Truck doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MARIOS68PANEL · 03-19-2005, 11:52 PM

Can anyone tell me if 68 truck doors will go on my 68 panel. Or are they different. Thanks all

LUV2XCLR8 · 03-19-2005, 11:57 PM

As Far As I Know They Are The Same, Did You Try Looking At
One Of The Vendor Websites, Should Be Listed The Same, All
Except The Blazers, Which Are Cut Down P/u Doors Also.

LUV2XCLR8 · 03-20-2005, 12:00 AM

Oooops, I Stand Corrected, They Are Different, Sorry Buddy

PANEL http://www.gmcpauls.com/pictures/67-...nel%20Door.jpg

P/U http://www.gmcpauls.com/pictures/67-72door.jpg

BLAZER http://www.gmcpauls.com/pictures/69-...0Door%20LH.jpg

I'M STILL

pritch · 03-20-2005, 12:03 AM

Yeah-you will need to find doors from a Suburban or Panel. These have a square corner at the top back, trucks are rounded.

LUV2XCLR8 · 03-20-2005, 12:06 AM

Quote:

Originally Posted by pritch

Yeah-you will need to find doors from a Suburban or Panel. These have a square corner at the top back, trucks are rounded.

OR BUY NEW ONES

MARIOS68PANEL · 03-20-2005, 12:22 PM

Thanks , Yoour right , They are different.

**FRENCHBLUE72** · 03-20-2005, 03:42 PM

Mario if your upper doors on the pannel are good(ie the square window track ) you can easily graft them onto regular truck door's... Hope this helps ya out..

03-19-2005, 11:52 PM	#1
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Truck doors Can anyone tell me if 68 truck doors will go on my 68 panel. Or are they different. Thanks all __________________ 67 short step 71 Custom

03-19-2005, 11:57 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,477	As Far As I Know They Are The Same, Did You Try Looking At One Of The Vendor Websites, Should Be Listed The Same, All Except The Blazers, Which Are Cut Down P/u Doors Also. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-20-2005, 12:00 AM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,477	Oooops, I Stand Corrected, They Are Different, Sorry Buddy PANEL http://www.gmcpauls.com/pictures/67-...nel%20Door.jpg P/U http://www.gmcpauls.com/pictures/67-72door.jpg BLAZER http://www.gmcpauls.com/pictures/69-...0Door%20LH.jpg I'M STILL __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 03-20-2005 at 12:05 AM.

03-20-2005, 12:03 AM	#4
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Yeah-you will need to find doors from a Suburban or Panel. These have a square corner at the top back, trucks are rounded. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

03-20-2005, 12:22 PM	#6
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Thanks , Yoour right , They are different. __________________ 67 short step 71 Custom

03-20-2005, 03:42 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Mario if your upper doors on the pannel are good(ie the square window track ) you can easily graft them onto regular truck door's... Hope this helps ya out.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.