Restored Black Seat Belt Style Console - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PT'S 70 CST · 01-27-2005, 01:36 AM

This is a super nice restored black console that has been stripped down to the bare fiberglass and painted the correct satin semi gloss black, all of the nuts and bolts were either polished or painted and the chrome is in GC. this console is crack free, the ash tray has a small ding on the top but it is not that bad I have ordered a new ash tray from GM and will replace this one for what it cost me. I am asking 200.00 plus shipping as is or with the new ash tray 218.00 plus shipping. This one is very nice (The bow tie emblem has also been polished)

I have promised HeavyD first dibs on the console and will wait a day or so for his reply.

PT

PT'S 70 CST · 01-27-2005, 01:42 AM

more pics

svgould · 01-27-2005, 05:26 PM

What did you use to strip it all the way down to the fiberglass? I'm looking to do the same thing?

PT'S 70 CST · 01-27-2005, 06:02 PM

I use a product called tail strip made by bondo, it takes about 4 cans per console. I spray it on and let it sit for about 15 min. then take a scotch brite pad and rub it down, you will have to repeat this step several times before you get it completly stripped. This is the part that is very time consuming and the can of tail strip is about 4.50 per can. I will have about 30-35 bucks in stripper and paint then the time to do it. This is the best way that I have found to strip them, this is about my 20th console that I have done. (hope this helps you and you will have to use gloves) You can find tail strip at your local auto parts store.

PT

HeavyD · 01-27-2005, 10:52 PM

I have decided to purchase this fine console from PT.

svgould · 01-28-2005, 08:25 AM

Thanks for the info PT'S 70 CST!! I appreciate it.

**GSFMECH** · 01-29-2005, 04:21 AM

PT,
Sorry to butt in on this thread but do you have the GM part number for the ashtray? Thanks,
Mike

PT'S 70 CST · 01-29-2005, 09:55 AM

No I do not have the # but I can call my buddy at the dealership and get it or when the two that I ordered come in I can let you know. I think they were about 17 0r 18 bucks each.

PT

**GSFMECH** · 01-29-2005, 06:55 PM

Hey Thanks PT. I would sure appreciate it. My dealer is not plugged in on the old parts unless you come equipped with a part number. Thanks,
Mike

Longhorn Man · 01-29-2005, 08:47 PM

PT...where would one find that paint you used...and was it spray bomb...if not, can it be purchased as so?
Mine turned out OK, but it looks like cat crap compaired to yours. That is a fine job you have done there.

PT'S 70 CST · 01-29-2005, 09:20 PM

It is a match to the super close match to the GM part # that my buddy pulled up.
It is spray bomb Duplicolor semi gloss black (I think it is # 1603) but I am at work at the moment and will try to let you know the exact # in the morning. You can buy it in Advance. You want to spray it in a fairly warm place around 60 deg. or better , I have tried to spray it when it was a little colder and have got a milky look from it.

Hope this helps you PT

Longhorn Man · 01-29-2005, 09:44 PM

Duplicolor semigloss black...is this regular spray paint, or a vinal dye?

PT'S 70 CST · 01-30-2005, 04:44 AM

Spray paint

Longhorn Man · 01-30-2005, 11:33 AM

Sweet...thanks for the info.

PT'S 70 CST · 01-30-2005, 03:29 PM

The # is DA1603 semi-gloss black

PT

*Gee_Emm* · 01-30-2005, 03:58 PM

3940479 for the ashtray, got mine at the Truck shop in California, came in a GM box, $13

If anyone is looking to paint a console, I would recommend SEM Viynl and plastic paint. Landau Black is the color name for black, get the pre primer too. I have had very good results using this product, its great for door panels, Blazer door caps, seat belt retractor covers and seat back covers too.

01-27-2005, 01:36 AM	#1
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Restored Black Seat Belt Style Console This is a super nice restored black console that has been stripped down to the bare fiberglass and painted the correct satin semi gloss black, all of the nuts and bolts were either polished or painted and the chrome is in GC. this console is crack free, the ash tray has a small ding on the top but it is not that bad I have ordered a new ash tray from GM and will replace this one for what it cost me. I am asking 200.00 plus shipping as is or with the new ash tray 218.00 plus shipping. This one is very nice (The bow tie emblem has also been polished) I have promised HeavyD first dibs on the console and will wait a day or so for his reply. PT Attached Images __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops Last edited by PT'S 70 CST; 01-27-2005 at 01:44 AM.

01-27-2005, 01:42 AM	#2
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	console pics more pics Attached Images __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-27-2005, 05:26 PM	#3
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Console What did you use to strip it all the way down to the fiberglass? I'm looking to do the same thing? __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

01-27-2005, 06:02 PM	#4
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	I use a product called tail strip made by bondo, it takes about 4 cans per console. I spray it on and let it sit for about 15 min. then take a scotch brite pad and rub it down, you will have to repeat this step several times before you get it completly stripped. This is the part that is very time consuming and the can of tail strip is about 4.50 per can. I will have about 30-35 bucks in stripper and paint then the time to do it. This is the best way that I have found to strip them, this is about my 20th console that I have done. (hope this helps you and you will have to use gloves) You can find tail strip at your local auto parts store. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops Last edited by PT'S 70 CST; 01-27-2005 at 06:05 PM.

01-27-2005, 10:52 PM	#5
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	I have decided to purchase this fine console from PT. __________________ "You can take the man out of PA, but you can't take PA out of the man"

01-28-2005, 08:25 AM	#6
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Thanks for the info PT'S 70 CST!! I appreciate it. __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

01-29-2005, 04:21 AM	#7
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	PT, Sorry to butt in on this thread but do you have the GM part number for the ashtray? Thanks, Mike __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

01-29-2005, 09:55 AM	#8
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	No I do not have the # but I can call my buddy at the dealership and get it or when the two that I ordered come in I can let you know. I think they were about 17 0r 18 bucks each. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-29-2005, 06:55 PM	#9
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Hey Thanks PT. I would sure appreciate it. My dealer is not plugged in on the old parts unless you come equipped with a part number. Thanks, Mike __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

01-29-2005, 08:47 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	PT...where would one find that paint you used...and was it spray bomb...if not, can it be purchased as so? Mine turned out OK, but it looks like cat crap compaired to yours. That is a fine job you have done there.

01-29-2005, 09:20 PM	#11
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	It is a match to the super close match to the GM part # that my buddy pulled up. It is spray bomb Duplicolor semi gloss black (I think it is # 1603) but I am at work at the moment and will try to let you know the exact # in the morning. You can buy it in Advance. You want to spray it in a fairly warm place around 60 deg. or better , I have tried to spray it when it was a little colder and have got a milky look from it. Hope this helps you PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-29-2005, 09:44 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Duplicolor semigloss black...is this regular spray paint, or a vinal dye?

01-30-2005, 04:44 AM	#13
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Spray paint __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-30-2005, 11:33 AM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Sweet...thanks for the info.

01-30-2005, 03:29 PM	#15
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	The # is DA1603 semi-gloss black PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops



Register or Log In To remove these advertisements.

01-30-2005, 03:58 PM	#16
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	3940479 for the ashtray, got mine at the Truck shop in California, came in a GM box, $13 If anyone is looking to paint a console, I would recommend SEM Viynl and plastic paint. Landau Black is the color name for black, get the pre primer too. I have had very good results using this product, its great for door panels, Blazer door caps, seat belt retractor covers and seat back covers too. Last edited by Gee_Emm; 01-30-2005 at 04:01 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.