WTB: RamHorns (Used 4 around $50 Shipped???) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 06-27-2005, 10:21 PM

I'm looking for a set of RamHorn Manifolds for around $50 shipped or less if you are willing to part for just shipping or whatever. It's ok if they need studs - well if the stud are broken flush off with the flange i might not want them. (i.e. I would rather try to heat them and get them out without drilling and tapping if possible, but will drill if i need to)

Also if anyone has the front sections of exahust pipe for the driver & Pass side I would be interested - mainly from the flange until it bends out to head straight back.

Can anyone help??? I would rather run duals than the crappy looking peiced together y-pipe exahust that is on the truck now.

Thanks Guys
PayPal Payment Preferred - I'll pay the fee too, but will do MO if i have to

greenhorn male · 06-27-2005, 10:43 PM

I have some but they are all straight dump; 4x4 application I beleive.

arkracing · 06-27-2005, 10:46 PM

I need the angle back Dumps - RandyC10 Has the Primary Pipes to fit on them so I would like to use those. Thanks though

billsbowtie · 06-27-2005, 10:47 PM

i have a pair also $50.00 shipped i will try to find a pic.

billsbowtie · 06-27-2005, 10:50 PM

these are straight dump.

billsbowtie · 06-27-2005, 10:54 PM

i have the drivers side angle dump $25.00 shipped if you need it.

arkracing · 06-27-2005, 11:03 PM

Quote:

Originally Posted by billsbowtie

i have the drivers side angle dump $25.00 shipped if you need it.

I'd like to try and buy a pair of the angle dumps if i could.

billsbowtie · 06-27-2005, 11:10 PM

ok its here if you need it . bill

arkracing · 06-28-2005, 07:13 AM

TTT for the AM Crowd

arkracing · 06-28-2005, 09:36 PM

TTT anyone. is $50 to low? i'm just poor that's all

**too much stuff** · 06-28-2005, 10:38 PM

I have a pair of angle dumps that will need the studs heated out. Depending on shipping price, i will work with ya. PM me if you want to know more, Eric

indiana jeff · 06-30-2005, 04:42 PM

http://store.yahoo.com/dpstore/repai...-350-5-7l.html

I think www.directauto.com will also get you there.

Prices have gone up a little ($10 ea) since I got mine in the fall. Mine came shipped with some sort of greasy anti-rust protection on them. The dr. side had GM casting # on it, Pass side had been recently ground off.

I either didn't read close enough or was shipped the wrong ones...they came with the ports for AIR injection. I just plugged the hole with some allen head plugs.

They LOOK pretty good. BUT I'm still working on my project and haven't installed them yet.

hope this helps.

tomatocity · 06-30-2005, 09:26 PM

Quote:

Originally Posted by arkracing

I'd like to try and buy a pair of the angle dumps if i could.

what is the outlet size of the center dumps? Looking for a pair of 2.5".

06-27-2005, 10:21 PM	#1
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	WTB: RamHorns (Used 4 around $50 Shipped???) I'm looking for a set of RamHorn Manifolds for around $50 shipped or less if you are willing to part for just shipping or whatever. It's ok if they need studs - well if the stud are broken flush off with the flange i might not want them. (i.e. I would rather try to heat them and get them out without drilling and tapping if possible, but will drill if i need to) Also if anyone has the front sections of exahust pipe for the driver & Pass side I would be interested - mainly from the flange until it bends out to head straight back. Can anyone help??? I would rather run duals than the crappy looking peiced together y-pipe exahust that is on the truck now. Thanks Guys PayPal Payment Preferred - I'll pay the fee too, but will do MO if i have to __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered Last edited by arkracing; 06-27-2005 at 10:27 PM.

06-27-2005, 10:43 PM	#2
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	I have some but they are all straight dump; 4x4 application I beleive. __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

06-27-2005, 10:46 PM	#3
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	I need the angle back Dumps - RandyC10 Has the Primary Pipes to fit on them so I would like to use those. Thanks though __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

06-28-2005, 07:13 AM	#9
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	TTT for the AM Crowd __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

06-28-2005, 09:36 PM	#10
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	TTT anyone. is $50 to low? i'm just poor that's all __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

06-27-2005, 10:47 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i have a pair also $50.00 shipped i will try to find a pic.

06-27-2005, 10:50 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	these are straight dump.

06-27-2005, 10:54 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i have the drivers side angle dump $25.00 shipped if you need it.

06-27-2005, 11:10 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	ok its here if you need it . bill

06-28-2005, 10:38 PM	#11
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	I have a pair of angle dumps that will need the studs heated out. Depending on shipping price, i will work with ya. PM me if you want to know more, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-30-2005, 04:42 PM	#12
indiana jeff Registered User Join Date: Feb 2005 Location: SE Indiana Posts: 3	How about this place? http://store.yahoo.com/dpstore/repai...-350-5-7l.html I think www.directauto.com will also get you there. Prices have gone up a little ($10 ea) since I got mine in the fall. Mine came shipped with some sort of greasy anti-rust protection on them. The dr. side had GM casting # on it, Pass side had been recently ground off. I either didn't read close enough or was shipped the wrong ones...they came with the ports for AIR injection. I just plugged the hole with some allen head plugs. They LOOK pretty good. BUT I'm still working on my project and haven't installed them yet. hope this helps. __________________ 1970 c-10 CST LWB 350/350

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.