progress on my interior - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lloyd k · 06-28-2005, 11:57 PM

finally starting on the cosmetics-thought i would share some pictures

purple gas · 06-29-2005, 12:00 AM

Geez, that first pic looks almost exactly like my truck did when I started, only I didn't have a seat or a steering column.

HeavyD · 06-29-2005, 04:20 AM

It looks like you converted the gas pedal to a 71-72 type? I have a setup from a 72 and wondered how hard it would be to swap this into my 70..

chevyfarmer · 06-29-2005, 09:07 AM

That has to be the largest hole I have ever seen cut into a the dash, what was that for a flat screen TV??? What did you cover it with? Looks much better!!! Good Job.

Putter · 06-29-2005, 10:39 AM

In that first pic that shows the bedside & door, I was wondering that type of paint scheme you were running....then I realized it was the shadow from the privacy fence!!! DUUUUHHHHHH!!!

Hey, do you have access to a welder? Or a buddy that welds?? I can send you a center section to get the dash back into shape. It would repair the radio hole and the ashtray hole....unless you are planning to install a small fire-resistant SAFE or something. (j/k).

jtminton · 06-29-2005, 10:58 AM

Quote:

Originally Posted by Putter

In that first pic that shows the bedside & door, I was wondering that type of paint scheme you were running....then I realized it was the shadow from the privacy fence!!! DUUUUHHHHHH!!!

I thought that it was a pretty crappy paint job with lots of runs!

lloyd k · 06-29-2005, 11:06 AM

my cab is a 67 and it came with accelerator rod and it mounted on the outside of the cab,the cable bracket mounts inside and i put my kickdown switch there,on the hole i actually widened it from previous,the guy had scabbed a piece of thin sheet metal over the original radio slot that had been bugard up,i used a piece of aluminum diamond plate that i had ,made it as a removeable so i can put me a radio in there and some extra guages,i need to get a shifter yet,probably a( hurst indy stick),on the outside im going with a satin black and some wheels.

Putter · 06-29-2005, 11:11 AM

Quote:

Originally Posted by jtminton

I thought that it was a pretty crappy paint job with lots of runs!

Looking at it again, I can "see" the runs you mentioned!

lloyd k · 06-29-2005, 11:25 AM

thanks for the replies-this truck has nine lives-hahaha,it actually has flames underneath the primer,i think they primed it before the owner i got it from,i dont have access to a shop so im kinda doing it out in the driveway,had to rebuild the doors-regulators,latches and locks-everything is getting up to snuff, its not going to get a ground up resto but should be fun to drive,look decent and be safe

LUV2XCLR8 · 06-29-2005, 05:12 PM

jamis · 06-29-2005, 10:03 PM

Quote:

Originally Posted by Putter

In that first pic that shows the bedside & door, I was wondering that type of paint scheme you were running....then I realized it was the shadow from the privacy fence!!! DUUUUHHHHHH!!!

LMFAO

mblackburnjr · 06-30-2005, 08:33 PM

Major improvement.The red will look good w/ the black.......
I didnt notice the fence either, and thought you must have masked it off w/ pinstriping and sprayed it w/ a bug sprayer!......lol

krue · 06-30-2005, 08:40 PM

Looks a lot better. Go ahead and mount a TV in that hole in the dash.

stllookn · 07-01-2005, 12:30 AM

ROFLMAO...I thought that was a pretty even run pattern at first, then I thought it was masking then I read PUTTER's post. In this neighborhood a privacy fence is a 14 ft concrete wall...a "Good Neighbor" fence, on the other hand is 14 ft chainlink with razor wire on top...LOL!

06-28-2005, 11:57 PM	#1
lloyd k Registered User Join Date: Feb 2004 Location: columbus,ohio Posts: 201	progress on my interior finally starting on the cosmetics-thought i would share some pictures Attached Images __________________ 67 swb gmc,big block cadillac powered,400 turbo,2.73 ratio and disc brakes-basically a frankenstein of many parts-

06-29-2005, 12:00 AM	#2
purple gas Registered User Join Date: Oct 2004 Location: saskatoon, planet earth Posts: 686	Geez, that first pic looks almost exactly like my truck did when I started, only I didn't have a seat or a steering column. __________________ I got a bench seat baby, you don't have to sit over there.

06-29-2005, 04:20 AM	#3
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,179	It looks like you converted the gas pedal to a 71-72 type? I have a setup from a 72 and wondered how hard it would be to swap this into my 70.. __________________ "You can take the man out of PA, but you can't take PA out of the man"

06-29-2005, 09:07 AM	#4
chevyfarmer Registered User Join Date: Feb 2005 Location: Owosso, Mi Posts: 242	That has to be the largest hole I have ever seen cut into a the dash, what was that for a flat screen TV??? What did you cover it with? Looks much better!!! Good Job. __________________ 67 short wide 355ci 3 on tree 69 short wide 250ci 3 on tree 68 long wide 283 3 on tree 72 2wd Blazer project 454 5 speed Last edited by chevyfarmer; 06-29-2005 at 09:08 AM.

06-29-2005, 10:39 AM	#5
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	In that first pic that shows the bedside & door, I was wondering that type of paint scheme you were running....then I realized it was the shadow from the privacy fence!!! DUUUUHHHHHH!!! Hey, do you have access to a welder? Or a buddy that welds?? I can send you a center section to get the dash back into shape. It would repair the radio hole and the ashtray hole....unless you are planning to install a small fire-resistant SAFE or something. (j/k). __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

06-29-2005, 11:06 AM	#7
lloyd k Registered User Join Date: Feb 2004 Location: columbus,ohio Posts: 201	my cab is a 67 and it came with accelerator rod and it mounted on the outside of the cab,the cable bracket mounts inside and i put my kickdown switch there,on the hole i actually widened it from previous,the guy had scabbed a piece of thin sheet metal over the original radio slot that had been bugard up,i used a piece of aluminum diamond plate that i had ,made it as a removeable so i can put me a radio in there and some extra guages,i need to get a shifter yet,probably a( hurst indy stick),on the outside im going with a satin black and some wheels. __________________ 67 swb gmc,big block cadillac powered,400 turbo,2.73 ratio and disc brakes-basically a frankenstein of many parts-

06-29-2005, 11:25 AM	#9
lloyd k Registered User Join Date: Feb 2004 Location: columbus,ohio Posts: 201	thanks for the replies-this truck has nine lives-hahaha,it actually has flames underneath the primer,i think they primed it before the owner i got it from,i dont have access to a shop so im kinda doing it out in the driveway,had to rebuild the doors-regulators,latches and locks-everything is getting up to snuff, its not going to get a ground up resto but should be fun to drive,look decent and be safe __________________ 67 swb gmc,big block cadillac powered,400 turbo,2.73 ratio and disc brakes-basically a frankenstein of many parts-

06-29-2005, 05:12 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-30-2005, 08:33 PM	#12
mblackburnjr collector of vintage rust Join Date: Apr 2004 Location: southern ohio Posts: 421	Major improvement.The red will look good w/ the black....... I didnt notice the fence either, and thought you must have masked it off w/ pinstriping and sprayed it w/ a bug sprayer!......lol

06-30-2005, 08:40 PM	#13
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Looks a lot better. Go ahead and mount a TV in that hole in the dash. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-01-2005, 12:30 AM	#14
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	ROFLMAO...I thought that was a pretty even run pattern at first, then I thought it was masking then I read PUTTER's post. In this neighborhood a privacy fence is a 14 ft concrete wall...a "Good Neighbor" fence, on the other hand is 14 ft chainlink with razor wire on top...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.