WTB:Inner barn door handle-B.D.Glass f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MARIOS68PANEL · 03-27-2005, 04:11 PM

I need To buy the 68 panel Inner handle assymbly for my barn doors.
I will trade for barn door glass if someone needs it.

saxmo · 03-28-2005, 01:29 PM

I have a couple of barn doors from a 69 panel. They are beat up looking on the outside, but the latches and all work great.

MARIOS68PANEL · 03-28-2005, 09:17 PM

Let me know how much you want for the inside handel assymbly shipped to 95695 And I will pay with paypal. I just got new doors so I dont need the whole doors

saxmo · 03-28-2005, 09:23 PM

I'll take it out and figure shipping.

saxmo · 03-28-2005, 09:26 PM

I would be willing to work a trade if you have any patch panels I could use. I need the rocker that is from the door to the rear wheel on driver side. I also need the driver rear corner (taillight area). Let me know.

MARIOS68PANEL · 04-02-2005, 11:18 PM

ttt

03-27-2005, 04:11 PM	#1
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	WTB:Inner barn door handle-Barn Door Glass f/s I need To buy the 68 panel Inner handle assymbly for my barn doors. I will trade for barn door glass if someone needs it. __________________ 67 short step 71 Custom Last edited by MARIOS68PANEL; 03-27-2005 at 04:34 PM.

03-28-2005, 01:29 PM	#2
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	I have a couple of barn doors from a 69 panel. They are beat up looking on the outside, but the latches and all work great. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

03-28-2005, 09:17 PM	#3
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Let me know how much you want for the inside handel assymbly shipped to 95695 And I will pay with paypal. I just got new doors so I dont need the whole doors __________________ 67 short step 71 Custom

03-28-2005, 09:23 PM	#4
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	I'll take it out and figure shipping. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

03-28-2005, 09:26 PM	#5
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	I would be willing to work a trade if you have any patch panels I could use. I need the rocker that is from the door to the rear wheel on driver side. I also need the driver rear corner (taillight area). Let me know. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

04-02-2005, 11:18 PM	#6
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	ttt __________________ 67 short step 71 Custom

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.