69-72 Blazer Half Top - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tommy69Z · 02-15-2005, 12:50 PM

Have had a lot of interest for this top, but I have not seen any cash. I will take $425, and will ship if needed at buyers expense! I would like it gone, but not going to give it away!

blazer1971 · 02-15-2005, 02:50 PM

pics

Tommy69Z · 02-15-2005, 08:24 PM

http://community.webshots.com/user/tommy69z

meathead95 · 02-16-2005, 03:11 PM

did you get my pm? no reply?

Tommy69Z · 02-16-2005, 05:14 PM

I did, just took it that you just want the bed floor when I get it out. I have too many projects going on right now, so it will be 2-3 weeks before I can fool with it.

meathead95 · 02-16-2005, 05:42 PM

nevermind then i have another board member going to cut me some patches out of his

Tommy69Z · 02-17-2005, 05:07 PM

do you folks not check your pms?

Chevy Muscle · 02-17-2005, 05:17 PM

too bad you're so far away. I wouldn't want to pay for shipping.

orange72blazer · 02-17-2005, 06:50 PM

I am interested in the top. I can pay for and arrange the shipping if you can put it on a pallet and load it onto a truck. I need to know the size and weight to get a shipping quote.

jrf790 · 02-24-2005, 02:08 AM

can you send me a picture , is ther a bulk head? how much to ship it to florida 33314

Tommy69Z · 02-25-2005, 08:22 AM

go to the link above, it does have the bulkhead. shipping would be $100-110

orange72blazer · 02-25-2005, 10:46 AM

Did you find out how many pounds the top is, and the size of it so I can get a shipping quote. If you can do this for me and the shipping isn't to much I'll buy the top from you.

Tommy69Z · 02-25-2005, 10:48 AM

125lbs it would be on a pallet about 4x7

orange72blazer · 02-25-2005, 12:41 PM

Will the top be shipped from a residence or a buisness? And do you have a way of loading the top into the truck?

Tommy69Z · 02-25-2005, 02:21 PM

yes it will go from a buisness and they can load it. I have been getting good quotes from rlcarriers. I used 85 as the class, 125# as the weight.

orange72blazer · 02-25-2005, 03:11 PM

The quote from my shipping company was a little cheaper than the one you gave me so I will probabally just go with the place I use. If you want to pm me with payment details I'll see if we can work something out.

Tommy69Z · 02-25-2005, 05:14 PM

you can email me at tommy_wilson@bellsouth.net

Tommy69Z · 02-25-2005, 10:23 PM

there are 3 people working a deal on this top, 1st with payment gets it!

Tommy69Z · 02-27-2005, 04:41 PM

Top is sold!

02-15-2005, 12:50 PM	#1
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	69-72 Blazer Half Top Have had a lot of interest for this top, but I have not seen any cash. I will take $425, and will ship if needed at buyers expense! I would like it gone, but not going to give it away!

02-16-2005, 03:11 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	did you get my pm? no reply? __________________ 72 2wd blazer 72 swb 4x4

02-16-2005, 05:42 PM	#6
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	nevermind then i have another board member going to cut me some patches out of his __________________ 72 2wd blazer 72 swb 4x4

02-25-2005, 02:21 PM	#15
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	yes it will go from a buisness and they can load it. I have been getting good quotes from rlcarriers. I used 85 as the class, 125# as the weight. Last edited by Tommy69Z; 02-25-2005 at 02:23 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-15-2005, 02:50 PM	#2
blazer1971 Registered User Join Date: Apr 2001 Location: apollo bch,fl. usa Posts: 134	pics

02-15-2005, 08:24 PM	#3
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	http://community.webshots.com/user/tommy69z

02-16-2005, 05:14 PM	#5
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	I did, just took it that you just want the bed floor when I get it out. I have too many projects going on right now, so it will be 2-3 weeks before I can fool with it.

02-17-2005, 05:07 PM	#7
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	do you folks not check your pms?

02-17-2005, 05:17 PM	#8
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 292	too bad you're so far away. I wouldn't want to pay for shipping.

02-17-2005, 06:50 PM	#9
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	I am interested in the top. I can pay for and arrange the shipping if you can put it on a pallet and load it onto a truck. I need to know the size and weight to get a shipping quote.

02-24-2005, 02:08 AM	#10
jrf790 Registered User Join Date: Feb 2005 Location: Denver, Co. Posts: 11	can you send me a picture , is ther a bulk head? how much to ship it to florida 33314

02-25-2005, 08:22 AM	#11
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	go to the link above, it does have the bulkhead. shipping would be $100-110

02-25-2005, 10:46 AM	#12
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Did you find out how many pounds the top is, and the size of it so I can get a shipping quote. If you can do this for me and the shipping isn't to much I'll buy the top from you.

02-25-2005, 10:48 AM	#13
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	125lbs it would be on a pallet about 4x7



Register or Log In To remove these advertisements.

02-25-2005, 12:41 PM	#14
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Will the top be shipped from a residence or a buisness? And do you have a way of loading the top into the truck?

02-25-2005, 03:11 PM	#16
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	The quote from my shipping company was a little cheaper than the one you gave me so I will probabally just go with the place I use. If you want to pm me with payment details I'll see if we can work something out.

02-25-2005, 05:14 PM	#17
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	you can email me at tommy_wilson@bellsouth.net

02-25-2005, 10:23 PM	#18
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	there are 3 people working a deal on this top, 1st with payment gets it!

02-27-2005, 04:41 PM	#19
Tommy69Z Registered User Join Date: Nov 2004 Location: muscle shoals, AL Posts: 42	Top is sold!

Register or Log In To remove these advertisements.