truck for sale or will sell parts cheap! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mitzki5 · 06-21-2002, 09:54 PM

There is a truck (60-66 gmc, I think it's a 65 but not sure) in a pasture just down the road from me. Guy wants $150 for truck, yes $150. It has a staight 6 but no trans. Truck is very rough. Would probably only be good for parts. Let me know if you need anything and I will try to get it. Thanks

bbs1965 · 06-22-2002, 05:48 PM

it would be sold if it was near me in Texas

rico_bob · 06-28-2002, 10:45 PM

rico_bob here. What shape is the bed in? I need a shortwheel base step side bed in fair condition. Has to be straight and NOT full of rust or big hiuge dents. I need the step side fenders too. I live in Michigan and could make a trip to IL if the bed is in good enough shape to produce some parts. If I can get some decent parts from the bed, I will make your investment pay off! Can you post any pictures of this truck? Please email me direct with photos!

rico_bob@hotmail.com

Mitzki5 · 06-30-2002, 12:28 AM

you've got mail!

thisimej · 07-08-2002, 02:46 AM

how are the fenders if there bad im not intrested but i do need the heater controles and fan and whatever heater parts are there also the vent duct for the defrosters thanks jay let me know asap e mail me at maidenjay@hazleton.net

frank reber · 08-01-2002, 08:50 PM

can you email me about the 66 chevy truck frankr@paonline.com

06-21-2002, 09:54 PM	#1
Mitzki5 "TRUCKLESS" Join Date: Jan 2002 Location: Tuscola IL Posts: 457	truck for sale or will sell parts cheap! There is a truck (60-66 gmc, I think it's a 65 but not sure) in a pasture just down the road from me. Guy wants $150 for truck, yes $150. It has a staight 6 but no trans. Truck is very rough. Would probably only be good for parts. Let me know if you need anything and I will try to get it. Thanks __________________ Mitzki5 No longer have an old truck! But always looking for another one!

06-28-2002, 10:45 PM	#3
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	What condition is the bed in? I need a bed! rico_bob here. What shape is the bed in? I need a shortwheel base step side bed in fair condition. Has to be straight and NOT full of rust or big hiuge dents. I need the step side fenders too. I live in Michigan and could make a trip to IL if the bed is in good enough shape to produce some parts. If I can get some decent parts from the bed, I will make your investment pay off! Can you post any pictures of this truck? Please email me direct with photos! rico_bob@hotmail.com __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

06-30-2002, 12:28 AM	#4
Mitzki5 "TRUCKLESS" Join Date: Jan 2002 Location: Tuscola IL Posts: 457	you've got mail! __________________ Mitzki5 No longer have an old truck! But always looking for another one!

08-01-2002, 08:50 PM	#6
frank reber Registered User Join Date: Jul 2002 Location: pa. Posts: 7	truck can you email me about the 66 chevy truck frankr@paonline.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-22-2002, 05:48 PM	#2
bbs1965 Open Sundays 10 till 10 Join Date: Nov 2000 Location: Waxahachie,Texas 75165 Posts: 1,009	it would be sold if it was near me in Texas

07-08-2002, 02:46 AM	#5
thisimej Registered User Join Date: Jul 2002 Location: pennsylvania Posts: 2	how are the fenders if there bad im not intrested but i do need the heater controles and fan and whatever heater parts are there also the vent duct for the defrosters thanks jay let me know asap e mail me at maidenjay@hazleton.net



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.