72 swb & parts FS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HuggerCST · 03-29-2005, 02:06 PM

My plans have changed on this project truck, so it's back up for sale along with a few parts. I'll be adding more here, and will have a LOAD of stuff for sale next month at Pate swap meet in Ft. Worth, so I should be able to deliver the smaller stuff to Ft. Worth, and maybe even OK city. Shipping will be from 71270. Paypal is awriser@yahoo.com. Please respond here to avoid confusion.
72 swb- EDIT- SALE PENDING $250 with title. Most of the body is shot, but it does have a pretty good left bedside, descent right bedside, useable gate, rear airbags, and of coarse, a good disc brake frame.
Aux. battery box- $75 plus shipping. Nice, blasted & coated with POR15
B&M Starshifter- $75 plus shipping with all hardware. Brackets added to fit low hump floor '67-72.
Sandalwood '70 door panels- $35 for the set plus shipping. The one pictured is in the worst shape. One screw hole has some rust around it, and the bottom edges need to be reglued.
82 firebird V-8 tach dash-$15 plus shipping
Smooth stepside tailgate skin- SALE PENDING- (new) $35 plus shipping
Green interior stuff- $30 plus shipping
Custom door emblems- $10 plus shipping
Custom gray tweed interior- $200 plus shipping. (door panels, dash, visors, and headliner) Headliner is sagging some, but the material is in good shape, so I'm sure it could be repaired.
Lowered A-arms- $200 plus shipping. I was told these were bought for a '77, but I see no reason that it wouldn't fit 67-72. These are new, never installed.
31x15.50x15 MT tires on 15x12 6 hole rallys with rings & caps- $100 no shipping
More to come.

HuggerCST · 03-29-2005, 02:33 PM

more pics

**'70_402** · 03-29-2005, 03:10 PM

How Much For Shipping On The Door Panels... 79065... I Might Be @ Pate... So Let Me Know I Would Like To Have Them...

HuggerCST · 03-29-2005, 04:32 PM

70'-402- Looks like shipping will be about ten bucks.
More pics-

**'70_402** · 03-29-2005, 04:41 PM

what are those control arms.... are those cutom made or did you buy them somewhere.... how much...more info in general... looks like you got some great stuff there...

HuggerCST · 03-29-2005, 04:47 PM

70'-402- I updated the original post. I was told they were bought for a '77, but I think they will fit 67-72. They are nice. I'm not sure of the amount of drop, but I am guessing 3 or 4 inches. Thanks, this is just part of it, lol.

HuggerCST · 03-29-2005, 05:10 PM

One more

**'70_402** · 03-29-2005, 05:19 PM

will you be willing to put the door panels back for me untill pate..? and then i can come and get them... if so i will take them....

HuggerCST · 03-29-2005, 05:32 PM

PM sent.

RicksTrucks · 03-29-2005, 06:42 PM

Do you know what kind of ratio is the rear?

55454 · 03-29-2005, 11:18 PM

I PM'd on the frame please reply. The $250 deal.

castillo430 · 03-29-2005, 11:41 PM

Does the bed have a wood/metal floor. How much for just the bed. castillo430@yahoo.com

HuggerCST · 03-30-2005, 12:34 AM

Rick- Not sure on the ratio.
55454- PM returned.
Castillo430- It has a metal floor, but is rusty. I would rather sell the whole truck, but if I can't, I'll let you know. Thanks

RED67 · 03-30-2005, 09:41 AM

how much for the upper and lower control arms??? I'M INTERESTED

HuggerCST · 03-30-2005, 10:34 AM

Quote:

Originally Posted by RED67

how much for the upper and lower control arms??? I'M INTERESTED

No uppers listed, though I have some if you need them. $200 for the dropped lowers. Thanks

Swbman · 03-30-2005, 11:39 AM

Wynne, How's the rubber on the tires,is are there is cracking looks like would go good on the 4x4 I got from you. Mike

RicksTrucks · 03-30-2005, 12:10 PM

Will call you and talk some more about the 72 swb

Smokie55 · 03-30-2005, 12:28 PM

I am intersted in the tail gate skin. I will pm you about details.

Thanks, Will

RicksTrucks · 03-30-2005, 12:34 PM

Read your PM back to me and I will take the truck. Call you tonite to work out the details. Thanks.

HuggerCST · 03-30-2005, 01:20 PM

Quote:

Originally Posted by Swbman

Wynne, How's the rubber on the tires,is are there is cracking looks like would go good on the 4x4 I got from you. Mike

????

LOL Mike, just pickin' at ya. Yes, the tires(the ones on the 15x12 rallys) are cracked some, but the cracking doesn't look deep, and the tires have never been used.
Sounds good Rick.
Smokie- PM returned.

70short/step · 03-30-2005, 02:05 PM

Do you still have tailgate skin? If so shipping to 95204 please.

HuggerCST · 03-30-2005, 02:55 PM

Sales pending on the sandalwood door panels, tailgate skin, and the truck. Thanks!

Swbman · 04-01-2005, 09:53 AM

Wynne, put me down for the rims and tires.If Rick gets a swb frame from you then I will pick it up from your place.Mike

kballan · 04-01-2005, 02:44 PM

PM sent on the custom door emblems.

humbulay · 04-18-2005, 05:26 AM

whats the floor of the 72 swb bed loook like? any pics?

03-29-2005, 02:06 PM	#1
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	72 swb & parts FS My plans have changed on this project truck, so it's back up for sale along with a few parts. I'll be adding more here, and will have a LOAD of stuff for sale next month at Pate swap meet in Ft. Worth, so I should be able to deliver the smaller stuff to Ft. Worth, and maybe even OK city. Shipping will be from 71270. Paypal is awriser@yahoo.com. Please respond here to avoid confusion. 72 swb- EDIT- SALE PENDING $250 with title. Most of the body is shot, but it does have a pretty good left bedside, descent right bedside, useable gate, rear airbags, and of coarse, a good disc brake frame. Aux. battery box- $75 plus shipping. Nice, blasted & coated with POR15 B&M Starshifter- $75 plus shipping with all hardware. Brackets added to fit low hump floor '67-72. Sandalwood '70 door panels- $35 for the set plus shipping. The one pictured is in the worst shape. One screw hole has some rust around it, and the bottom edges need to be reglued. 82 firebird V-8 tach dash-$15 plus shipping Smooth stepside tailgate skin- SALE PENDING- (new) $35 plus shipping Green interior stuff- $30 plus shipping Custom door emblems- $10 plus shipping Custom gray tweed interior- $200 plus shipping. (door panels, dash, visors, and headliner) Headliner is sagging some, but the material is in good shape, so I'm sure it could be repaired. Lowered A-arms- $200 plus shipping. I was told these were bought for a '77, but I see no reason that it wouldn't fit 67-72. These are new, never installed. 31x15.50x15 MT tires on 15x12 6 hole rallys with rings & caps- $100 no shipping More to come. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 04-18-2005 at 09:24 AM.

03-29-2005, 02:33 PM	#2
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	more pics Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-29-2005, 03:10 PM	#3
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	How Much For Shipping On The Door Panels... 79065... I Might Be @ Pate... So Let Me Know I Would Like To Have Them... __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

03-29-2005, 04:32 PM	#4
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	70'-402- Looks like shipping will be about ten bucks. More pics- Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-29-2005, 04:41 PM	#5
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	what are those control arms.... are those cutom made or did you buy them somewhere.... how much...more info in general... looks like you got some great stuff there... __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

03-29-2005, 04:47 PM	#6
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	70'-402- I updated the original post. I was told they were bought for a '77, but I think they will fit 67-72. They are nice. I'm not sure of the amount of drop, but I am guessing 3 or 4 inches. Thanks, this is just part of it, lol. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-29-2005, 05:10 PM	#7
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	One more Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-29-2005, 05:19 PM	#8
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	will you be willing to put the door panels back for me untill pate..? and then i can come and get them... if so i will take them.... __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

03-29-2005, 05:32 PM	#9
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	PM sent. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-29-2005, 06:42 PM	#10
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Do you know what kind of ratio is the rear? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-29-2005, 11:18 PM	#11
55454 55454 Join Date: Mar 2005 Location: Lafayette La. Posts: 340	I PM'd on the frame please reply. The $250 deal. Last edited by 55454; 03-30-2005 at 12:07 AM.

03-29-2005, 11:41 PM	#12
castillo430 Registered User Join Date: Sep 2004 Location: seguin,tx Posts: 38	Does the bed have a wood/metal floor. How much for just the bed. castillo430@yahoo.com

03-30-2005, 12:34 AM	#13
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Rick- Not sure on the ratio. 55454- PM returned. Castillo430- It has a metal floor, but is rusty. I would rather sell the whole truck, but if I can't, I'll let you know. Thanks __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-30-2005, 09:41 AM	#14
RED67 Forever Grateful Join Date: Mar 2001 Location: Forney,Texas Posts: 779	how much for the upper and lower control arms??? I'M INTERESTED __________________ R.I.P Dad 04-07-42 - 05-27-09

03-30-2005, 11:39 AM	#16
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	Wynne, How's the rubber on the tires,is are there is cracking looks like would go good on the 4x4 I got from you. Mike __________________ 1961 BUICK LESABRE 1968 CHEVELLE SS 396 1969 BUICK RIVIERA GS 1971 2 WHEEL DRIVE BLAZER 1971 4X4 BLAZER 1971 SHORTBED CHEYENNE FLEETSIDE 1971 SHORTBED 4X4 FLEETSIDE ** ...My Ebay



Register or Log In To remove these advertisements.

03-30-2005, 12:10 PM	#17
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Will call you and talk some more about the 72 swb __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-30-2005, 12:28 PM	#18
Smokie55 Registered User Join Date: Oct 2002 Location: Wylie, TX Posts: 141	I am intersted in the tail gate skin. I will pm you about details. Thanks, Will __________________ -- Will Evans -- 1955 Short Step "Sweet Pea" - Family heirloom. 1969 Suburban "Otis" - 396/TH400 - Dallas Ambulance - 1972 K5 blazer "Rusty" - 400/TH350/NP205 - Yeah it's big alright!! - Founding Member of Southern Bowties Club -

03-30-2005, 12:34 PM	#19
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Read your PM back to me and I will take the truck. Call you tonite to work out the details. Thanks. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-30-2005, 02:05 PM	#21
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Do you still have tailgate skin? If so shipping to 95204 please. __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

03-30-2005, 02:55 PM	#22
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Sales pending on the sandalwood door panels, tailgate skin, and the truck. Thanks! __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-01-2005, 09:53 AM	#23
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	Wynne, put me down for the rims and tires.If Rick gets a swb frame from you then I will pick it up from your place.Mike __________________ 1961 BUICK LESABRE 1968 CHEVELLE SS 396 1969 BUICK RIVIERA GS 1971 2 WHEEL DRIVE BLAZER 1971 4X4 BLAZER 1971 SHORTBED CHEYENNE FLEETSIDE 1971 SHORTBED 4X4 FLEETSIDE ** ...My Ebay

04-01-2005, 02:44 PM	#24
kballan Registered User Join Date: Jun 2003 Location: Fort Frances, Ontario, Canada Posts: 373	PM sent on the custom door emblems. __________________ Kent Ballan ANY MAN CAN BUILD A TRUCK, BUT IT TAKES A REAL MAN TO CUT ONE UP!

04-18-2005, 05:26 AM	#25
humbulay 1971 C10 LWB under const. Join Date: Oct 2002 Location: Evansville,IN Posts: 91	about the 72' swb whats the floor of the 72 swb bed loook like? any pics? __________________ I see getting married as a can't lose situation........... either gonna live happily ever after or get my 1st wife outta the way

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.