How much is this worth guys? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AdamInTN · 01-26-2005, 06:08 PM

I found a 67 short step side with no motor or trany. The cab is is grate condition no rust anywhere. the bed is ok some rust along the fender well and the wood is gone. The front clip in complete with some small dings. No bumpers though. Im think of offering 350. Do you guys think thats to hight or low for my intial offer, and what do you guys think it might be worth.
Thanks
Adam

spencra · 01-26-2005, 06:24 PM

Do you have any pics, also what kind of options does it have? Sounds like a good price from what you have mentioned.

rustyold72 · 01-26-2005, 06:29 PM

Always start low, you can always go up, but can't go down. I've seen trucks like this, in this area, go for about $3-$500
Good luck
BTW pics always help in posts like these

AdamInTN · 01-26-2005, 06:31 PM

No I dont have any pics yet. I saw it today and stoped but no one was home. Im not sure about any thing else. When I find out more I will post it.

spencra · 01-26-2005, 06:43 PM

I would say that the best you could do is ask the person if they are willing to sell it. They might just practically give it to you to get rid of it. Maybe they will give you a price first that might be lower than your offer. Feel them out first and let them offer a price and then you can go from there.

AdamInTN · 01-26-2005, 07:59 PM

At this point im just hoping they call me. Anyone know where a cheap 383 is

**VetteVet** · 01-26-2005, 08:06 PM

Make sure you can get a clear title unless you are just planning to part it out.
VetteVet

**special-K** · 01-27-2005, 09:42 PM

Do you mean,how expensive a 383 is?I ask this`cause it cost more to build a 383 than a standard size small block.It`s a custom engine.The cheapest kit to build one from a 350(on top of rebuild cost)is about $700.

Tx Firefighter · 01-27-2005, 10:01 PM

Quote:

Originally Posted by special-K

The cheapest kit to build one from a 350(on top of rebuild cost)is about $700.

You should try Speed-o-motive. The've been selling stroker kits for about 50 years or so. Cheap too.

incoma · 01-27-2005, 10:31 PM

495 for the kit I believe. $1400 for a complete long block...does that sound right. I guess I could stop being lazy and go get their catalog, but I think I want to continue being lazy.

chickenwing · 01-27-2005, 11:41 PM

Spencra has the right hagglin technique down. If it's been sittin a long time the owner just might GIVE it to ya to be rid of his eyesore. I have gotten 2 free Datsun Z's by just askin "What's the story on that Z?"
I'll second the be sure and get a title bit too. My worst screw up (and where I used up ALL of my lifetime luck allowance) was when I traded a 77Silverado longbed for a 75 shortstep. I demanded to keep my drive train. The guy said ok so I swapped em out. Went to finish up the paperwork and he had a lost title application in hand! I knew I was screwed. Shoulda swapped the motors back and ran. Didn't. Truck ended up being a stolen vehicle. Luckily, (not wishin anything bad on the ole boy) the po had died. His missus just wanted to see the truck one more time and then signed it over to me.

Oh. In answer to your question, I consider $500 and less a fair buy on a non-running, fairly complete parts car/truck. But offer even less.

5150 · 01-28-2005, 12:48 AM

Adam-Where are you from in TN?

meathead95 · 01-28-2005, 04:50 PM

id offer him a 100$ i have bought more for less around these parts

01-26-2005, 06:08 PM	#1
AdamInTN Registered User Join Date: Jan 2005 Posts: 11	How much is this worth guys? I found a 67 short step side with no motor or trany. The cab is is grate condition no rust anywhere. the bed is ok some rust along the fender well and the wood is gone. The front clip in complete with some small dings. No bumpers though. Im think of offering 350. Do you guys think thats to hight or low for my intial offer, and what do you guys think it might be worth. Thanks Adam

01-26-2005, 06:24 PM	#2
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Do you have any pics, also what kind of options does it have? Sounds like a good price from what you have mentioned. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-26-2005, 06:29 PM	#3
rustyold72 Registered User Join Date: Oct 2003 Location: Ark City KS Posts: 505	Always start low, you can always go up, but can't go down. I've seen trucks like this, in this area, go for about $3-$500 Good luck BTW pics always help in posts like these __________________ 71 Chevy C10 "The Rust Bucket" 72 Chevy C10 apart in the garage 02 WS6 T/A Fast Black and bad@$$ 93 Nissan Pathfinder "Emily" Totaled RIP girl 05 Jeep Grand Cherokee-HEMI powered 87 Iroc Z28 305 TPI auto (crying out for an LS1 swap)

01-26-2005, 06:31 PM	#4
AdamInTN Registered User Join Date: Jan 2005 Posts: 11	No pics No I dont have any pics yet. I saw it today and stoped but no one was home. Im not sure about any thing else. When I find out more I will post it. __________________ Thanks Guys Adam

01-26-2005, 06:43 PM	#5
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	I would say that the best you could do is ask the person if they are willing to sell it. They might just practically give it to you to get rid of it. Maybe they will give you a price first that might be lower than your offer. Feel them out first and let them offer a price and then you can go from there. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-26-2005, 07:59 PM	#6
AdamInTN Registered User Join Date: Jan 2005 Posts: 11	At this point im just hoping they call me. Anyone know where a cheap 383 is __________________ Thanks Guys Adam

01-26-2005, 08:06 PM	#7
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,717	Make sure you can get a clear title unless you are just planning to part it out. VetteVet __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

01-27-2005, 09:42 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Do you mean,how expensive a 383 is?I ask this`cause it cost more to build a 383 than a standard size small block.It`s a custom engine.The cheapest kit to build one from a 350(on top of rebuild cost)is about $700. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-27-2005, 10:31 PM	#10
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	495 for the kit I believe. $1400 for a complete long block...does that sound right. I guess I could stop being lazy and go get their catalog, but I think I want to continue being lazy.

01-27-2005, 11:41 PM	#11
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Spencra has the right hagglin technique down. If it's been sittin a long time the owner just might GIVE it to ya to be rid of his eyesore. I have gotten 2 free Datsun Z's by just askin "What's the story on that Z?" I'll second the be sure and get a title bit too. My worst screw up (and where I used up ALL of my lifetime luck allowance) was when I traded a 77Silverado longbed for a 75 shortstep. I demanded to keep my drive train. The guy said ok so I swapped em out. Went to finish up the paperwork and he had a lost title application in hand! I knew I was screwed. Shoulda swapped the motors back and ran. Didn't. Truck ended up being a stolen vehicle. Luckily, (not wishin anything bad on the ole boy) the po had died. His missus just wanted to see the truck one more time and then signed it over to me. Oh. In answer to your question, I consider $500 and less a fair buy on a non-running, fairly complete parts car/truck. But offer even less. __________________ The truck... you hear that? No really, you did hear that?!!!

01-28-2005, 12:48 AM	#12
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Adam-Where are you from in TN? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-28-2005, 04:50 PM	#13
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	id offer him a 100$ i have bought more for less around these parts __________________ 72 2wd blazer 72 swb 4x4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.