WTB : 4"-6" lift kit for 67-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BAD4X4** · 06-13-2005, 05:34 PM

I'm looking for a good 4-6" lift kit for my new 1972 k20. I would like a good used one. I don't want to spend alot of money on a work truck.Thanx for the help. Dana

ryanroo · 06-13-2005, 05:51 PM

i have an 8 inch all spring kit that is still on the truck(been setting for about 3 years) with like 250 miles on it. considering selling it.
Ryan

**BAD4X4** · 06-13-2005, 09:35 PM

Didn't really wanna go that big, but I will think about it. Do you have any pics of the kit on the truck and pics of under the truck. Thanx Dana

**special-K** · 06-14-2005, 05:45 AM

Hey Ryan,how much dinero?

ryanroo · 06-14-2005, 10:24 PM

i have a few pictures, but not on thiscomputer, i could get some if you wanted. for all four springs and a drop draglink and raised steering arm (71/72 d44 only) i would like to get like 550 dollars plus the cost of shipping from 50801. i paid over 1300 when i bought it, but that was with shocks and brake lines. i will keep the lines and the shocks are ruined from setting without use for to long. this is still on the truck and i would have to have time to remove it and get new springs for it as well.
Thanks
Ryan

**BAD4X4** · 06-16-2005, 08:23 PM

I know when I didn't need a lift a couple weeks ago there was a ton for sale, just my luck...............

orange72blazer · 06-17-2005, 08:16 AM

I'll have some 4" front springs for sale in a couple of days. They have about 250 miles on them. I'm asking $100 for them plus shipping. I plan on putting my new springs on this weekend.

**BAD4X4** · 06-17-2005, 07:48 PM

Orange is that just for the front springs? Why are you changring out? Thanx Dana

orange72blazer · 06-17-2005, 10:02 PM

Yes its just the front springs. You would have to buy blocks for the rear($38) , and u bolts (about $35) then you would have a complete lift kit. The only reason I'm changing the springs is I don't like how ruff it rides with them on. Lower Michigan has the worst roads in the country and I can hardly keep my Blazer on the road, so I thought I would try some springs that everyone claims ride better.

**BAD4X4** · 06-17-2005, 10:59 PM

Orange,what kind of springs are they?

orange72blazer · 06-18-2005, 07:53 AM

Rough Country.

toolpimp · 06-18-2005, 12:15 PM

Ryanroo, id be interested in your 8" lift , of course if its still for sale.p.m. me or tool_pimp@hotmail.com. I have a 70 3/4 ton 4x4 with dana 44/60 setup.

**BAD4X4** · 06-18-2005, 12:24 PM

Orange I think the name says it all ROUGH rideing. I will have to pass on the springs I want a whole complete kit. I guess I will have to go back to evil-bay. Thanx Dana

muddyole 69 · 06-19-2005, 01:33 AM

I bought a dick cepek kit advertised as 5 inch from davy's in Tenn fit up good rides great got is for like 365 shipped said no drop arm required

I would get one it looked kinda spooky with the stock setup my 2 cents drop arm is money well spent hope this helps Mike

**BAD4X4** · 06-26-2005, 08:55 PM

Ttt

06-13-2005, 05:34 PM	#1
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	WTB : 4"-6" lift kit for 67-72 I'm looking for a good 4-6" lift kit for my new 1972 k20. I would like a good used one. I don't want to spend alot of money on a work truck.Thanx for the help. Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-13-2005, 05:51 PM	#2
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	i have an 8 inch all spring kit that is still on the truck(been setting for about 3 years) with like 250 miles on it. considering selling it. Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

06-13-2005, 09:35 PM	#3
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Didn't really wanna go that big, but I will think about it. Do you have any pics of the kit on the truck and pics of under the truck. Thanx Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-14-2005, 05:45 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Hey Ryan,how much dinero? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-14-2005, 10:24 PM	#5
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	i have a few pictures, but not on thiscomputer, i could get some if you wanted. for all four springs and a drop draglink and raised steering arm (71/72 d44 only) i would like to get like 550 dollars plus the cost of shipping from 50801. i paid over 1300 when i bought it, but that was with shocks and brake lines. i will keep the lines and the shocks are ruined from setting without use for to long. this is still on the truck and i would have to have time to remove it and get new springs for it as well. Thanks Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions Last edited by ryanroo; 06-14-2005 at 10:26 PM.

06-16-2005, 08:23 PM	#6
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	I know when I didn't need a lift a couple weeks ago there was a ton for sale, just my luck............... __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-17-2005, 08:16 AM	#7
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	I'll have some 4" front springs for sale in a couple of days. They have about 250 miles on them. I'm asking $100 for them plus shipping. I plan on putting my new springs on this weekend.

06-17-2005, 07:48 PM	#8
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Orange is that just for the front springs? Why are you changring out? Thanx Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-17-2005, 10:02 PM	#9
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Yes its just the front springs. You would have to buy blocks for the rear($38) , and u bolts (about $35) then you would have a complete lift kit. The only reason I'm changing the springs is I don't like how ruff it rides with them on. Lower Michigan has the worst roads in the country and I can hardly keep my Blazer on the road, so I thought I would try some springs that everyone claims ride better.

06-17-2005, 10:59 PM	#10
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Orange,what kind of springs are they? __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-18-2005, 07:53 AM	#11
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Rough Country.

06-18-2005, 12:15 PM	#12
toolpimp too many toys Join Date: Oct 2004 Location: winnipeg sorta Posts: 63	wtb spring lift Ryanroo, id be interested in your 8" lift , of course if its still for sale.p.m. me or tool_pimp@hotmail.com. I have a 70 3/4 ton 4x4 with dana 44/60 setup. __________________ if we were all fatter we'd be closer together 1971 gmc 3/4 4x4 383 stroked 1968 1/2 2nd owner 4bbl 6cyl 1969 gmc 3/4 4 sale 350 4bbl 4spd 1969 chev 1/2 lowered 5 spd 454 4bbl 1947 chev coupe 2002 harley flhtcui 6 -67-72 my parts

06-18-2005, 12:24 PM	#13
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Orange I think the name says it all ROUGH rideing. I will have to pass on the springs I want a whole complete kit. I guess I will have to go back to evil-bay. Thanx Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-19-2005, 01:33 AM	#14
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	lift I bought a dick cepek kit advertised as 5 inch from davy's in Tenn fit up good rides great got is for like 365 shipped said no drop arm required I would get one it looked kinda spooky with the stock setup my 2 cents drop arm is money well spent hope this helps Mike __________________ hav'n fun be'n me

06-26-2005, 08:55 PM	#15
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Ttt __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.