![]() |
![]() |
#1 |
Registered User
Join Date: May 2005
Location: Texarkana, AR 71854
Posts: 397
|
Front Right Brake
I am going through the brakes on my 69 (had none when I bought it) when I replaced all 4 wheel cyl. I replaced the front driver side I noticed that there was no metal brake line connected to the rubber one. The T was blocked off. Does anyone know the length of that line?
Also I want to replace the "Tee" front and back What size are they? I am not too mechnically inclined in the automotive world. Mucho thanks
__________________
2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3 |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
I think that I would consider replacing the front brake lines. You may not have the original line on there now and I certainly would not trust anyone's work where they blocked off the lines going to the brakes on one wheel.
Take a look at the rear lines also. Getting the brakes right is worth the extra effort and cost. Here is a link for brake lines and there are others. Jim http://www.inlinetube.com/ |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|