|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-21-2005, 07:21 PM
|
#1 |
|
Senior Member
 
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,766
|
73-87 disc spindles on 65-70 C10
This is probably the least expensive method. All done by hand. The 73-87 Outer end ES409RT was prepped before changing the 11/16" RH threads to 5/8" Left hand thread like the 65-70 Outer ES350L. Right hand threads need to be removed first. Takes about one hour per end --be patient. Compared to my 67 with 72 spindles, thread length should be sufficient but if needed more can be made. Pics below.
dennis |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
