![]() |
![]() |
#1 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Frame Cleanup
I was thinking about starting on the frame cleanup once the cab is off and at the blasters. I snapped some pics. What do yo guys think? It doesnt look too bad and it appears to all be surface rust if that.
" ![]() " ![]() " ![]() " ![]() " ![]() " ![]() " ![]() " ![]() " ![]() " ![]()
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 Last edited by skokie; 02-27-2005 at 02:38 AM. |
![]() |
![]() |
![]() |
#2 |
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
i got a red x on this side
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's ![]() 1993 Cherokee work ride/weekend wheeler |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Its fixed now.
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 |
![]() |
![]() |
![]() |
#4 |
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
yes it is. it should clean up
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's ![]() 1993 Cherokee work ride/weekend wheeler |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Looks like it would. I took my cordless drill out with a small wirewheel and cleaned up a 2 inch spot in about a minute. Grinder with a sanding disk should make short work out of it. Or I can get it blasted as well. Thats something to think about. But if I do that then that means I would have to powder coat it. heheh
![]()
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 |
![]() |
![]() |
![]() |
#6 |
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
you could have the whole thing blasted, it would be faster, but then sand is in every joint. just something to think about
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's ![]() 1993 Cherokee work ride/weekend wheeler |
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Quote:
![]()
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 |
|
![]() |
![]() |
![]() |
#8 |
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
dont forget your PPE (safty glasses, gloves, and some muffs...............for your ears) and dont go too crazy and buy plenty of wheels
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's ![]() 1993 Cherokee work ride/weekend wheeler |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Will do. Whats ppe?
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 |
![]() |
![]() |
![]() |
#10 |
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
personal protection equipment. sorry 'bout the abbv. in my aperenticeship we spent 16 hours on it. not fun, but it sticks with ya
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's ![]() 1993 Cherokee work ride/weekend wheeler |
![]() |
![]() |
![]() |
#11 |
Msgt USAF Ret
![]() ![]() Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,714
|
personel protective equipment
VV
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
No problem. Now I know. Btw how do you remove the bed? Is it 6 bolts or 4?
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 |
![]() |
![]() |
![]() |
#13 |
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
4 and the wiring harness
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's ![]() 1993 Cherokee work ride/weekend wheeler |
![]() |
![]() |
![]() |
#14 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
I believe it's 6 bolts at least. I know my shortbeds have 6.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#15 |
someday it will be done!
Join Date: Sep 2004
Location: Lloydminster,AB. Canada
Posts: 1,620
|
my longbed was four bolts.You'll use some degreaser on the oily spots I assume?The blaster that is doing my frame warned me about greasy spots.He said if it wasn't cleaned up,there was a chance that the blasting could force the sludge into the metal and affect the finish.This sound like a real concern or was he blowin smoke up my wazzoo?
__________________
'72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. ![]() ![]() ![]() '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics |
![]() |
![]() |
![]() |
#16 | |
Account Suspended
Join Date: May 2004
Location: Lake Placid, Florida
Posts: 930
|
Quote:
|
|
![]() |
![]() |
![]() |
#17 |
Senior Member
Join Date: Nov 2004
Location: Cleveland, Texas
Posts: 298
|
well, from my experience.. you may want to estimate the amount of time it will take you to sand the frame (long time) and multiply this times what you earn per hour at your job. This will give you idea how much it's worth for you to do. Then call a blaster and find out that it is really cheap to have them do it, and save you the hassle. I found the price out and could've died, when I realized how freaking long it took me to do it by hand! As I get older, I try to conserve my limited energy for the more kewl (and more expensive) tasks. JMHO though.
__________________
2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn) |
![]() |
![]() |
![]() |
#18 |
Msgt USAF Ret
![]() ![]() Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,714
|
I agree with saxmo
You are gonna get plenty tired of grinding and wire wheeling by hand . I am doing that on my vette and the only reason is I don't want to do a frame off
restoration. Unless you have infinite patience you will never get the frame as good as the sandblaster can. We had a cabinet blaster at work and they wouldn't touch anything with any grease or oil on it because it gummed up the media and the vacumming system. There might be something in what Rollie said about it affecting the paint finish, but I think it's just the blasters way of making sure it's clean. Vettevet
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Thanks for the great info. I think I will do this. Once I have the cab at the blasters I will take off the bed and pic a spot and see how longs it takes me. The guy who does the media blasting for me does a lot of older cars and he may let me use some space in his building while he does the cab so I can take off the bed so he can get to the frame. That brings up a question. The engine is in the truck. Can you mask off a engine and blast around it?
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
the frame needs to be degreased, before blasting.....the sand doesnt work well with grease! for the amount of time with a wire wheel(been there, & done that), i would opt for the blaster! as far as the bolts in the box.....my longhorn had 10 from the factory......its been a while since i did an 8' bed truck, but i am pretty sure you will be dealing with 8 bolts , to remove the box.......69L
__________________
http://community.webshots.com/user/hotrodhorn |
![]() |
![]() |
![]() |
#21 |
Senior Member
Join Date: Nov 2004
Location: Cleveland, Texas
Posts: 298
|
it appears that every "been there done that" guy says take it to the Blaster...
__________________
2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn) |
![]() |
![]() |
![]() |
#22 | |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
Quote:
![]()
__________________
http://community.webshots.com/user/hotrodhorn |
|
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Jan 2004
Location: Elmira, Oregon
Posts: 449
|
I blasted the bed on mine. Just can't see spending all that time with a grinder over my head. My neck and back were sore enough just from blasting it. For the curious ones I made a jig out of 4X4s and lots of bracing. Lifted the bed about 6 feet up and stood under it to do all the blasting. Those beds really aren't all that heavy.
As an aside note, the long bed should have 8 bolts holding it to the frame. |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Jul 2000
Location: Victoria,BC, Canada
Posts: 1,300
|
I'm one " been there, done that" guy who doesn't have a problem with wire wheel stripping. I did both my frame and Cab with a wire wheel. I have to admit if I could have had either done for the prices I hear mentioned on the board I would have had them sandblasted.
The way I look at it is four hours hauling it to the blasters and back even if the trips only 15 minutes ( just the frame or cab) and probably at least $750 CDN. Basically a Grand for the Cab or frame in time and cost. I make good money but I think sandblasters in my neck of the woods make more, and I'd rather be messing with my truck than working to pay him. I calculated approx eight hours work to strip my cab to metal and I only wore out one wire wheel, the frame was less time. I don't deny sandblasting is the ultimate but I think it's overpriced in my area and I have more money than time right now, but I still wire wheel. ![]()
__________________
71 GMC 1500 LWB |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
I'm also a "been there done that" guy. I took my stripped frame as well as all disassembled frame components (all front suspension components, trailing arms etc.) to a blaster and I'm REAL glad I did. About $250 for all that and he had to spend some time scraping the original undercoating off some spots. That stuff doesn't even want to come loose with sand.
__________________
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|