Need help finiding a water neck.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 07-21-2005, 12:35 AM

I have been looking for a chevy water neck with the temp guage mounted in it does anyone know where to get one .. I would like it to have the engine turned face if possible..

**Desert Rat** · 07-21-2005, 01:03 AM

I believe i have one of the water necks still with the threaded hole in it, but i'm not sure what you mean by the engine turned face.

GMC AMI · 07-21-2005, 07:52 AM

I have one and to show there is no hard feelings just pay shipping and it's yours!

FRENCHBLUE72 · 07-21-2005, 10:13 PM

Mike do you happen to have a pic?? I have a regular stock one with the hole in but I would like the complte set-up neck and guage if you have it great I will take it .. As for the hard feelings glad there are none I was just being an ass hat for some reason coulda been beer wheo know's...

GMC AMI · 07-23-2005, 05:36 AM

I didn't forget about you, hay season is a busy time for a farmer. I will try to dig her out and snap a PIC. Don't you just need the water temp. sending unit if you have the right neck? I watched a good show on how even beer throws a switch in our brains
and we become our own evil twin. Happens to me also and anyone who thinks it does not is just fooling themselves. Real life DR Jekell and MR Hyde potion.

Cat Fuzz · 07-23-2005, 11:49 AM

I know a 77 Monte Carlo w/ 350 has a threaded hole in the water neck. I might have one laying around.

FRENCHBLUE72 · 07-23-2005, 09:59 PM

O.K. guys I perfere the neck to be chrome or a very nice paintable piece with the guage already in it...

tomatocity · 07-24-2005, 12:05 AM

Quote:

Originally Posted by FRENCHBLUE72

O.K. guys I perfere the neck to be chrome or a very nice paintable piece with the guage already in it...

Make sure you get the one with an O ring so you don't have to use a gasket. A friend of mine has one but he is going to use it for his 57 Chevy. He is installing a Moon temp gauge directly in the 1/2" pipe hole.

FRENCHBLUE72 · 07-24-2005, 12:52 AM

Have you checked the price of moon temp guages???? Holy crap !!!!!!

SKELLY4x4 · 07-24-2005, 01:52 PM

[QUOTE=Mike Files]I didn't forget about you, hay season is a busy time for a farmer. I will try to dig her out and snap a PIC. Don't you just need the water temp. sending unit if you have the right neck? I watched a good show on how even beer throws a switch in our brains
and we become our own evil twin. Happens to me also and anyone who thinks it does not is just fooling themselves. Real life DR Jekell and MR Hyde potion.[/QUOTE

That's why I drink Coors. Budweiser makes me hornry!

Longhorn Man · 07-24-2005, 02:15 PM

moon anything is gonna cost alot.

Longhorn Man · 07-24-2005, 02:21 PM

actually, 37 bucks isn't too bad.
http://www.mooneyesusa.com/index.asp...ROD&ProdID=505

07-21-2005, 12:35 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Need help finiding a water neck.. I have been looking for a chevy water neck with the temp guage mounted in it does anyone know where to get one .. I would like it to have the engine turned face if possible.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-21-2005, 07:52 AM	#3
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	I have one and to show there is no hard feelings just pay shipping and it's yours! __________________ 1968 Chevy 4x4 307 4 speed

07-21-2005, 10:13 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Mike do you happen to have a pic?? I have a regular stock one with the hole in but I would like the complte set-up neck and guage if you have it great I will take it .. As for the hard feelings glad there are none I was just being an ass hat for some reason coulda been beer wheo know's... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-23-2005, 05:36 AM	#5
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	I didn't forget about you, hay season is a busy time for a farmer. I will try to dig her out and snap a PIC. Don't you just need the water temp. sending unit if you have the right neck? I watched a good show on how even beer throws a switch in our brains and we become our own evil twin. Happens to me also and anyone who thinks it does not is just fooling themselves. Real life DR Jekell and MR Hyde potion. __________________ 1968 Chevy 4x4 307 4 speed

07-23-2005, 11:49 AM	#6
Cat Fuzz My son, my joy. Join Date: Sep 2003 Location: Spokane WA Posts: 463	I know a 77 Monte Carlo w/ 350 has a threaded hole in the water neck. I might have one laying around. __________________ '69 Chevy 3/4 ton, 327cid, Carter AFB, Edelbrock intake, HEI, TH400. Founding member of the No Money To Spend On My Truck Club. When your at Home Depot, you WISH you had gotten an 8 foot bed!

07-21-2005, 01:03 AM	#2
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I believe i have one of the water necks still with the threaded hole in it, but i'm not sure what you mean by the engine turned face.

07-23-2005, 09:59 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	O.K. guys I perfere the neck to be chrome or a very nice paintable piece with the guage already in it... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-24-2005, 12:52 AM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Have you checked the price of moon temp guages???? Holy crap !!!!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-24-2005, 01:52 PM	#10
SKELLY4x4 Registered User Join Date: Jan 2001 Location: RAMONA, CA, USA Posts: 94	[QUOTE=Mike Files]I didn't forget about you, hay season is a busy time for a farmer. I will try to dig her out and snap a PIC. Don't you just need the water temp. sending unit if you have the right neck? I watched a good show on how even beer throws a switch in our brains and we become our own evil twin. Happens to me also and anyone who thinks it does not is just fooling themselves. Real life DR Jekell and MR Hyde potion.[/QUOTE That's why I drink Coors. Budweiser makes me hornry!

07-24-2005, 02:15 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	moon anything is gonna cost alot.

07-24-2005, 02:21 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	actually, 37 bucks isn't too bad. http://www.mooneyesusa.com/index.asp...ROD&ProdID=505 Last edited by Longhorn Man; 07-24-2005 at 02:35 PM. Reason: sh!t happens

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.