The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-16-2005, 07:07 PM   #1
bigunde
Rusty Rockerfeller
 
Join Date: May 2003
Location: South Georgia
Posts: 1,631
New Wiring harness issues

Just got a new engine harness from Mother Truckers for my 70 with manual and HEI.Does anyone know what colors go where and it seems to have two small wires for the starter yellow and purple but no bigger wire for the battery?any ideas?
Attached Images
 
bigunde is offline   Reply With Quote
Old 02-16-2005, 08:14 PM   #2
WRMZ71
Cause the Chicks DIG IT!!
 
WRMZ71's Avatar
 
Join Date: Nov 2003
Location: Beaufort SC
Posts: 509
I've never had a painless or any new wiring gig but from my experience most should have a seperate battery cable you buy that runs straight from the battery to the starter motor. The yellow and the purple should screw on the same post at the right side of the solenoid. Somebody else throw there input in
WRMZ71 is offline   Reply With Quote
Old 02-16-2005, 09:22 PM   #3
71meangreenc10
Its a Truck Thing......
 
71meangreenc10's Avatar
 
Join Date: Dec 2004
Location: Sierra Vista, Arizona
Posts: 3,159
The purple wire is the ignition wire that goes to the S terminal on the starter, the yellow wire goes to the other small post on the solenoid it powers the + for the coil.......
__________________
71 C10 283/3SPD Full Resto
71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599
70 C10 Suburban Former military GSA truck.
72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378
72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110
68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head
71 C30 Wrecker
71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck
68 GMC Long Stepside. They keep following me home
71 C20 Longhorn/Ole Yellor
69 C30 Former Motor Home, Flat Bed time
71meangreenc10 is offline   Reply With Quote
Old 02-16-2005, 09:32 PM   #4
bigunde
Rusty Rockerfeller
 
Join Date: May 2003
Location: South Georgia
Posts: 1,631
Ok thats why that wire is running with that new one going to my HEI
Attached Images
 
bigunde is offline   Reply With Quote
Old 02-16-2005, 09:35 PM   #5
71meangreenc10
Its a Truck Thing......
 
71meangreenc10's Avatar
 
Join Date: Dec 2004
Location: Sierra Vista, Arizona
Posts: 3,159
Thats it,,,also back up lights are light green,,,,,,,
__________________
71 C10 283/3SPD Full Resto
71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599
70 C10 Suburban Former military GSA truck.
72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378
72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110
68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head
71 C30 Wrecker
71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck
68 GMC Long Stepside. They keep following me home
71 C20 Longhorn/Ole Yellor
69 C30 Former Motor Home, Flat Bed time

Last edited by 71meangreenc10; 02-16-2005 at 09:38 PM.
71meangreenc10 is offline   Reply With Quote
Old 02-16-2005, 09:41 PM   #6
bigunde
Rusty Rockerfeller
 
Join Date: May 2003
Location: South Georgia
Posts: 1,631
Thanks yall,im sure ill have more questions when i start hooking this up.
bigunde is offline   Reply With Quote
Old 02-17-2005, 12:08 PM   #7
sneakysnake
It's a catastrophic success.
 
sneakysnake's Avatar
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
Quote:
Originally Posted by 71meangreenc10
The purple wire is the ignition wire that goes to the S terminal on the starter, the yellow wire goes to the other small post on the solenoid it powers the + for the coil.......
If its a HEI then it wont need a wire for the coil off the "I" terminal of the solinoid, that is for points to get full 12v during starting.
sneakysnake is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com