WTB Need Pigtail: - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 03-25-2005, 12:55 AM

I need this but with longer leads...which probably means it will have to be cut back into the harness.
Its the female side of the "horseshoe" plug for the column

anyone got a junk harness (i'll buy the whole thing or just this part)

I need it with @ least 12" of wire...if not more...preferably more.

Like i said i'll buy a whole harness if i have to and cut it up.
or does anyone know how i can get those leads out and get longer ones in? do they make new clips to slid in for each individual wire?

Thanks,
it's for my hot rod but i don't want to splice wires together to get them to the fuse block.

**kwmech** · 03-25-2005, 01:38 AM

I just tossed a column in the junk trailer out of my 69 GMC. Still available if I go out there with a pair of dykes.

longhorn71 · 03-25-2005, 02:20 AM

I have one that i could cut out with as much wire as needed.The harnass in bad shape,Just let me know if you want it.

**GSFMECH** · 03-25-2005, 05:39 AM

Go in from the plug side and there is a small tang you can unlatch with a tiny screwdriver. You can then remove the wire from the plug without cutting it. Don't know if that helps you or not.

69 Short Fleet · 03-25-2005, 06:08 AM

Any pics of the rod?

arkracing · 03-25-2005, 07:42 AM

Longhorn - Yes interested also interested in the small block throttle rod: PM sent

GFS - i would do that but i would need new metal clips to attach the the new longer wires so that i could put them back in the plug

here is an old picture of the Rod and a pic of the motor....can't find the ones with the bed on it right now..i'm kinda in a rush this morning

mrein3 · 03-25-2005, 10:56 AM

Quote:

Originally Posted by arkracing

GFS - i would do that but i would need new metal clips to attach the the new longer wires so that i could put them back in the plug

NAPA sells the metal wire ends that slip into the plastic connector.

I have the part number in my desk at work but I'm off today. I you still don't have this resolved by Monday send me a PM and I'll get you the NAPA part number.

longhorn71 · 03-25-2005, 08:24 PM

got the plug cut out of the harnass with about 17"of wire on it

roj2323 · 03-25-2005, 08:29 PM

i have the gm part number somewhere. i bought 16 last week for a 68 camaro "same ones" . they were .74 cents a peice.
i'll get back to you.
ondrew

edit:
i allmost forgot. the old wires come out of the plug from the front and the new ones slide in from the back. a little flat head screwdriver will make this alot easier.

03-25-2005, 12:55 AM	#1
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	WTB Need Pigtail: I need this but with longer leads...which probably means it will have to be cut back into the harness. Its the female side of the "horseshoe" plug for the column anyone got a junk harness (i'll buy the whole thing or just this part) I need it with @ least 12" of wire...if not more...preferably more. Like i said i'll buy a whole harness if i have to and cut it up. or does anyone know how i can get those leads out and get longer ones in? do they make new clips to slid in for each individual wire? Thanks, it's for my hot rod but i don't want to splice wires together to get them to the fuse block. __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

03-25-2005, 05:39 AM	#4
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Go in from the plug side and there is a small tang you can unlatch with a tiny screwdriver. You can then remove the wire from the plug without cutting it. Don't know if that helps you or not. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

03-25-2005, 07:42 AM	#6
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Longhorn - Yes interested also interested in the small block throttle rod: PM sent GFS - i would do that but i would need new metal clips to attach the the new longer wires so that i could put them back in the plug here is an old picture of the Rod and a pic of the motor....can't find the ones with the bed on it right now..i'm kinda in a rush this morning __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

03-25-2005, 08:29 PM	#9
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	i have the gm part number somewhere. i bought 16 last week for a 68 camaro "same ones" . they were .74 cents a peice. i'll get back to you. ondrew edit: i allmost forgot. the old wires come out of the plug from the front and the new ones slide in from the back. a little flat head screwdriver will make this alot easier. Last edited by roj2323; 03-25-2005 at 08:31 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-25-2005, 01:38 AM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,630	I just tossed a column in the junk trailer out of my 69 GMC. Still available if I go out there with a pair of dykes.

03-25-2005, 02:20 AM	#3
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	I have one that i could cut out with as much wire as needed.The harnass in bad shape,Just let me know if you want it.

03-25-2005, 06:08 AM	#5
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Any pics of the rod?

03-25-2005, 08:24 PM	#8
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	got the plug cut out of the harnass with about 17"of wire on it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.