It Lives! Well, kinda..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JBstor · 03-12-2005, 12:10 AM

After yesterday's trouble with the HEI, I got out today and got another one. Stuck it in, wired it all up, eyeballed the timing, primed the carb, got in, turned the key, and........Vroooooommm!!!!!

Only problem now is the carb. It was a good one before, but not now. Gas coming out every crevice, inside and out. Shut down.

OH well, it was a glorius five seconds or so, first time the thing has had a running engine in twelve years.

Tomorrow, I dig out a Q jet and start rebuilding

Delays, delays......
JB

71jimmy · 03-12-2005, 01:03 AM

I know the feeling, one step forward two steps backward. But it's worth it in the end when everthing is right.

**FRENCHBLUE72** · 03-12-2005, 05:05 PM

Hearung it fire for the first time is always a great feeling..

JBstor · 03-12-2005, 07:50 PM

OK,

Q jet installed, and it runs nice!

Lots of adjustments to make, but it runs!

Now I gotta get to work on the doors, and finish welding a couple small spots on the tub, and get to work cleaning more parts. I figure about two weeks of mucking around, and I can start paint prep.

I am really undecided about the interior though. I have all original seats in the shed, but the fronts badly need recovering. I could do that myself, but I of course would have to buy the covers, and then what to do for seat belts?

I did have in mind some newer buckets, and was also looking at the 02 seats with the built in belts. The decision will affect all the rest of the interior, carpeting or rubber flooring, If I go with the originals I will go black, but newer seats, I will look for a nice tan.

The Blazer will be painted the original color, light red.

Too much thinking to do, I just want to drive it to 7-11, is that too much to ask?

JB

Trifelynn · 03-14-2005, 09:30 AM

They have 7-11 in Canada? I thought it might be 6-10 or something...hehe Just kidding...

It sounds like it is really coming along. Every little thing, gets more and more exciting...keep us posted...

maybe a pic to feed the hungry wolves...like myself..

*Gee_Emm* · 03-14-2005, 10:21 AM

Quote:

Originally Posted by Trifelynn

They have 7-11 in Canada? I thought it might be 6-10 or something...hehe Just kidding...

It sounds like it is really coming along. Every little thing, gets more and more exciting...keep us posted...

maybe a pic to feed the hungry wolves...like myself..

Winnipeg is the Slurpee capital of the world for a few years running.

"Who? What? Where? Who’s buying the most 7-Eleven stuff? The answer is – the most Slurpee® beverages in the world are purchased in Winnipeg, Manitoba, Canada; and for the United States, it’s Detroit; hot dogs in Washington, D.C., coffee on Long Island, nachos in Colorado, Big Gulp® drinks in Las Vegas and Utah."

Trifelynn · 03-14-2005, 03:40 PM

LOL

Gee Emm I thought you were just the most knowledgable person when it came to metal working, and fabrication....but I was wrong, you also know the most about what quickie marts people frequent the most

03-12-2005, 12:10 AM	#1
JBstor Registered User Join Date: Feb 2005 Location: Winnipeg, Manitoba, Canada Posts: 66	It Lives! Well, kinda..... After yesterday's trouble with the HEI, I got out today and got another one. Stuck it in, wired it all up, eyeballed the timing, primed the carb, got in, turned the key, and........Vroooooommm!!!!! Only problem now is the carb. It was a good one before, but not now. Gas coming out every crevice, inside and out. Shut down. OH well, it was a glorius five seconds or so, first time the thing has had a running engine in twelve years. Tomorrow, I dig out a Q jet and start rebuilding Delays, delays...... JB

03-12-2005, 01:03 AM	#2
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	I know the feeling, one step forward two steps backward. But it's worth it in the end when everthing is right. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

03-12-2005, 05:05 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Hearung it fire for the first time is always a great feeling.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-14-2005, 09:30 AM	#5
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	They have 7-11 in Canada? I thought it might be 6-10 or something...hehe Just kidding... It sounds like it is really coming along. Every little thing, gets more and more exciting...keep us posted... maybe a pic to feed the hungry wolves...like myself.. __________________ Always looking for a 2wd blazer

03-14-2005, 03:40 PM	#7
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	LOL Gee Emm I thought you were just the most knowledgable person when it came to metal working, and fabrication....but I was wrong, you also know the most about what quickie marts people frequent the most __________________ Always looking for a 2wd blazer

03-12-2005, 07:50 PM	#4
JBstor Registered User Join Date: Feb 2005 Location: Winnipeg, Manitoba, Canada Posts: 66	OK, Q jet installed, and it runs nice! Lots of adjustments to make, but it runs! Now I gotta get to work on the doors, and finish welding a couple small spots on the tub, and get to work cleaning more parts. I figure about two weeks of mucking around, and I can start paint prep. I am really undecided about the interior though. I have all original seats in the shed, but the fronts badly need recovering. I could do that myself, but I of course would have to buy the covers, and then what to do for seat belts? I did have in mind some newer buckets, and was also looking at the 02 seats with the built in belts. The decision will affect all the rest of the interior, carpeting or rubber flooring, If I go with the originals I will go black, but newer seats, I will look for a nice tan. The Blazer will be painted the original color, light red. Too much thinking to do, I just want to drive it to 7-11, is that too much to ask? JB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.