Autometer bezel gauges((WANTED)) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MDATXXX · 02-27-2005, 06:29 AM

I have a 82 chevy DO any one have or know anyone that has a bezel with Autometer gauges intalled in it they want to sell? I think it has to be a 81-87 bezel in order to fit mine. if any one know were I can get one please let me know, I rather buy one all ready to install cause have no time to buy gauges and do the mods, saw these pics last week and I have to it. attach a couple picture's below showing what im lookin for THX md MDATX@YAHOO.COM

TIMSPEED · 02-27-2005, 07:55 AM

No one PRE makes them, that's Jeff's setup right there. It's really not all THAT hard to do..hardest part is wiring them up. Not really that hard though...
The Guages are spensive though, I think Jeff's setup was at least $500

gconn77 · 02-27-2005, 12:14 PM

Ok... I searched the forum last night for threads about this topic... I am glad that someone else made the post and not me here... so now I can ask my question... LOL. I didn't want to make a new thread because I know that the content is here somewhere.

Anyway, can you guys reply with links to other threads in the forum that have good information and write ups on this project.. Step by step of hooking up all the gauges, wiring them, etc, modifications needed (i.e. oil sending unit, etc), installing the tach... etc.

This is a project that I will be doing soon.

Regards,
Garry

bigblock73 · 02-27-2005, 12:43 PM

Here is the write up on how I did mine...

http://www.73-87.com/7387garage/inte...ge_surface.htm

Here is Mikes write up on his...

http://www.73-87.com/7387garage/inte...s_recessed.htm

Here is one I found in an older issue of Four Wheeler magazine...

http://www.73-87.com/7387garage/inte...ashmounted.htm

I have almost $700 in mine (gauges, indicators, alum bezel, and gauge wiring harness)...but it is woth every penny if you ask me. The eaiest part of the install was the purchase and use of the Painless gauge wiring kit. It has everything you need, and good instructions, on how to install the gauges in your vehicle.

gconn77 · 02-27-2005, 12:56 PM

Thank you very much... Adding to my bookmarks.

Regards,
Garry

MDATXXX · 02-27-2005, 03:33 PM

Quote:

Originally Posted by bigblock73

Here is the write up on how I did mine...

http://www.73-87.com/7387garage/inte...ge_surface.htm

Here is Mikes write up on his...

http://www.73-87.com/7387garage/inte...s_recessed.htm

Here is one I found in an older issue of Four Wheeler magazine...

http://www.73-87.com/7387garage/inte...ashmounted.htm

I have almost $700 in mine (gauges, indicators, alum bezel, and gauge wiring harness)...but it is woth every penny if you ask me. The eaiest part of the install was the purchase and use of the Painless gauge wiring kit. It has everything you need, and good instructions, on how to install the gauges in your vehicle.

JEFF SHOOT ME A PRICE FOR YOUR BEZEL AND THE WIRE KIT?

bigblock73 · 02-27-2005, 03:35 PM

mdatxxx, I sent you a PM. My bezel isn't going anywhere...I am trying to finish my truck...not tear it apart.

*1FaastC10* · 02-27-2005, 04:24 PM

Jeff, more pics of the model please?

**smokinn** · 02-27-2005, 05:49 PM

Where did you get the metal from? Also how come you didnt cover the whole thing?

acountryclipper · 02-28-2005, 12:01 AM

that is sweet

Crush · 02-28-2005, 11:30 AM

Here is a link to Covan's Classics out of GA. He IS making a new Bezel with Gauges installed for $799. I saw him at Turkey Rod Run this year and he had one on display...it was VERY NICE!!! You can order the bezel in one of four "colors", Black, Woodgrain, Brushed Aluminum or Carbon Fiber. On the site it says that it comes with the 2 1/16 and 3 3/8 guages, but the model he had setup at TRR had the 5" and 2 5/8" gauges.

Keep in mind that this is a direct fit full new bezel...not just a billet overlay ontop of the old bezel. The fit and finish was VERY nice and the piece was pretty heavy.

Autometer Bezel

Eyegore · 02-28-2005, 12:26 PM

My son garrett was able to make his own dash similar to Jeff's, he used a newer bezel 82 up and bought all the guages and just enlarged each hole to fit the new gauges using a dremel. He also hollowed out the back of the bezel as was shown. I don't know how much he has into it since he went with a new bezel - chrome, dash pad, gauges and wire and has the patients to do this type of work. Everything works fine now he's trying to come up with something different for the turn signal lights in the dash.

Here's a pic, sorry for the quality of it.

**smokinn** · 02-28-2005, 05:35 PM

I checked out that site. No pics displayed said was coming soon.

Crush · 02-28-2005, 06:44 PM

Quote:

Originally Posted by smokinn

I checked out that site. No pics displayed said was coming soon.

Yeah...I sent him an email to see if the pics were ready yet. I know that they're available....I just ordered mine Saturday...

Slamd99Tahoe · 03-01-2005, 12:44 AM

I'll sell you mine for $600 plus shipping it's all brand new, never wired up just sitting in the truck. It looks just like the one you showed except for my Bezel is Polished Aluminum not the Brushed.

Slamd99Tahoe · 03-01-2005, 12:51 AM

Better Pic!!!

MDATXXX · 03-01-2005, 01:25 AM

Quote:

Originally Posted by LowJimmy

Better Pic!!!

CHECK YOUR PM OR EMAIL ME AT MDATX@YAHOO.COM

Crush · 03-01-2005, 10:40 AM

here is a pic of the dash I ordered...just in case anyone is interested.

87 Shortwide · 03-01-2005, 11:31 AM

I have a problem with not ever making any write ups on how I do stuff. But if you have a question, ask and I can maybe remember what I did...

bigblock73 · 03-01-2005, 01:30 PM

Crush, that is a pretty sweet deal for 800. Like I said, I have 700+ in mine...not counting the time it took me to build it. I do have a question, and maybe you can answer it for me (since you have spoken with this company). Do they offer these bezels for all the different years, or is it a one size is supposed to fit all setup? As you may already know, the H/L switches moved slightly thruought the years, some trucks have A/C...some don't...stuff like that. Just curious, I really like to looks of this and may consider one down the road for a future 73-87 project.

Crush · 03-01-2005, 02:06 PM

bigblock73...

When I spoke with him in Daytona I mentioned that there were some differences between the years. He said that he was aware but that it was too expensive to make different molds for each of the differences so he went with a "standard" style. He said that he had test fitted it into different years with no problems and that he MAY offer it with certain areas "blank" (i.e. a/c vent, windshield wipers...etc..) if demand is strong enough...

Here are the "brushed" and the plain black styles also..

bigblock73 · 03-01-2005, 02:09 PM

Awesome, thanks for the info. Get us some pics if you could once you get the assembly and get it installed.

02-27-2005, 06:29 AM	#1
MDATXXX Registered User Join Date: Dec 2004 Location: AUSTIN(ATX) Posts: 23	Autometer bezel gauges((WANTED)) I have a 82 chevy DO any one have or know anyone that has a bezel with Autometer gauges intalled in it they want to sell? I think it has to be a 81-87 bezel in order to fit mine. if any one know were I can get one please let me know, I rather buy one all ready to install cause have no time to buy gauges and do the mods, saw these pics last week and I have to it. attach a couple picture's below showing what im lookin for THX md MDATX@YAHOO.COM Attached Images

02-27-2005, 07:55 AM	#2
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	No one PRE makes them, that's Jeff's setup right there. It's really not all THAT hard to do..hardest part is wiring them up. Not really that hard though... The Guages are spensive though, I think Jeff's setup was at least $500 __________________ I have a few cars... See Them Here

02-27-2005, 12:14 PM	#3
gconn77 Registered User Join Date: Feb 2005 Posts: 39	Some one asked!! Ok... I searched the forum last night for threads about this topic... I am glad that someone else made the post and not me here... so now I can ask my question... LOL. I didn't want to make a new thread because I know that the content is here somewhere. Anyway, can you guys reply with links to other threads in the forum that have good information and write ups on this project.. Step by step of hooking up all the gauges, wiring them, etc, modifications needed (i.e. oil sending unit, etc), installing the tach... etc. This is a project that I will be doing soon. Regards, Garry

02-27-2005, 12:43 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Here is the write up on how I did mine... http://www.73-87.com/7387garage/inte...ge_surface.htm Here is Mikes write up on his... http://www.73-87.com/7387garage/inte...s_recessed.htm Here is one I found in an older issue of Four Wheeler magazine... http://www.73-87.com/7387garage/inte...ashmounted.htm I have almost $700 in mine (gauges, indicators, alum bezel, and gauge wiring harness)...but it is woth every penny if you ask me. The eaiest part of the install was the purchase and use of the Painless gauge wiring kit. It has everything you need, and good instructions, on how to install the gauges in your vehicle. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-27-2005, 12:56 PM	#5
gconn77 Registered User Join Date: Feb 2005 Posts: 39	Thank You! Thank you very much... Adding to my bookmarks. Regards, Garry

02-27-2005, 03:35 PM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	mdatxxx, I sent you a PM. My bezel isn't going anywhere...I am trying to finish my truck...not tear it apart. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-27-2005, 04:24 PM	#8
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Jeff, more pics of the model please?

02-27-2005, 05:49 PM	#9
smokinn Senior Member Join Date: Aug 2002 Location: omaha,Ne Posts: 617	Where did you get the metal from? Also how come you didnt cover the whole thing?

02-28-2005, 12:01 AM	#10
acountryclipper Registered User Join Date: Feb 2005 Location: Hernando, Fla Posts: 40	that is sweet __________________ Brian

02-28-2005, 11:30 AM	#11
Crush Active Member Join Date: Nov 2003 Location: Jacksonville, FL Posts: 307	Here is a link to Covan's Classics out of GA. He IS making a new Bezel with Gauges installed for $799. I saw him at Turkey Rod Run this year and he had one on display...it was VERY NICE!!! You can order the bezel in one of four "colors", Black, Woodgrain, Brushed Aluminum or Carbon Fiber. On the site it says that it comes with the 2 1/16 and 3 3/8 guages, but the model he had setup at TRR had the 5" and 2 5/8" gauges. Keep in mind that this is a direct fit full new bezel...not just a billet overlay ontop of the old bezel. The fit and finish was VERY nice and the piece was pretty heavy. Autometer Bezel __________________ D.M.C -FF-

02-28-2005, 12:26 PM	#12
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	My son garrett was able to make his own dash similar to Jeff's, he used a newer bezel 82 up and bought all the guages and just enlarged each hole to fit the new gauges using a dremel. He also hollowed out the back of the bezel as was shown. I don't know how much he has into it since he went with a new bezel - chrome, dash pad, gauges and wire and has the patients to do this type of work. Everything works fine now he's trying to come up with something different for the turn signal lights in the dash. Here's a pic, sorry for the quality of it. Attached Images __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

02-28-2005, 05:35 PM	#13
smokinn Senior Member Join Date: Aug 2002 Location: omaha,Ne Posts: 617	I checked out that site. No pics displayed said was coming soon.

03-01-2005, 12:44 AM	#15
Slamd99Tahoe Registered User Join Date: Nov 2004 Location: Bay Area, California Posts: 36	I'll sell you mine for $600 plus shipping it's all brand new, never wired up just sitting in the truck. It looks just like the one you showed except for my Bezel is Polished Aluminum not the Brushed. Attached Images

03-01-2005, 12:51 AM	#16
Slamd99Tahoe Registered User Join Date: Nov 2004 Location: Bay Area, California Posts: 36	Better Pic!!! Attached Images

03-01-2005, 10:40 AM	#18
Crush Active Member Join Date: Nov 2003 Location: Jacksonville, FL Posts: 307	here is a pic of the dash I ordered...just in case anyone is interested. __________________ D.M.C -FF-



Register or Log In To remove these advertisements.

03-01-2005, 11:31 AM	#19
87 Shortwide Registered User Join Date: Nov 2002 Location: Wichita Ks Posts: 536	I have a problem with not ever making any write ups on how I do stuff. But if you have a question, ask and I can maybe remember what I did... __________________ Daily Driver: 1992 Blazer dropped on rallys Project: 87 GMC shortwide, About to get a little boost

03-01-2005, 01:30 PM	#20
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Crush, that is a pretty sweet deal for 800. Like I said, I have 700+ in mine...not counting the time it took me to build it. I do have a question, and maybe you can answer it for me (since you have spoken with this company). Do they offer these bezels for all the different years, or is it a one size is supposed to fit all setup? As you may already know, the H/L switches moved slightly thruought the years, some trucks have A/C...some don't...stuff like that. Just curious, I really like to looks of this and may consider one down the road for a future 73-87 project. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

03-01-2005, 02:06 PM	#21
Crush Active Member Join Date: Nov 2003 Location: Jacksonville, FL Posts: 307	bigblock73... When I spoke with him in Daytona I mentioned that there were some differences between the years. He said that he was aware but that it was too expensive to make different molds for each of the differences so he went with a "standard" style. He said that he had test fitted it into different years with no problems and that he MAY offer it with certain areas "blank" (i.e. a/c vent, windshield wipers...etc..) if demand is strong enough... Here are the "brushed" and the plain black styles also.. __________________ D.M.C -FF-

03-01-2005, 02:09 PM	#22
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Awesome, thanks for the info. Get us some pics if you could once you get the assembly and get it installed. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.