The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-11-2005, 06:59 PM   #1
ozzyracing
Registered User
 
Join Date: Mar 2005
Location: Arizona
Posts: 260
Need help with my 65

What are the signs of needing a front end alignment?

My truck wonders every once in a while? What should I do?
ozzyracing is offline   Reply With Quote
Old 05-11-2005, 10:24 PM   #2
XXL
Seņor Member
 
XXL's Avatar
 
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
Quote:
Originally Posted by ozzyracing
What are the signs of needing a front end alignment?

My truck wonders every once in a while? What should I do?
Can you give more details on what it's doing? "Every once in a while" gives me the impression you may have some worn parts... which need to be replaced before you spend any effort on alignment.
XXL is offline   Reply With Quote
Old 05-11-2005, 10:44 PM   #3
ozzyracing
Registered User
 
Join Date: Mar 2005
Location: Arizona
Posts: 260
The truck usually wanders when I hit bumps in the road (paved) and at high speeds (55+ on freeway). If I am driving slower it drives straight but if I hit the bumps at low speed it still wanders (not big bumps). I don't know where to begin but I want to feel a bit safer driving it around.

Thanks

65 swb 454 350t
ozzyracing is offline   Reply With Quote
Old 05-12-2005, 08:28 AM   #4
XXL
Seņor Member
 
XXL's Avatar
 
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
Definitely sounds like worn parts. I'd start by checking the slop in the steering box, Pittman and idler arms, and go out from there. I suspect you're going to find the steering box has lots of play in it.
XXL is offline   Reply With Quote
Old 05-12-2005, 12:32 PM   #5
ozzyracing
Registered User
 
Join Date: Mar 2005
Location: Arizona
Posts: 260
Alright, sounds good. But how do I check that? Do they need to measured or just try to move them around by hand? I know I sound really stupid but I have never done any suspension work before.
__________________
65 SWB 454 350T
ozzyracing is offline   Reply With Quote
Old 05-12-2005, 06:42 PM   #6
XXL
Seņor Member
 
XXL's Avatar
 
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
Quote:
Originally Posted by ozzyracing
...I have never done any suspension work before.
I would recommend you take it to a professional. You can get some sense of whether you've got worn parts by isolating them and giving them a wiggle and tug here and there, but you don't want to misdiagonse something as critical as the suspension. Best case, you'll spend money on parts you don't need. Worst case, you could end up in a dangerous situation.
XXL is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com