![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2003
Location: Central PA....In the Berg of Nisbet
Posts: 790
|
Man, are the new GM Buckets nice in the '71
Finally got the '00 Buckets and center section in my '71 C-20 project. I originally planned to wait until the body work was done to install them, but decided to put them in now. It sure makes it a nice comfortable truck to drive now!
The only bad part is we've been helping my neighbors irrigate their tomattoe crop and the nice seats are covered in dried mud...........We lost our rented ground last year, so we no longer farm, but I guess once a farm truck, it'll always be a farm truck! ![]() We've been moving hard line and irrigation pumps with it and the Cummins is running great!..............It's probably the only pickup in my area covered with mud. We sure need the rain bad! If anyone is looking at newer GM buckets to put in their ride, I highly recommend them!
__________________
'72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!! |
![]() |
![]() |
![]() |
#2 |
Keep On Truckin'
Join Date: Mar 2003
Location: Buda, Texas
Posts: 1,354
|
The late model seats look real nice and are much more comfortable. I tested some later model seats like that but they shoved me way too close to the steering wheel. At 6'4" and 235# I need a little more room than the new seats afford.
__________________
Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire..... |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Apr 2003
Location: Central PA....In the Berg of Nisbet
Posts: 790
|
Quote:
__________________
'72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!! |
|
![]() |
![]() |
![]() |
#4 |
C10 Club Tennessee
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,281
|
Looks great!
I have those exact seats, but have not installed them yet. Do you have any more pics of the seats or of the install. They would me most helpful. thanks, Bryan
__________________
Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,538
|
I feel your RELIEF.
![]() Have those in my 72 daily driver, know exactly what your saying. ![]() |
![]() |
![]() |
![]() |
#6 | |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Quote:
Were you able to use the '00 brackets and bolt them right in or was there some fab work required? Thanks. Joe |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2003
Location: Central PA....In the Berg of Nisbet
Posts: 790
|
We just drilled holes in the floor for the buckets after moving the sliding track ahead some..........Works well, but be aware that you'll have to put plates on both the top and underside of the floor so they don't eventually bounce through the floor, or pull up through. The center piece took some modification, but basically we just torched off the OEM mounting tabs, and relocated them in the front, and I took a piece of flat stock and ran it across the factory bracket in the rear. I mounted it down lower than the other two so I could throw my ledgers and other junk and not have it slide all over.
![]() Yes, the fuel tank is still behind them too.
__________________
'72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!! |
![]() |
![]() |
![]() |
#8 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Thanks
![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|