![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Oct 2004
Location: Walker Co. Alabama
Posts: 474
|
Horn Question. I Need Help
I got a 1969 GMC with standard column and I need to get my horn to work. Where is the horn relay located? The previous owner had a push button mounted in the instrument panel and it looked like crap! I want to get it back onto the column where it's supposed to be but ineed to locate the relay. If a van tilt column is installed does all the wiring match up and the horn work? My problem may be in the column itself.
__________________
If it don't fit, force it,...If it still don't fit , modify it 'till it does fit !!! ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
the relay is right by the fuse panel...above and to the left I think.
As for the van tilt...electricly, the only thing that needs addressed, normally you need an adapter for the harness, and there is a single wire you hook to the fuse box for the shift indicator lamp. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,445
|
![]()
I just put a newer type steering wheel (94)on my van tilt and the wheel stuc out to far from colum.The tilt I have has a nut behind that holds the shaft together,the threads stuck out a little bit farther then the splines that hold the wheel on .I took a grinder and knocked the threads off about a 1/4" back from splines and now the wheel sits close to colum like it should. JUST A FYI and the harness adapter is all u need
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|