Wanting to trade drop spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10chevy69 · 03-13-2005, 08:46 PM

I have discovered that the spindles on my donor truck are drops. I am staying with the stock height so I need some good stock ones to trade for. I might also have shorter springs in the back that can go with them. I don't have them off yet so I can't tell for sure. I will pay for shipping to you if you will pay for shipping to me.

lamar · 03-13-2005, 08:48 PM

Hey let me know what drop they are and I'll trade.

BigBlockBurris · 03-13-2005, 08:49 PM

I have a set of stock spindles I will trade. And I will pay the shipping as you suggest. Let me know. Thanks

BBB

I am in NC 28083

6(sic)6 · 03-13-2005, 08:54 PM

WHAT A DEAL! someone is gonna make OUT GREAT!!!!!!!!!

70chevc10 · 03-13-2005, 09:20 PM

damn! if i wasnt out mowing the lawn i could have caught this deal sooner! ive just been waiting for the time to post my parts for sale, including stock spindles that i wanted to trade for drop! the ones i have were sandblasted so they look pretty good, have been sitting for a yearor two though. also have calipers, tie rods and such. keep me in line i want to get rid of my spindles!

wnc mountain · 03-13-2005, 09:28 PM

put me next in line for sure!!!

c10chevy69 · 03-13-2005, 10:40 PM

Wow!! Thanks for all of the responses guys. I didn't think I would hear from anyone at all much less this fast. I am looking at my ECE catalog and they look the same as the 2.5" drops in there. Anybody have any pictures of their stock ones?

70chevc10 · 03-13-2005, 11:43 PM

Quote:

Originally Posted by c10chevy69

Anybody have any pictures of their stock ones?

here ya go

wannabeburbowner · 03-13-2005, 11:54 PM

Doubt if it will get to me...but I have some stock ones to trade also. Still on truck, I will take them off sandblast them and paint them for you too!!!

later,

Travis

69ShortStep · 03-14-2005, 12:00 AM

I have a nice set of 72 stock spindles from North Carolina and I will be traveling through Oklahoma City on my way to Lawton, OK. I will be there from 3/26 to 4/3.

Let me know if the other deals fall through and you want to meet to avoid shipping.

muddyole 69 · 03-14-2005, 01:44 AM

Wow 2 minutes and a deal is made now that is what this board is all about

70chevc10 · 03-17-2005, 05:53 PM

just out of curiosity who got them?

SCOTI · 03-18-2005, 02:53 PM

If no deals yet, I'm in Dallas & have @ least 1 xtra pair of stock 73-87 style, 1.25" thick rotor spindles & would trade. Put my name in the hat.

03-13-2005, 08:46 PM	#1
c10chevy69 Registered User Join Date: May 2004 Location: Oklahoma City Posts: 205	Wanting to trade drop spindles I have discovered that the spindles on my donor truck are drops. I am staying with the stock height so I need some good stock ones to trade for. I might also have shorter springs in the back that can go with them. I don't have them off yet so I can't tell for sure. I will pay for shipping to you if you will pay for shipping to me. Attached Images __________________ 1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug

03-13-2005, 08:48 PM	#2
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	Hey let me know what drop they are and I'll trade. __________________ 72 C-10

03-13-2005, 08:49 PM	#3
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Spindles I have a set of stock spindles I will trade. And I will pay the shipping as you suggest. Let me know. Thanks BBB I am in NC 28083

03-13-2005, 08:54 PM	#4
6(sic)6 Registered User Join Date: Nov 2004 Location: Texas Posts: 199	WHAT A DEAL! someone is gonna make OUT GREAT!!!!!!!!! __________________ Daily Driver: 383 sbc Shaved. lowerd

03-13-2005, 09:20 PM	#5
70chevc10 Registered User Join Date: Jun 2004 Location: Puyallup, WA Posts: 535	damn! if i wasnt out mowing the lawn i could have caught this deal sooner! ive just been waiting for the time to post my parts for sale, including stock spindles that i wanted to trade for drop! the ones i have were sandblasted so they look pretty good, have been sitting for a yearor two though. also have calipers, tie rods and such. keep me in line i want to get rid of my spindles! Last edited by 70chevc10; 03-13-2005 at 09:55 PM.

03-13-2005, 09:28 PM	#6
wnc mountain More hobbies than money! Join Date: Jan 2002 Location: Raleigh, nc, usa Posts: 655	put me next in line for sure!!! __________________ '70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project

03-13-2005, 10:40 PM	#7
c10chevy69 Registered User Join Date: May 2004 Location: Oklahoma City Posts: 205	Wow!! Thanks for all of the responses guys. I didn't think I would hear from anyone at all much less this fast. I am looking at my ECE catalog and they look the same as the 2.5" drops in there. Anybody have any pictures of their stock ones? __________________ 1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug

03-13-2005, 11:54 PM	#9
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	Doubt if it will get to me...but I have some stock ones to trade also. Still on truck, I will take them off sandblast them and paint them for you too!!! later, Travis

03-14-2005, 12:00 AM	#10
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	I have a nice set of 72 stock spindles from North Carolina and I will be traveling through Oklahoma City on my way to Lawton, OK. I will be there from 3/26 to 4/3. Let me know if the other deals fall through and you want to meet to avoid shipping. Last edited by 69ShortStep; 03-14-2005 at 12:07 AM.

03-14-2005, 01:44 AM	#11
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	spindles Wow 2 minutes and a deal is made now that is what this board is all about __________________ hav'n fun be'n me

03-17-2005, 05:53 PM	#12
70chevc10 Registered User Join Date: Jun 2004 Location: Puyallup, WA Posts: 535	just out of curiosity who got them?

03-18-2005, 02:53 PM	#13
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	If no deals yet, I'm in Dallas & have @ least 1 xtra pair of stock 73-87 style, 1.25" thick rotor spindles & would trade. Put my name in the hat. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.