Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-08-2005, 02:10 PM | #1 |
Registered User
Join Date: Nov 2004
Location: Western Ky
Posts: 56
|
Question on angle plugs
I have a 1974 400 small block destoked to a 377. It has performer rpm straight plug heads. Im planning to buy some victor jr. heads which are angle plug. What is the difference and will angle plug fit on my block.
__________________
1969 c10 2wd 377 destroked 500hp - In Planning stages of a 700hp 8-71 blown 406 sb 1990 ranger 2.3L 250k and counting I want my truck to have enough power that im afraid to put it to the floor |
02-08-2005, 02:48 PM | #2 |
Mike
Join Date: Jan 2003
Location: west chester pa
Posts: 2,474
|
What they might not fit is Your exhaust,cast or headers.
__________________
70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires |
02-08-2005, 03:16 PM | #3 |
Weekend Warrior
Join Date: Oct 2004
Location: CT
Posts: 1,787
|
running headers or cast manifolds? - i would hope headers with that HP level
You might have a tough time finding headers to fit. they make them for '67-'69 Camaros i think - supercomps you might have to have some made depending on your application. regualr headers might work..but you will have to "dent" a few primaries to get the plugs in...and then the wire boots might be too close (burn) use "shorter" "header plugs" to gain a little clearance i had a set of original casting angle plug heads and nothing fit well but a set of RamHorns.
__________________
-'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered |
02-08-2005, 03:47 PM | #4 |
Registered User
Join Date: Nov 2004
Location: Western Ky
Posts: 56
|
i have headers but i hope that i can find something can can fit i really like those victor jr. heads. Thanks for the info.
__________________
1969 c10 2wd 377 destroked 500hp - In Planning stages of a 700hp 8-71 blown 406 sb 1990 ranger 2.3L 250k and counting I want my truck to have enough power that im afraid to put it to the floor |
02-08-2005, 08:15 PM | #5 |
Senior Member
Join Date: Dec 2001
Location: Redding,CA...USA
Posts: 4,736
|
Hooker super comps work with angle plug heads. I have a 1 year old set 1 5/8x 2 1/2 I just took off my truck...200 plus the ride
__________________
It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA |
02-09-2005, 01:56 PM | #6 |
Registered User
Join Date: Nov 2004
Location: Western Ky
Posts: 56
|
Thanks for the info but i saw on their website and i need the 1 3/4 x 3 plus itll be a while before i can get new heads dont have enough $$$$$$$$$$$
__________________
1969 c10 2wd 377 destroked 500hp - In Planning stages of a 700hp 8-71 blown 406 sb 1990 ranger 2.3L 250k and counting I want my truck to have enough power that im afraid to put it to the floor |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|