got drivers side rocker replace today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 02-14-2005, 07:44 PM

billsbowtie · 02-14-2005, 07:45 PM

billsbowtie · 02-14-2005, 07:45 PM

whitesswj · 02-14-2005, 07:48 PM

yea, you can now stand on that!! I love that feeling!! looks good too!!

sswj

billsbowtie · 02-14-2005, 07:49 PM

i pop rivvited it on and bondoed over the rivitts it looks a little better

skokie · 02-14-2005, 07:52 PM

That looks good. Nice job.

Deuce · 02-14-2005, 08:14 PM

Quote:

Originally Posted by billsbowtie

i pop rivvited it on and bondoed over the rivitts it looks a little better

Migs work good too

billsbowtie · 02-14-2005, 08:19 PM

i dont have a mig welder i have replaced alot of them with rivitts and have had no trouble thanks bill

Dean23 · 02-14-2005, 10:08 PM

Looks goood. You can come do mine when you are finished

Deuce · 02-14-2005, 10:12 PM

Quote:

Originally Posted by billsbowtie

i dont have a mig welder i have replaced alot of them with rivitts and have had no trouble thanks bill

I was told that if you don't weld them you could get a annoying sqeek from the 2 pieces of metal rubbing together??

Dano69c10 · 02-15-2005, 01:49 PM

Looks clean! Great job!

Jimbotronics · 02-15-2005, 01:53 PM

looks good man, good job!

shortymac83 · 02-15-2005, 01:55 PM

mine are riveted on, and they don't squeak. Then again, the rest of the truck does, so it's hard to tell lol.

Joe67 · 02-15-2005, 01:59 PM

Looks great - nice work

ezernut9mm · 02-15-2005, 02:22 PM

damn, i'm jealous. lol. looks good!

billsbowtie · 02-15-2005, 07:31 PM

thanks guys

**JIMs70GMC** · 02-15-2005, 07:39 PM

looks good, now come on down to Chesapeake and do mine!

SLS · 02-16-2005, 03:44 AM

Looks really good, Bill!

billsbowtie · 02-16-2005, 12:23 PM

sls how is your project coming alone

67ChevyRedneck · 02-16-2005, 12:33 PM

Quote:

Originally Posted by shortymac83

mine are riveted on, and they don't squeak. Then again, the rest of the truck does, so it's hard to tell lol.

Shortymac, have you had any problems with the bondo cracking? I was thinking about doing the same thing. Also, where did you put the rivvets and how did you get them "flush" with the rest of the body?

Bamm · 02-16-2005, 12:42 PM

Countersink them. Get a drill bit that is the right size where the rivet doesn't have ANY play and you'll be alright with the bondo not cracking for a little while. I'm not knocking the rivet way of doing this, but if you have any access to a mig, weld them!! Even just pop rivet them in place and see what someone will charge you if you drive up to their shop and mig them on the spot. If you've already got them prepped where they only have to hook up the ground clamp and weld and you'll come back and grind and work filler on them, it probably wouldn't cost too much. JMO...........Jerry

SLS · 02-17-2005, 10:23 AM

Bill,

Project is moving along slowly.

First child due in mid-June.......

Dad in the middle of having both hip joints replaced...

Lawncare biz been kinda slow the last few months....

02-14-2005, 07:44 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	got drivers side rocker replace today

02-14-2005, 07:48 PM	#4
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	yea, you can now stand on that!! I love that feeling!! looks good too!! sswj __________________ '01 Camaro *Son, you just can't get there from here...*

02-14-2005, 07:52 PM	#6
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	That looks good. Nice job. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

02-14-2005, 10:08 PM	#9
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	Looks goood. You can come do mine when you are finished __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

02-15-2005, 01:49 PM	#11
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Looks clean! Great job! __________________ '69 Fleet It ain't yours, if you didn't build it!

02-14-2005, 07:45 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997

02-14-2005, 07:49 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i pop rivvited it on and bondoed over the rivitts it looks a little better

02-14-2005, 08:19 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i dont have a mig welder i have replaced alot of them with rivitts and have had no trouble thanks bill

02-15-2005, 01:53 PM	#12
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	looks good man, good job! __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

02-15-2005, 01:55 PM	#13
shortymac83 hmm... Join Date: Jan 2004 Location: Culver, Indiana Posts: 1,631	mine are riveted on, and they don't squeak. Then again, the rest of the truck does, so it's hard to tell lol. __________________ 1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR.

02-15-2005, 01:59 PM	#14
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Looks great - nice work __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

02-15-2005, 02:22 PM	#15
ezernut9mm Registered User Join Date: Feb 2005 Location: kansas city, mo. Posts: 224	damn, i'm jealous. lol. looks good!

02-15-2005, 07:31 PM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	thanks guys

02-15-2005, 07:39 PM	#17
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	looks good, now come on down to Chesapeake and do mine! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-16-2005, 03:44 AM	#18
SLS Finish the'71..or bust! Join Date: Jun 2003 Location: Nashville, TN. Posts: 441	Looks really good, Bill!



Register or Log In To remove these advertisements.

02-16-2005, 12:23 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	sls how is your project coming alone

02-16-2005, 12:42 PM	#21
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Countersink them. Get a drill bit that is the right size where the rivet doesn't have ANY play and you'll be alright with the bondo not cracking for a little while. I'm not knocking the rivet way of doing this, but if you have any access to a mig, weld them!! Even just pop rivet them in place and see what someone will charge you if you drive up to their shop and mig them on the spot. If you've already got them prepped where they only have to hook up the ground clamp and weld and you'll come back and grind and work filler on them, it probably wouldn't cost too much. JMO...........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-17-2005, 10:23 AM	#22
SLS Finish the'71..or bust! Join Date: Jun 2003 Location: Nashville, TN. Posts: 441	Bill, Project is moving along slowly. First child due in mid-June....... Dad in the middle of having both hip joints replaced... Lawncare biz been kinda slow the last few months....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.