WTB: First Gen Blazer/Jimmy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shelby987 · 03-15-2005, 09:00 AM

I am new to the group, but I have been searching for a 69/72 blazer or jimmy for a couple of years now. I would prefer a vehicle that has a SM465 (or upgraded manual trans), but will be willing to look at some automatics. To specify, color of int/ext is not all that important, I think the body lines speak for themselves, but I do want a 4x4. I am located in Ann Arbor Michigan, but I am willing to travel for the right vehicle. I am not looking for a project or a show queen, just something that can be used as a regular driver with little rust. I have seen a couple of blazers on here for sale already, but I realize some of the posts are old, so rather than bother everyone who posted an ad three months ago, I felt it might be easier to just post my own want ad, my budget is kind of up in the air right now as I am waiting for my tax refund, but for the right blazer I should be willing to work something out.
Thanks everyone,
-Lee

LUV2XCLR8 · 03-15-2005, 04:56 PM

TO THE BOARD FROM WEST 10-UH-C

*72CSTC5* · 03-15-2005, 06:22 PM

Welcome

moodyholler · 03-15-2005, 09:01 PM

72 CST loaded for sale Texas truck, tilt a/c, posi, rollbar, spare tire carrier. 11k invested f/s 8000.00 emaial for pictures 350/350/NP205 driveline

olblue60@aol.com · 03-15-2005, 11:34 PM

Welcome from Maryland

vtblazer · 03-17-2005, 07:54 AM

Quote:

Originally Posted by shelby987

I am waiting for my tax refund

WOW! Must be a whopper if it buys you a blazer.

Good luck with your search

to the board.

I spent a summer in Ann Arbor when I was 16, nice place, cool dunes.

shelby987 · 03-17-2005, 08:56 AM

actually, I used to live in Essex Junction, just outside of burlington for the better part of my life....moved out here a couple of years ago to start school and work.

With respect to the tax return, no it won't buy a blazer, but it will help a little.

No one has seen a manual trans jimmy or blazer on the side or the road for sale recently?? (willing to travel).
Thanks
-Lee

shelby987 · 03-20-2005, 05:35 PM

Just to check, and get back up to the top, does anyone know of, or have a 69-72 blazer or jimmy that they know of for sale?
Thanks
-Lee

A few 72's · 03-22-2005, 04:46 PM

I seen this one in north Alabama over the weekend. Some rust in the rear floor area and floor board. Outer rockers had been replaced but they did it on top of the org from what I could see. Main support rockers only had one spot about the size of a dime. Window had $3700 or 3800, but sheet had $4000??? I've got the number if you want it... but I did not talk to the owner.

*dtlilly* · 03-23-2005, 12:32 AM

Shelby987, welcome to the board!

Afew72's, that looks like a nice Blazer! I wonder if the original AM/FM is kept by the owner. Did it have the rear side panels?

A few 72's · 03-24-2005, 11:37 AM

dtlilly
I don't think it had the side panels.

I'll look at the pictures and get the number for the ones that sent the PM's.

shelby987 · 04-10-2005, 04:47 PM

Just wanted to reintroduce this thread to the board, the blazers I was looking at fell through, one was sold before i could get to look at it, the other had WAY too much rust for the price, and the third was out of my current price range for as far away as it was....so if anyone out there finds a good deal, please keep me in mind. (Located in Ann Arbor michigan, but willing to travel).
-Lee

03-15-2005, 09:00 AM	#1
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	WTB: First Gen Blazer/Jimmy I am new to the group, but I have been searching for a 69/72 blazer or jimmy for a couple of years now. I would prefer a vehicle that has a SM465 (or upgraded manual trans), but will be willing to look at some automatics. To specify, color of int/ext is not all that important, I think the body lines speak for themselves, but I do want a 4x4. I am located in Ann Arbor Michigan, but I am willing to travel for the right vehicle. I am not looking for a project or a show queen, just something that can be used as a regular driver with little rust. I have seen a couple of blazers on here for sale already, but I realize some of the posts are old, so rather than bother everyone who posted an ad three months ago, I felt it might be easier to just post my own want ad, my budget is kind of up in the air right now as I am waiting for my tax refund, but for the right blazer I should be willing to work something out. Thanks everyone, -Lee

03-15-2005, 04:56 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	TO THE BOARD FROM WEST 10-UH-C __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-15-2005, 09:01 PM	#4
moodyholler Registered User Join Date: Dec 2003 Location: Roanoke,Virginia Posts: 179	72 CST loaded for sale Texas truck, tilt a/c, posi, rollbar, spare tire carrier. 11k invested f/s 8000.00 emaial for pictures 350/350/NP205 driveline Attached Images __________________ 1998 WRANGLER I-6 auto 1972 LWB FLEETSIDE 1968 GMC SWB STEPSIDE 1994 C-1500 SWB 4.3 5 SPD

03-15-2005, 11:34 PM	#5
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Welcome from Maryland __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

03-22-2005, 04:46 PM	#9
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	I seen this one in north Alabama over the weekend. Some rust in the rear floor area and floor board. Outer rockers had been replaced but they did it on top of the org from what I could see. Main support rockers only had one spot about the size of a dime. Window had $3700 or 3800, but sheet had $4000??? I've got the number if you want it... but I did not talk to the owner. Attached Images __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

03-15-2005, 06:22 PM	#3
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Welcome

03-17-2005, 08:56 AM	#7
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	actually, I used to live in Essex Junction, just outside of burlington for the better part of my life....moved out here a couple of years ago to start school and work. With respect to the tax return, no it won't buy a blazer, but it will help a little. No one has seen a manual trans jimmy or blazer on the side or the road for sale recently?? (willing to travel). Thanks -Lee

03-20-2005, 05:35 PM	#8
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Just to check, and get back up to the top, does anyone know of, or have a 69-72 blazer or jimmy that they know of for sale? Thanks -Lee

03-23-2005, 12:32 AM	#10
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Shelby987, welcome to the board! Afew72's, that looks like a nice Blazer! I wonder if the original AM/FM is kept by the owner. Did it have the rear side panels?

03-24-2005, 11:37 AM	#11
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	dtlilly I don't think it had the side panels. I'll look at the pictures and get the number for the ones that sent the PM's. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

04-10-2005, 04:47 PM	#12
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Just wanted to reintroduce this thread to the board, the blazers I was looking at fell through, one was sold before i could get to look at it, the other had WAY too much rust for the price, and the third was out of my current price range for as far away as it was....so if anyone out there finds a good deal, please keep me in mind. (Located in Ann Arbor michigan, but willing to travel). -Lee

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.