![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2005
Location: Iowa
Posts: 1
|
![]() ![]() i have a 78 chevy C10 w/350 my speedo died on me a wile back and i found that the gear on the driveshaft has moved way out of place. i was wondering if there is an easy way to get it back where it belongs without taking a U-joint off. thanks Matt |
![]() |
![]() |
![]() |
#2 |
needin' money
Join Date: May 2005
Location: Chickasha, Oklahoma
Posts: 1,106
|
if you're lucky like i was, then stick 2 of your fingers in the transmission where the cable connects and feel down in there for them, i had the truck for two weeks, then i thought i guess i need to get the speedo working, i took the cable off, spun it, it registered on the speedo, cable good, i feel down in there, its just down in there, pull it out go around the block, make a short story long, now the speedo works
|
![]() |
![]() |
![]() |
#3 |
75 STEPSIDE
Join Date: Mar 2005
Location: Suffolk, VA
Posts: 92
|
If your tranny is a turbo 350, remove the drive shaft, take off the 4 bolts that hold the tail cone on the back of the tranny, the plastic gear is held on by a clip.
__________________
Pete 75 Chevy Stepside 70 Buick Skylark/GS |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|