|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-28-2005, 11:28 AM
|
#1 |
|
Registered User
Join Date: Jul 2001
Location: reno, nv
Posts: 646
|
Inside Sterring column ???'s
what is in the inside of an automatic steering column besides the steering shaft, wiring harness and shifting hardware? i want to mount a tach to the column, but i dont want to use a hose clamp. i was thinking of drilling and tapping thread into the column body and mounting it that way. has anyone tried this before? will i have enough clearance to drill and tap with out damaging the internals of the column? any other feedback is welcome. thanks. i just want a cleaner install without the hose clamp, am i
__________________
70 LWB, 350/350 A/C, P/S, 3 Tone Paint (white cap, primer gray with black guide coat) |
|
|
|
03-28-2005, 01:49 PM
|
#2 |
|
Registered User
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
|
Just take out one of the screws that hold the netural safety switch and check it for lenght. Nothing you can hurt by drilling there. (use sheet metal screws like the switch--no tapping this way)
__________________
56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer |
|
|
|
|
03-28-2005, 03:19 PM
|
#3 |
|
Registered User
Join Date: Jul 2001
Location: reno, nv
Posts: 646
|
ok, i will take a look at it, hopefully it will be as easy as i anticipate. should also be a cleaner looking installation. thanks
 if it works i will have pics.
__________________
70 LWB, 350/350 A/C, P/S, 3 Tone Paint (white cap, primer gray with black guide coat) |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
