![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2005
Location: Austin, TX
Posts: 1,224
|
which should I use?
I want to do a 3" drop on the front of my '77. I have both DJM 3" drop tubular A arms, and 3" drop BellTech spindles. I'm a little nervous about the DJM arms due to that other thread. If I use the spindles, I will have to convert to the 1" thick rotors because they are the 3120's. That's not a big deal because I have to buy new rotors and calipers anyway. So which should I do... take my chances with the DJM arms, or convert to 1" rotors and use the BellTech spindles?
__________________
- Greg |
![]() |
![]() |
![]() |
#2 |
BK Built
Join Date: Aug 2004
Location: Oroville, WA
Posts: 478
|
im not sure about converting, but ive heard of problems with the lower control arms hitting the wheel weights used to balance the wheels when using the 3" spindles, i know mine do. Im gonna sell mine and get 2.5" spindles, or just get 20's and not worry about it
![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2002
Location: Trenton ,Texas
Posts: 328
|
i orderd a set of 3120s also. will i have to covert to 1" rotors also? i have a 72 c10. or is that stock for my truck? jezz, i sure hope that i dont have to change all that stuff out, its all new.......stylin concepts said there specificaly made for the 71-72 trucks??? rat
|
![]() |
![]() |
![]() |
#4 | |
Registered User
Join Date: Apr 2005
Location: Austin, TX
Posts: 1,224
|
Quote:
__________________
- Greg |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|