Wheels wanted! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

454_72_4X4 · 02-07-2005, 01:10 PM

I'm lookin for some aftermarket aluminum wheels to fit a 2wd chevy (5 bolt/5in pattern)
Ideally I'd like to have 15x7or8 front and 15x10 rear.
Let me know what ya got if it's my size or not.

**JDL** · 02-07-2005, 10:31 PM

How about these.

454_72_4X4 · 02-07-2005, 11:04 PM

Oh man, I'm so burnt on slots...I've had those on every vehicle I've ever owned! Actually, I think I have a set of 10's on my Regal that might fit my truck, (unilug), but it just never crossed my mind!

But since ya posted, How much and what sizes are they? Unilug?
At least you're close! That's a change.

**67sss** · 02-08-2005, 12:04 AM

I know you said aluminum after market, but here's a set. These are not mine, so I'd have to call and him how much for the set.

454_72_4X4 · 02-08-2005, 12:19 AM

hey 67,
Haven't seen a set of Appliance wheels in a while!
Don't really care for chrome wheels but those are the tires I wanna run on the rear. 295/50's aren't they?
I suppose shipping would be out of this world but would he sell just the tires? 2 or 4 wouldn't matter.

**67sss** · 02-08-2005, 12:53 AM

tires are 265/50/15, wheels are 10 and 12 in. he wants $400 for all of them or a even split $200wheels/$200 tires...tires have 200 miles or less them.

djracer · 02-08-2005, 01:06 AM

how about these for 500 plus the ride with lugs and locks? 15x7 front and 15x10 rear wheels only tires aren't worth shipping!

454_72_4X4 · 02-08-2005, 01:27 AM

dj, You read my mind!
Those are Telstars right? That's one of my first choices in wheels.
Lugs won't do me any good cause I want them for my 93 and it's metric I think.
Is that your low dollar? ($544 new out of Summit.) Trades maybe?
I see the tires disappearing in your avatar!LOL

67, 265's are just to small for a full size truck (IMHO). That's what I have on my S-10 now! Excellent price though.

djracer · 02-08-2005, 09:06 AM

I could probably do 500 with the ride but they are like new!

djracer · 02-08-2005, 09:08 AM

I am not sure if the offset will work good on a 93. the rear are 4.5 inches of backspacing.

454_72_4X4 · 02-08-2005, 11:05 AM

I'll check into the backspacing,
I'd probably go for $500 shipped if I can raise the cash. I've got some things in the works, maybe I'll get lucky!
Interested in any trades?

djracer · 02-08-2005, 03:22 PM

I really don't need much! I need to get rid of some stuff to raise the cash to finish mine!

Kevin

454_72_4X4 · 02-08-2005, 03:51 PM

That's cool. Hopefully within a week I can have the $. Waitin on payment for a motor right now. I'll have a little left over from my tax return this friday. Between those 2 I'll have the $ and i have some other options I'm workin on.
Stay in touch!

454_72_4X4 · 02-10-2005, 12:04 AM

TTT
Wantin to buy dj's but still lookin for options

5150 · 02-10-2005, 02:01 AM

I have 4 dragstar's 2 15x8's and 2 15x10's tires are in real good condition. I can get you some pics when I get home in the morning. I'd take $350 plus the ride for them.

454_72_4X4 · 02-10-2005, 02:32 AM

Quote:

Originally Posted by yellow69

I have 4 dragstar's 2 15x8's and 2 15x10's tires are in real good condition. I can get you some pics when I get home in the morning. I'd take $350 plus the ride for them.

Yea, send me some pics, or post here. Email is tbaker@nemr.net if ya need it.

What company makes them? Are they the same a Weld Pro Stars?
What size tires on 'em?

Bolt pattern is 5x5 right?

5150 · 02-10-2005, 03:37 AM

I believe they are cragars. Yes they are the same as Weld Pro Stars. I'm not exactly sure what size the tires are. My truck is at the body shop right now and hopefully will be back by next week. Here's my webpage check it out. Also they are 5 x 5's

http://www.cardomain.com/memberpage/737541

454_72_4X4 · 02-10-2005, 04:10 AM

Looks like you're gonna have a nice truck before long yellow!

I like that style wheel also, but are they aluminum? Cragar made 2 different wheels in that style. One all aluminum and the other was either all steel or steel outer rim with aluminum center. IIRC I just don't like chrome wheels cause it's just a matter of time before they start to rust.
Sounds like a good deal though. LMK the tire size and if they're all aluminum.
No huury, I'm still trying to scare up some extra $ anyway. And not havin' much luck, I might add!LOL

5150 · 02-10-2005, 04:12 AM

No they are not aluminum. They are chrome.

454_72_4X4 · 02-10-2005, 04:21 AM

Quote:

Originally Posted by yellow69

No they are not aluminum. They are chrome.

Ahhh, man. That bites. They do look nice though.
I guess I'll have to pass on 'em then. I know I'll regret it either way I choose.
If it wasn't for dj's post, yours would be first in line, but those Telstars are my favorite wheel! (This week anyway)hahaha LOL

BTW, that last pic on your cardomain site...Is that the wheels you're gonna use on your truck? That's not a bad lookin wheel either!

5150 · 02-10-2005, 04:29 AM

Thanks, they are Boyd's. I got them off Ebay. They fit the 90's model Impala. That wheel pattern will fit our trucks also. they are 17's.

02-07-2005, 01:10 PM	#1
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Wheels wanted! I'm lookin for some aftermarket aluminum wheels to fit a 2wd chevy (5 bolt/5in pattern) Ideally I'd like to have 15x7or8 front and 15x10 rear. Let me know what ya got if it's my size or not. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-07-2005, 10:31 PM	#2
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,839	How about these. Attached Images __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

02-07-2005, 11:04 PM	#3
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Oh man, I'm so burnt on slots...I've had those on every vehicle I've ever owned! Actually, I think I have a set of 10's on my Regal that might fit my truck, (unilug), but it just never crossed my mind! But since ya posted, How much and what sizes are they? Unilug? At least you're close! That's a change. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-08-2005, 12:04 AM	#4
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	I know you said aluminum after market, but here's a set. These are not mine, so I'd have to call and him how much for the set. Attached Images

02-08-2005, 12:19 AM	#5
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	hey 67, Haven't seen a set of Appliance wheels in a while! Don't really care for chrome wheels but those are the tires I wanna run on the rear. 295/50's aren't they? I suppose shipping would be out of this world but would he sell just the tires? 2 or 4 wouldn't matter. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-08-2005, 12:53 AM	#6
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	tires are 265/50/15, wheels are 10 and 12 in. he wants $400 for all of them or a even split $200wheels/$200 tires...tires have 200 miles or less them.

02-08-2005, 01:06 AM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	how about these for 500 plus the ride with lugs and locks? 15x7 front and 15x10 rear wheels only tires aren't worth shipping! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-08-2005, 01:27 AM	#8
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	dj, You read my mind! Those are Telstars right? That's one of my first choices in wheels. Lugs won't do me any good cause I want them for my 93 and it's metric I think. Is that your low dollar? ($544 new out of Summit.) Trades maybe? I see the tires disappearing in your avatar!LOL 67, 265's are just to small for a full size truck (IMHO). That's what I have on my S-10 now! Excellent price though. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-08-2005, 09:06 AM	#9
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	I could probably do 500 with the ride but they are like new! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-08-2005, 09:08 AM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	I am not sure if the offset will work good on a 93. the rear are 4.5 inches of backspacing. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-08-2005, 11:05 AM	#11
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	I'll check into the backspacing, I'd probably go for $500 shipped if I can raise the cash. I've got some things in the works, maybe I'll get lucky! Interested in any trades? __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-08-2005, 03:22 PM	#12
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	I really don't need much! I need to get rid of some stuff to raise the cash to finish mine! Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-08-2005, 03:51 PM	#13
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	That's cool. Hopefully within a week I can have the $. Waitin on payment for a motor right now. I'll have a little left over from my tax return this friday. Between those 2 I'll have the $ and i have some other options I'm workin on. Stay in touch! __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-10-2005, 12:04 AM	#14
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	TTT Wantin to buy dj's but still lookin for options __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-10-2005, 02:01 AM	#15
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	I have 4 dragstar's 2 15x8's and 2 15x10's tires are in real good condition. I can get you some pics when I get home in the morning. I'd take $350 plus the ride for them. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

02-10-2005, 03:37 AM	#17
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	I believe they are cragars. Yes they are the same as Weld Pro Stars. I'm not exactly sure what size the tires are. My truck is at the body shop right now and hopefully will be back by next week. Here's my webpage check it out. Also they are 5 x 5's http://www.cardomain.com/memberpage/737541 __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-10-2005, 04:10 AM	#18
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Looks like you're gonna have a nice truck before long yellow! I like that style wheel also, but are they aluminum? Cragar made 2 different wheels in that style. One all aluminum and the other was either all steel or steel outer rim with aluminum center. IIRC I just don't like chrome wheels cause it's just a matter of time before they start to rust. Sounds like a good deal though. LMK the tire size and if they're all aluminum. No huury, I'm still trying to scare up some extra $ anyway. And not havin' much luck, I might add!LOL __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-10-2005, 04:12 AM	#19
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	No they are not aluminum. They are chrome. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-10-2005, 04:29 AM	#21
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Thanks, they are Boyd's. I got them off Ebay. They fit the 90's model Impala. That wheel pattern will fit our trucks also. they are 17's. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.