parker air ride valves with manifold f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

inprogress · 02-24-2005, 12:34 AM

Four used Parker dual acting valves with aluminium manifold block. Valves have 1/2" ports and are completely re buildable. can be used for a complete F>B>S>S> system. Or, if running cylinders, can do a push - pull set up. Unsure of max PSI rating. These were run for one season, then upgraded to a 3/4" system. I have pulled them apart and re greased them, so they are good to go. These sold new for approx. $500. Rebuild kits from Parker run approx $15 per valve and are very easy for a first timer to do on their own.$200 usd buyer is to pay shipping

inprogress · 02-24-2005, 12:46 AM

pm me or my email is insaneclownzinwi@yahoo.com

inprogress · 02-25-2005, 04:10 AM

anyone interstrested

inprogress · 02-28-2005, 04:21 PM

ok ill trade for some lowering stuff for my truck 72 with leaf springs in rear these will work in any car or truck

**raggedjim** · 03-01-2005, 12:09 AM

Sent you a pm. Rg

inprogress · 03-03-2005, 01:40 AM

still for sale

Alvin · 03-03-2005, 09:52 PM

what size line could I run on these? and this is all that's needed for f/b/s/s since they are dual action? Sorry, I know nothing about valves and fittings and line. The more I try to read up on it, the more confused I get. Thanks

02-24-2005, 12:34 AM	#1
inprogress Registered User Join Date: Feb 2005 Location: appleton wis Posts: 27	parker air ride valves with manifold f/s Four used Parker dual acting valves with aluminium manifold block. Valves have 1/2" ports and are completely re buildable. can be used for a complete F>B>S>S> system. Or, if running cylinders, can do a push - pull set up. Unsure of max PSI rating. These were run for one season, then upgraded to a 3/4" system. I have pulled them apart and re greased them, so they are good to go. These sold new for approx. $500. Rebuild kits from Parker run approx $15 per valve and are very easy for a first timer to do on their own.$200 usd buyer is to pay shipping Last edited by inprogress; 02-24-2005 at 12:50 AM. Reason: shipping

03-01-2005, 12:09 AM	#5
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,515	Sent you a pm. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

03-03-2005, 09:52 PM	#7
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	what size line could I run on these? and this is all that's needed for f/b/s/s since they are dual action? Sorry, I know nothing about valves and fittings and line. The more I try to read up on it, the more confused I get. Thanks __________________ Ethel - The Legend Continues... Ethel has been sold.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-24-2005, 12:46 AM	#2
inprogress Registered User Join Date: Feb 2005 Location: appleton wis Posts: 27	pm me or my email is insaneclownzinwi@yahoo.com

02-25-2005, 04:10 AM	#3
inprogress Registered User Join Date: Feb 2005 Location: appleton wis Posts: 27	anyone interstrested

02-28-2005, 04:21 PM	#4
inprogress Registered User Join Date: Feb 2005 Location: appleton wis Posts: 27	ok ill trade for some lowering stuff for my truck 72 with leaf springs in rear these will work in any car or truck

03-03-2005, 01:40 AM	#6
inprogress Registered User Join Date: Feb 2005 Location: appleton wis Posts: 27	still for sale



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.