Chevy 454, Hydro clutch, SM465, 32 spline NP205's & TH400 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kennyw · 07-12-2005, 12:56 PM

454 big block, stock, strong runner, all accessories, drive it before I pull it $750 **SOLD**

Hydro clutch bellhousing, lines, master, pedals $250 **SOLD**

SM465 - 2wd 35 spline output (perfect for Atlas 35 spline case), shifts smooth, no bellhousing $75

SM465 - 4x4 32 spline output for mid 80's NP208 or NP205, shifts smooth $125

SM465 to NP205 adapter Round pattern long input, shifter included $125

NP205 long 32 spline round pattern input, slip yoke output $200 as is or $250 with fix yoke conversion parts, fits round pattern TH400, SM465, or Doubler **SOLD**

NP205 large bearing bare case, round pattern input $75

Misc NP205 innards $ask

TH400 - Good running 2wd fixed yoke from 1977 Suburban $75 with converter and dust shield, still in truck until a buyer is found for 454. **PENDING**

kennyw · 07-20-2005, 05:46 PM

ttt

65_Chevy · 07-23-2005, 03:33 AM

how much for the 454 and the tranny combo?

DBLSPRT68 · 07-23-2005, 08:53 AM

Where are you located? Again, how much for the 454 th400 combo? David

Americanrider · 07-24-2005, 11:26 AM

Hanford Res is in central Washington state. Kenny is a straight-shooter kinda guy, have delt with him before.

Bump for ya K.

kennyw · 07-26-2005, 04:29 PM

Located in SE WA state, but the 454 is sold, should have the TH400 sold as well as soon as I get it out.

07-12-2005, 12:56 PM	#1
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 130	Chevy 454, Hydro clutch, SM465, 32 spline NP205's & TH400 454 big block, stock, strong runner, all accessories, drive it before I pull it $750 SOLD Hydro clutch bellhousing, lines, master, pedals $250 SOLD SM465 - 2wd 35 spline output (perfect for Atlas 35 spline case), shifts smooth, no bellhousing $75 SM465 - 4x4 32 spline output for mid 80's NP208 or NP205, shifts smooth $125 SM465 to NP205 adapter Round pattern long input, shifter included $125 NP205 long 32 spline round pattern input, slip yoke output $200 as is or $250 with fix yoke conversion parts, fits round pattern TH400, SM465, or Doubler SOLD NP205 large bearing bare case, round pattern input $75 Misc NP205 innards $ask TH400 - Good running 2wd fixed yoke from 1977 Suburban $75 with converter and dust shield, still in truck until a buyer is found for 454. PENDING __________________ "I got it one piece at a time and it didn't cost me a dime..." Last edited by kennyw; 07-26-2005 at 04:30 PM.

07-20-2005, 05:46 PM	#2
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 130	ttt __________________ "I got it one piece at a time and it didn't cost me a dime..."

07-23-2005, 08:53 AM	#4
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Where are you located? Again, how much for the 454 th400 combo? David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

07-26-2005, 04:29 PM	#6
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 130	Located in SE WA state, but the 454 is sold, should have the TH400 sold as well as soon as I get it out. __________________ "I got it one piece at a time and it didn't cost me a dime..."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-23-2005, 03:33 AM	#3
65_Chevy Registered User Join Date: Jul 2005 Location: Casper, Wyoming Posts: 49	how much for the 454 and the tranny combo?

07-24-2005, 11:26 AM	#5
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Hanford Res is in central Washington state. Kenny is a straight-shooter kinda guy, have delt with him before. Bump for ya K.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.