02-08-2005, 11:39 PM | #1 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
70 SWB Fleet F/S 2wd
I am thinking of selling my 70 short wide box. I bought this truck off a member in SC, and the truck has all the normal rust for a southern truck cab corners part of drivers floor and inner outer rockers. It's way way better than any salt belt truck, the bed is very straight and not rusty front fenders are good pass has normal battery leak rot, frame straight and clean. The exterior is orange with white top. This was 6cyl 3 on the tree truck, pedals are still in the truck but I have since added a automatic tilt and billet wheel from grant, I have got a set of CST buckets for it just sitting in the truck. It has two 15X10 weld rodlites with cooper cobra 295 50's out back have one front rodlite 15x8 no tire all the wheels are new (saving for the last one) I have a complete 3 inch drop spindle set up forget brand. I bought bb mounts and Z-bar, and I have a rebuilt 454 30 over with basic flat top pistons and rv cam rebuild, new zoom clutch pack and borg and warner super t 10 tranny also I have got a hurst comp plus shifter and linkage with two sticks to make the shifter fit your preference. This is a no option short bed coil sprung truck that I bought just last year and stored inside since. I bought a new dash pad off this board, I think thats about it I can't load pics so pm your email address and I will get some pics I am gone 6 out of 7 days a week so if I am slow to reply please keep that in mind thanks Mike Reason for selling: want to get a 4x4 burb to haul the fam Mike
__________________
hav'n fun be'n me |
02-08-2005, 11:44 PM | #2 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
short bed
oops sorry price is 3200 and I know that is less by far than I have in it but i am hoping to recover some of my cash to offset the price of the burb I am open to offers and would split the truck and motor tranny up the rest of the parts its all or none thanks Mike
__________________
hav'n fun be'n me |
02-09-2005, 08:19 AM | #3 |
Registered User
Join Date: Feb 2005
Posts: 14
|
Post up some pics or send them to me at twinks@zoominternet.net
Im in PA and Ive been looking for a C-10 for a while, Ohio shouldnt be too far of a drive. What all is wrong with it and what needs to be fixed? |
02-09-2005, 09:45 AM | #4 |
"GO DAWGS"
Join Date: Oct 2003
Location: Batesburg, SC. 29006
Posts: 5,410
|
Hey mudd is that the truck you bought from me if so it is a 72
PT
__________________
70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops |
02-09-2005, 12:39 PM | #5 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
correction
The previous owner PT corrected me this is a 72 truck
Will get pics this afternoon (night shift) Zoomy motor and tranny are complete minus carb an go with the truck for 32oo or will sell the motor and tranny as a unit thanks for looking Mike Also I have the complete ac brackets etc for 454 and power steering goodies for the motor this truck has man steering and man brakes I do have an AC cab that I would let who ever buys the truck raid for any and all ac goodies that truck is the 70 sorry for the confusion Mike
__________________
hav'n fun be'n me |
02-09-2005, 04:29 PM | #6 |
Registered User
Join Date: Feb 2005
Posts: 14
|
Ok, so this is a '72, correct? That means it has disk brakes too? Anyways, is there anything wrong with it at all?
|
02-09-2005, 06:33 PM | #7 |
Registered User
Join Date: Feb 2005
Posts: 14
|
|
02-09-2005, 08:56 PM | #8 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
pics
got a ton of pics need help posting thanks Mike
__________________
hav'n fun be'n me |
02-09-2005, 09:43 PM | #9 |
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
do you have microsoft paint? if so just go in it and click on "file" then click on "open" and go to "my pictures" and click on the ones you want. then go in "image" on paint and go to 'stretch/skew" and reduce them down to 20% or so if they`re 5 megapixel, then post them here. if you email me some, i`ll try to post em for ya. it`s tweed78@hotmail.com but i`m at work and it might take awhile.
__________________
85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback |
02-10-2005, 02:20 AM | #10 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
truck
still trying to get pics up without success I suck at this !!!! anyway had an offer on the motor and tranny would prefer to sell as a complete truck also I have the air and pwr steering stuff off the 454 as well as a spare air cab that the new owner could raid for all of the air stuff they want lets deal !! Mike
__________________
hav'n fun be'n me Last edited by muddyole 69; 02-10-2005 at 02:33 AM. |
02-10-2005, 02:28 AM | #11 |
my gas saver
Join Date: Sep 2003
Location: Clarksville, TN
Posts: 2,046
|
i`m stumped on your pics too??? it won`t let me post them for nothing, i`ve never had this happen???
__________________
85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback |
02-10-2005, 02:38 AM | #12 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
pics
[IMG]http://[/IMG]
__________________
hav'n fun be'n me |
02-10-2005, 02:51 AM | #13 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
more pics
last set
__________________
hav'n fun be'n me |
02-10-2005, 02:56 AM | #14 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
pics
got a few more sorry for the quality of pics
__________________
hav'n fun be'n me |
02-11-2005, 12:27 AM | #15 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
72 swb for sale
Boy these move down the ladder fast have more pics motivated seller lets deal thanks Mike
__________________
hav'n fun be'n me |
02-11-2005, 02:17 AM | #16 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
72 swb for sale
Will have to pull a valve cover and get back to you Mike
__________________
hav'n fun be'n me |
02-11-2005, 11:47 AM | #17 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
Truck
Deal pending thanks Steve
__________________
hav'n fun be'n me |
02-17-2005, 08:43 PM | #18 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
truck revised
same truck less drop parts
__________________
hav'n fun be'n me |
02-18-2005, 08:14 PM | #19 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
72 short wide
ttt
__________________
hav'n fun be'n me |
02-22-2005, 02:54 AM | #20 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
good deal ?
Hi ho hi ho last time then off to ebay she goes !!!
__________________
hav'n fun be'n me |
02-22-2005, 02:59 AM | #21 |
"GO DAWGS"
Join Date: Oct 2003
Location: Batesburg, SC. 29006
Posts: 5,410
|
Guys this is a fairly solid truck and the bed does not have a ding in it if I remember correctly. This would make a nice truck with a little TLC. (previous owner)
PT
__________________
70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops |
02-22-2005, 05:04 AM | #22 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
truck
Guys this truck had a member wanting it then some stuff came up to be polite I am leaving that alone. Thanks Paul for the bump, and yep it is a straight truck with all the parts would make an excellent project i just have no time for it due to declining health of my wife, and i was gonna buy a burb that was running and driveable . Zoomy I no longer have the drop spindles etc but all else it there i have a 22 gallon RCI fuel cell I would throw in to sweeten up the deal i need to sell so I am taking it thru the board this last time and then i will try ebay if nothing else i will put together and sell just wanted to devote my time to other things thanks for the interest Mike
__________________
hav'n fun be'n me |
02-22-2005, 11:47 AM | #23 |
Active Member
Join Date: Dec 2004
Location: Tucson, AZ
Posts: 233
|
The burb is still for sale. Good luck. Thanks Rick
|
03-19-2005, 08:37 PM | #24 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
Ttt
Here ya go Clint let me know if you are interested Mike
__________________
hav'n fun be'n me |
03-20-2005, 12:34 AM | #25 |
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
72 short wide
truck is sold thanks Clint !! Motor trans etc still for sale pm and we can talk mike
__________________
hav'n fun be'n me |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|