	are the wheels you have now aluminum or steel? I'm looking for a set of aluminum one's for when I go to the strip.... __________________ "Experience is what you get when you didn't get what you wanted."

01-18-2005, 04:07 PM	#17
speesh Senior Member Join Date: Jul 2001 Location: Ridgecrest, CA Posts: 318	If you can'd decide, keep the ones you have and spend the $$$$$$$$$$ on a paint job! __________________ 57 suburban(sitting in the driveway), 2 69 C20 longbeds (sitting in the field ) and a 2003 8.1 Suburban Endeavor to persevere. "All of a sudden, I'm the old timer!" Some old timer on American Pickers.

01-18-2005, 06:51 PM	#18
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Hey Purs-They are steel Speesh, the paint will be finished next week see this: http://67-72chevytrucks.com/vboard/s...90#post1096890 __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.