blazer fuel tank and gm sending unit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

victoryauto · 02-02-2005, 10:27 PM

I have a new 31 gallon blazer fuel tank and gm sending unit still in box. I was going to use this setup but I ended up using a 16 gallon plastic fuel cell between the rails. I will take $150 plus shipping for both.

c-1072 · 02-02-2005, 10:33 PM

what year blazer ? Is it a stock set up ?

victoryauto · 02-02-2005, 10:44 PM

It was for 75 to 78 blazer for between the frame rails. It is for a stock setup. It is a pretty big tank.

incoma · 02-03-2005, 12:14 AM

Can you pm me some measurements of the tank? I'm interested in it, but want to get a better idea if it will fit on a 67-72 truck. I could pick it up this weekend if it would work.

victoryauto · 02-03-2005, 12:24 AM

I will send out a PM tomorrow evening.

victoryauto · 02-03-2005, 07:50 PM

PM sent

HuggerCST · 02-03-2005, 08:25 PM

I'd like to have the measurements too if it's not sold.

victoryauto · 02-03-2005, 08:36 PM

PM sent

victoryauto · 02-23-2005, 03:49 AM

ttt

02-02-2005, 10:27 PM	#1
victoryauto Registered User Join Date: Sep 2004 Location: natchitoches, louisiana Posts: 112	blazer fuel tank and gm sending unit I have a new 31 gallon blazer fuel tank and gm sending unit still in box. I was going to use this setup but I ended up using a 16 gallon plastic fuel cell between the rails. I will take $150 plus shipping for both.

02-02-2005, 10:33 PM	#2
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	tank what year blazer ? Is it a stock set up ?

02-03-2005, 08:25 PM	#7
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I'd like to have the measurements too if it's not sold. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-02-2005, 10:44 PM	#3
victoryauto Registered User Join Date: Sep 2004 Location: natchitoches, louisiana Posts: 112	It was for 75 to 78 blazer for between the frame rails. It is for a stock setup. It is a pretty big tank.

02-03-2005, 12:14 AM	#4
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Can you pm me some measurements of the tank? I'm interested in it, but want to get a better idea if it will fit on a 67-72 truck. I could pick it up this weekend if it would work.

02-03-2005, 12:24 AM	#5
victoryauto Registered User Join Date: Sep 2004 Location: natchitoches, louisiana Posts: 112	I will send out a PM tomorrow evening.

02-03-2005, 07:50 PM	#6
victoryauto Registered User Join Date: Sep 2004 Location: natchitoches, louisiana Posts: 112	PM sent

02-03-2005, 08:36 PM	#8
victoryauto Registered User Join Date: Sep 2004 Location: natchitoches, louisiana Posts: 112	PM sent

02-23-2005, 03:49 AM	#9
victoryauto Registered User Join Date: Sep 2004 Location: natchitoches, louisiana Posts: 112	ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.