A few spring questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ochre · 04-27-2005, 12:34 AM

Hi guys, I've got a '72 3/4 ton LWB 2WD with coil springs

Truck currently has a 350 under the hood - I'm looking for some drop (not much - not more than 2") and only in the front for a little bit more aggressive stance. Search is down otherwise I'd probably be able to find the answers that way...

My questions are
1) are the I6 springs any different than the SB springs? I know the BB/SB springs were different, are the SB/I6 springs different?
2) are the 3/4 ton and 1/2 ton front springs different, or did they just put heavier rears in the 3/4 tons?

Thx for the help

04-27-2005, 12:34 AM	#1
Ochre Registered User Join Date: Mar 2005 Location: minnesota Posts: 78	A few spring questions Hi guys, I've got a '72 3/4 ton LWB 2WD with coil springs Truck currently has a 350 under the hood - I'm looking for some drop (not much - not more than 2") and only in the front for a little bit more aggressive stance. Search is down otherwise I'd probably be able to find the answers that way... My questions are 1) are the I6 springs any different than the SB springs? I know the BB/SB springs were different, are the SB/I6 springs different? 2) are the 3/4 ton and 1/2 ton front springs different, or did they just put heavier rears in the 3/4 tons? Thx for the help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.