Interest in 72 Suburban????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob Moore · 04-09-2005, 12:27 AM

Local yard has 72 Suburban to part. Front brakes gone, front fenders gone, windshield gone. All 3 doors available with door panels, glass, regulators etc.
Hood available, rear hatch and gate available, steering column avail., side glass avail., 2nd and 3rd seats with brackets available. I am assuming the interior rear panels are available. Dash pad is gone. Don't know the grill condition or core support. Motor is small block - short block only left.

This posting to judge interest in doors/seats/hatch & gate.

Give me an idea of price and desirability.

Thanks - Bob

cornutz · 04-09-2005, 11:44 AM

I am guessing that the column is not a tilt, right? If it is, I would be interested....

NutZ

RED72blazer · 04-09-2005, 05:30 PM

i need that hood and the front doors.

Bob Moore · 04-09-2005, 08:45 PM

Cornutz - Column is non-tilt. Sorry. Did you get ahold of Mike at Grumpy's Place?

Red - I will pull the doors if still there on Sunday. Also the hood if you want it. I have other hoods if it is not good. PM me with your phone # and I will call tomorrow morning shortly after they open - 9AM. The front doors looked good with glass. The door handle on the driver door is gone and the door remote spring is broken. The glass regulator splines are shot - handle will not work. Passenger door was jammed shut - would not open - but we did not try very hard. Passenger outside handle might also be missing. I left the wrecking yard at noon and those parts were still there. The driver fender was gone and the passenger side fender was smacked - maybe why the door did not open. Both doors had speaker holes cut out - very poor job - but could work around it. Price will be in the $150.00 range each. Give me an idea if you are interested. Will be out for dinner tonight but will check back tonight.

neonlarry · 04-09-2005, 08:51 PM

I'm not interested, but the 2nd & 3rd seat brackets are hard to come by. I've seen them go for up to $75. Also the rear panels, if in good shape can fetch top dollar.

Bob Moore · 04-09-2005, 09:15 PM

Neonlarry - Thank you for the info. Do you mean the legs,etc. or the holddowns? The legs were there but no hold downs. The side panels behind the doors - like over the wheelwells were MIA.

RED72blazer · 04-09-2005, 09:27 PM

I will have to pass, I'm looking for something really clean without rust or speaker holes. I don't even need glass, just clean shells to cut down for my blazer.

thanks
red72

04-09-2005, 12:27 AM	#1
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Interest in 72 Suburban????? Local yard has 72 Suburban to part. Front brakes gone, front fenders gone, windshield gone. All 3 doors available with door panels, glass, regulators etc. Hood available, rear hatch and gate available, steering column avail., side glass avail., 2nd and 3rd seats with brackets available. I am assuming the interior rear panels are available. Dash pad is gone. Don't know the grill condition or core support. Motor is small block - short block only left. This posting to judge interest in doors/seats/hatch & gate. Give me an idea of price and desirability. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

04-09-2005, 05:30 PM	#3
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	i need that hood and the front doors. __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

04-09-2005, 08:45 PM	#4
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Parts Cornutz - Column is non-tilt. Sorry. Did you get ahold of Mike at Grumpy's Place? Red - I will pull the doors if still there on Sunday. Also the hood if you want it. I have other hoods if it is not good. PM me with your phone # and I will call tomorrow morning shortly after they open - 9AM. The front doors looked good with glass. The door handle on the driver door is gone and the door remote spring is broken. The glass regulator splines are shot - handle will not work. Passenger door was jammed shut - would not open - but we did not try very hard. Passenger outside handle might also be missing. I left the wrecking yard at noon and those parts were still there. The driver fender was gone and the passenger side fender was smacked - maybe why the door did not open. Both doors had speaker holes cut out - very poor job - but could work around it. Price will be in the $150.00 range each. Give me an idea if you are interested. Will be out for dinner tonight but will check back tonight. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

04-09-2005, 08:51 PM	#5
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	I'm not interested, but the 2nd & 3rd seat brackets are hard to come by. I've seen them go for up to $75. Also the rear panels, if in good shape can fetch top dollar. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

04-09-2005, 09:15 PM	#6
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Neonlarry - Thank you for the info. Do you mean the legs,etc. or the holddowns? The legs were there but no hold downs. The side panels behind the doors - like over the wheelwells were MIA. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

04-09-2005, 11:44 AM	#2
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	I am guessing that the column is not a tilt, right? If it is, I would be interested.... NutZ

04-09-2005, 09:27 PM	#7
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	I will have to pass, I'm looking for something really clean without rust or speaker holes. I don't even need glass, just clean shells to cut down for my blazer. thanks red72 __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.