Roll bar color - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Gary 70 Jimmy** · 05-30-2005, 09:09 AM

What clor should I paint my roll bar the same color as the jimmy (blue) or the same color as rhe seats (off white) or the same color as the carpet dash pad and steering wheel (gold or brown)

LUV2XCLR8 · 05-30-2005, 09:14 AM

IS THIS A POLL

1.) BODY COLOR

2.) WHITE

3.) CARPET

bouncytruck · 05-30-2005, 12:34 PM

Quote:

Originally Posted by LUV2XCLR8

IS THIS A POLL

1.) BODY COLOR

2.) WHITE

3.) CARPET

Ditto!

The only other option would be black

Paul72 · 05-30-2005, 01:16 PM

The only option in my mind is satin black, unless it's chrome. When I do finally get one, it will be black (on a green blazer with white interior).

Paul

**Gary 70 Jimmy** · 05-30-2005, 05:39 PM

How does orange look where do you put the passenger seat belt at when you have a rollbar

LUV2XCLR8 · 05-30-2005, 05:41 PM

Not sure what you mean by passenger seat belt

**Gary 70 Jimmy** · 05-30-2005, 05:42 PM

maybe I will paint it the same color as the seats

**Gary 70 Jimmy** · 05-30-2005, 05:45 PM

The passenger seat belt bolts to the back floor right where the roll bar bolts to the floor

71jimmy · 05-30-2005, 08:39 PM

The passenger belt bolts to the raised piece that separates your front floor with the rear. I have the same roll bar (only satin black, hehe), no prob mounting the factory belt.

HatGuy · 05-30-2005, 11:29 PM

Powder coated mine gloss black on a white blazer.
Lots of complements.

**Gary 70 Jimmy** · 05-31-2005, 08:24 AM

71jimmy can you get me a pic where you seat belt the retractable one thanks gary

71jimmy · 05-31-2005, 12:23 PM

Might take me awhile to take a pic, it's stuffed in the garage right now and would need to take it out to get a good angle for a pic.

blazerparts · 05-31-2005, 06:00 PM

the passenger seatbelt belongs around the passenger

71RestoRod · 05-31-2005, 06:34 PM

Wow, Gary!

That looks like the same blue I used on my Chevy!!!

**Gary 70 Jimmy** · 06-01-2005, 08:19 AM

maybe I will put the passengers in the back then I wont need a seat belt in the front

*Medicanman71* · 06-01-2005, 09:42 AM

yea seat belts is still on my list too

71jimmy · 06-02-2005, 12:26 AM

Gary, if you go to this link on ebay and look at the bottom row of pictures, third from left, you will see how the stock passenger seat belt mounts. My rollbar mounts on top of the raised rear floor at the edge, there is no interference with the belt. By the looks of it your rollbar looks the same as mine. Sorry, but I don't have the time right now to pull mine out and take pictures, work is a biatch and I'm on the road (thanks to free internet access at the hotels I can at least keep up with the board). If this pic doesn't help, maybe you could post a pic of the area your asking about.

http://cgi.ebay.com/ebaymotors/ws/eB...553654667&rd=1

vtblazer · 06-02-2005, 06:28 AM

Rollbar - BLACK

Seatbelt debate:
Your both correct.

The vertical panel at the front of the bed is the more common spot BUT
I've owned a blazer that did have it about 4/6 inches back on the horizontal portion of the bed floor.
That would be right where the rollbar would sit.

Is it the pic or does that rollbar lean forward some?

2wdBlazer · 06-02-2005, 08:09 AM

Black is the only color that I think would not look out of place.

**Gary 70 Jimmy** · 06-02-2005, 08:29 AM

Thanks 71jimmy that looks like the only place to put it is that where yours is I will have to drill a hole for it.
I will put my pics on paint brush and try some differant colors

**Gary 70 Jimmy** · 06-02-2005, 08:32 AM

The roll bar is just siting in their not bolted in.

*Medicanman71* · 06-02-2005, 09:25 AM

when you bolt it in, dont forget the backing plates

71jimmy · 06-02-2005, 12:05 PM

I didn't know there are other places for the seatbelts to mount. Mine is like the one in the picture ( I guess thankfully). This is the only Jimmy/Blazer I've ever owned or been close too. Maybe it's a difference between the '70 and '71 Jimmy's. Gary, what does your passenger seatbelt retractor look like? Is it the stubby one in the pic?

Oh yeah, I vote for a black rollbar!

**Gary 70 Jimmy** · 06-02-2005, 05:02 PM

I dont have a backing plate does it go on the bottom side of the bed floor

My seat belt is the short one

vtblazer · 06-02-2005, 07:51 PM

Quote:

Originally Posted by Gary 70 Jimmy

I dont have a backing plate

Should be inclusive in the parts that hold the captive nut underneath.
Welded on place.

05-30-2005, 09:09 AM	#1
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Roll bar color What clor should I paint my roll bar the same color as the jimmy (blue) or the same color as rhe seats (off white) or the same color as the carpet dash pad and steering wheel (gold or brown)

05-30-2005, 09:14 AM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	IS THIS A POLL 1.) BODY COLOR 2.) WHITE 3.) CARPET __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 05-30-2005 at 09:15 AM.

05-30-2005, 01:16 PM	#4
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	The only option in my mind is satin black, unless it's chrome. When I do finally get one, it will be black (on a green blazer with white interior). Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

05-30-2005, 05:39 PM	#5
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	How does orange look where do you put the passenger seat belt at when you have a rollbar Attached Images

05-30-2005, 05:41 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Not sure what you mean by passenger seat belt __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-30-2005, 05:42 PM	#7
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	maybe I will paint it the same color as the seats Last edited by Gary 70 Jimmy; 10-24-2008 at 09:02 AM.

05-30-2005, 05:45 PM	#8
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	The passenger seat belt bolts to the back floor right where the roll bar bolts to the floor

05-30-2005, 08:39 PM	#9
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	The passenger belt bolts to the raised piece that separates your front floor with the rear. I have the same roll bar (only satin black, hehe), no prob mounting the factory belt. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

05-30-2005, 11:29 PM	#10
HatGuy Registered User Join Date: Aug 2003 Location: Fort Worth Texas Posts: 275	Powder coated mine gloss black on a white blazer. Lots of complements. __________________ Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html

05-31-2005, 08:24 AM	#11
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	71jimmy can you get me a pic where you seat belt the retractable one thanks gary

05-31-2005, 12:23 PM	#12
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Might take me awhile to take a pic, it's stuffed in the garage right now and would need to take it out to get a good angle for a pic. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

05-31-2005, 06:00 PM	#13
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	the passenger seatbelt belongs around the passenger __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

05-31-2005, 06:34 PM	#14
71RestoRod Registered User Join Date: Sep 2003 Location: Evergreen, CO Posts: 494	Wow, Gary! That looks like the same blue I used on my Chevy!!! __________________ 71 Blazer / GMPP ZZ383 / MPFI / 700R4 / 4-Wheel Disk / Ground-up frame off almost completed resto-mod

06-01-2005, 08:19 AM	#15
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	maybe I will put the passengers in the back then I wont need a seat belt in the front

06-01-2005, 09:42 AM	#16
Medicanman71 Account Suspended Join Date: May 2005 Location: Where the Wild Things Are Posts: 696	yea seat belts is still on my list too



Register or Log In To remove these advertisements.

06-02-2005, 12:26 AM	#17
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Gary, if you go to this link on ebay and look at the bottom row of pictures, third from left, you will see how the stock passenger seat belt mounts. My rollbar mounts on top of the raised rear floor at the edge, there is no interference with the belt. By the looks of it your rollbar looks the same as mine. Sorry, but I don't have the time right now to pull mine out and take pictures, work is a biatch and I'm on the road (thanks to free internet access at the hotels I can at least keep up with the board). If this pic doesn't help, maybe you could post a pic of the area your asking about. http://cgi.ebay.com/ebaymotors/ws/eB...553654667&rd=1 __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all." Last edited by 71jimmy; 06-02-2005 at 12:27 AM.

06-02-2005, 06:28 AM	#18
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Rollbar - BLACK Seatbelt debate: Your both correct. The vertical panel at the front of the bed is the more common spot BUT I've owned a blazer that did have it about 4/6 inches back on the horizontal portion of the bed floor. That would be right where the rollbar would sit. Is it the pic or does that rollbar lean forward some?

06-02-2005, 08:09 AM	#19
2wdBlazer The Blazer King Join Date: Sep 2000 Location: Valrico, Fl (Tampa) Posts: 1,213	Black is the only color that I think would not look out of place. __________________ 72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest.

06-02-2005, 08:29 AM	#20
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Thanks 71jimmy that looks like the only place to put it is that where yours is I will have to drill a hole for it. I will put my pics on paint brush and try some differant colors

06-02-2005, 08:32 AM	#21
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	The roll bar is just siting in their not bolted in.

06-02-2005, 09:25 AM	#22
Medicanman71 Account Suspended Join Date: May 2005 Location: Where the Wild Things Are Posts: 696	when you bolt it in, dont forget the backing plates

06-02-2005, 12:05 PM	#23
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	I didn't know there are other places for the seatbelts to mount. Mine is like the one in the picture ( I guess thankfully). This is the only Jimmy/Blazer I've ever owned or been close too. Maybe it's a difference between the '70 and '71 Jimmy's. Gary, what does your passenger seatbelt retractor look like? Is it the stubby one in the pic? Oh yeah, I vote for a black rollbar! __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

06-02-2005, 05:02 PM	#24
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	I dont have a backing plate does it go on the bottom side of the bed floor My seat belt is the short one

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.