4 or 5 Point Harness'

[Georgie69]

I'm trying to decide if I should put the harness' in. If anyone has could you please post a picture for me thanks a BUNCH!!!!

[7T7]

After looking at some of the 4 point harnesses I decided to go with this 3 point system from Corbeau,
Unlike a conventional 3 or 4 point harness where you are locked into place the 3 point harness I have gives you the freedom to move around if need be but locks into place just like the belts in your new car. It has a retractor on the third point behind the seat. It's pretty neat!http://www.soloracer.com/corbeau3ptret.html

[Mudder]

Where did u get your seats? Like your setup.

[Col Clank]

what seats and what seat brackets are you using?

[Georgie69]

Those are nice but the seats that I have have the cut outs for the 5 point and can get harness' I just wanted to know what they were going to look like before I went and bought the harness'

Thank you for the picture it looks great

[7T7]

Mudder67
Col Clank

The seats are Summits Euro sport seats. For $200 each they are surprisingly nice seats.
As for mounting them, I made a simple rectangle frame out of 1” square tubing that runs across the floor pan then welded tabs to the frame where the stock bench seat bolted to the floor. I drilled out the tabs over the 4 mounting holes then bolted the frame to the floor.
Then bolted the summit seats to that.

If I get a chance I’ll try and get some pictures of the frame this weekend.

[Georgie69]

Does anyone else have any pictures PLEASE...I don't want to do it if it looks like garbage

[kamikazegmc]

not my setup, but i was think of doing some thing like it in my 63.