69 panel F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lazygaurd · 03-06-2005, 12:43 AM

This panel belongs to the same guy from Marysville Wa who owns the 72 Burb project that is also listed for sale. He isn't really into the net so I said I would help him get some exposure. This panel was originally a US Navy vehicle and was in amazing condition when he got it. Was a 6 cyl 3 on the tree truck with a 410 posi. No holes cut or vents etc. Super straight body with barn doors, utility bucket seats, no drivetrain. All that is left to do is the kick panel repair and a piece of the floor where it meets the kick panel. rest is ready to sand and paint. Still has Washington title and he wants $2500.00 firm on this. Has lots of hours into dent removal prep work. I ave contact info so if you are interested I will send it to you.
Darrell..

CG · 03-06-2005, 01:30 AM

hung around till about 1 30 to meet ya darrell...maybe next time

lazygaurd · 03-06-2005, 01:34 AM

Bill said you probably passed me on the over pass we were that close. I was there right by the I-5 fueling up when you left his place. I am going to the swap meet on Sunday and will be dropping by Bills on the way home. Are you going to buy this panel from him? I said I would list it for him as well as the 72 3/4 ton Burb.

low burb · 03-06-2005, 06:33 PM

Darrell, I think Darren needs this as his company truck.

classicchev · 03-06-2005, 07:53 PM

Oh Thanks.....

low burb · 03-06-2005, 10:09 PM

Just trying to help!

03-06-2005, 12:43 AM	#1
lazygaurd Senior Member Join Date: Oct 2002 Location: Saskatoon Saskatchewan Posts: 492	69 panel F/S This panel belongs to the same guy from Marysville Wa who owns the 72 Burb project that is also listed for sale. He isn't really into the net so I said I would help him get some exposure. This panel was originally a US Navy vehicle and was in amazing condition when he got it. Was a 6 cyl 3 on the tree truck with a 410 posi. No holes cut or vents etc. Super straight body with barn doors, utility bucket seats, no drivetrain. All that is left to do is the kick panel repair and a piece of the floor where it meets the kick panel. rest is ready to sand and paint. Still has Washington title and he wants $2500.00 firm on this. Has lots of hours into dent removal prep work. I ave contact info so if you are interested I will send it to you. Darrell.. Last edited by lazygaurd; 03-06-2005 at 01:31 AM.

03-06-2005, 01:34 AM	#3
lazygaurd Senior Member Join Date: Oct 2002 Location: Saskatoon Saskatchewan Posts: 492	miised you Bill said you probably passed me on the over pass we were that close. I was there right by the I-5 fueling up when you left his place. I am going to the swap meet on Sunday and will be dropping by Bills on the way home. Are you going to buy this panel from him? I said I would list it for him as well as the 72 3/4 ton Burb.

03-06-2005, 06:33 PM	#4
low burb Registered User Join Date: Jan 2001 Location: Medicine Hat,AB, Canada Posts: 194	Darrell, I think Darren needs this as his company truck. __________________ Michael 1971 GMC Suburban "Crusty" 2000 GMC Sierra 1500 2wd 1978 Scout II 1992 Passat Syncro

03-06-2005, 10:09 PM	#6
low burb Registered User Join Date: Jan 2001 Location: Medicine Hat,AB, Canada Posts: 194	Just trying to help! __________________ Michael 1971 GMC Suburban "Crusty" 2000 GMC Sierra 1500 2wd 1978 Scout II 1992 Passat Syncro

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-06-2005, 01:30 AM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	hung around till about 1 30 to meet ya darrell...maybe next time

03-06-2005, 07:53 PM	#5
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Oh Thanks.....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.