checking interest in front end parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tnblazerk5** · 01-30-2005, 12:14 PM

i am getting a 73 to 78 chevy 2 wheel drive truck in and wanting to know if anybody would want the front end(disk brake to disk brake)to put under there 67-72 truck

*Randy70C-10* · 01-30-2005, 01:01 PM

Those front ends are a direct swap, you can bolt the entire 73-78 crossmember to a 67-72. You should put it on the parts board.

Longhorn Man · 01-30-2005, 01:09 PM

Why couldn't you be closer?

Actually, in a couple years, I may do this to the longhorn.
I might just slip a later one ton suspention under to though.

**tnblazerk5** · 01-30-2005, 01:35 PM

whats it worth ?

**tnblazerk5** · 01-30-2005, 05:27 PM

FirstGen · 01-30-2005, 06:27 PM

anywhere between 75-200 depending on location and condition of parts.

CHEVYE · 01-31-2005, 12:57 PM

yeah, about $100.

67chevemall · 01-31-2005, 01:38 PM

I this the 8 lug front end?

**tnblazerk5** · 02-02-2005, 12:57 PM

no its a 5 lug

01-30-2005, 12:14 PM	#1
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	checking interest in front end parts i am getting a 73 to 78 chevy 2 wheel drive truck in and wanting to know if anybody would want the front end(disk brake to disk brake)to put under there 67-72 truck

01-30-2005, 06:27 PM	#6
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	anywhere between 75-200 depending on location and condition of parts. __________________ 1968 C10 build in process TT LSA/6L90e/9"

01-31-2005, 12:57 PM	#7
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	yeah, about $100. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-31-2005, 01:38 PM	#8
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	I this the 8 lug front end? __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-30-2005, 01:01 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Those front ends are a direct swap, you can bolt the entire 73-78 crossmember to a 67-72. You should put it on the parts board.

01-30-2005, 01:09 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Why couldn't you be closer? Actually, in a couple years, I may do this to the longhorn. I might just slip a later one ton suspention under to though.

01-30-2005, 01:35 PM	#4
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	whats it worth ?

01-30-2005, 05:27 PM	#5
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598

02-02-2005, 12:57 PM	#9
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	no its a 5 lug



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.