Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-02-2005, 02:56 PM | #1 |
F.A.S.T. president
Join Date: Sep 2003
Location: Florida
Posts: 1,883
|
need step side measurements, please
I need the measuements of all the cross sills under a step side bed LxWxH, thanks
__________________
F.A.S.T. President and Founder Fabricators for the Advancement of Sawsall Technology "A fear of the Sawsall is a sign of retarded sexual and emotional maturity." ~Sigmund Freud, "General Introduction to Psychoanalysis" |
04-03-2005, 07:07 PM | #2 |
'71 chevy s.bed/s.side
Join Date: Mar 2005
Location: Chesapeake, VA
Posts: 1,571
|
I have the short stepside. I measured my cross sills and came up with the following;
(3) of them are 49 1/2" long. At the base where they sit on the frame they are 2 3/4" wide and at the top where the wood sits -1 1/2" wide. Now, these three are 2 1/4" high. The shorter one has the same dimensions, but it is 1" high. I know it takes three of the taller sills, but I could find only one of the shorter ones, and for some reason I was thinking it took two of the shorter ones. Not sure on that. However, if you have a LMC book, they have a good exploded view of the stepside bed. This will give you an idea of what these sills look like. They just do not list the quantity needed...it states "as required". Also, LMC lists the length of the taller ones at 49 7/8" long, but I went back and remeasured mine and they are 49 1/2" long. To my knowledge mine are unaltered. I don't think this matters...just an FYI. Hope this helps. |
04-03-2005, 07:33 PM | #3 |
F.A.S.T. president
Join Date: Sep 2003
Location: Florida
Posts: 1,883
|
perfect....thanks for the help
Juan
__________________
F.A.S.T. President and Founder Fabricators for the Advancement of Sawsall Technology "A fear of the Sawsall is a sign of retarded sexual and emotional maturity." ~Sigmund Freud, "General Introduction to Psychoanalysis" |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|