|
07-25-2005, 08:49 PM
|
#1 |
|
Registered User
Join Date: Oct 2004
Location: Fayetteville, NC
Posts: 41
|
Wheel Help
I have a 70 C10 stepside with a 5 lug 4/6" drop. It has 3" drop spindles and has to have a 16" wheel in front to clear the caliper. What size rim and backspace can I get away with front and back? And also on backspace wouldnt the rear have less backspace than the front. It seems that would make it look deeper from the front of the rim in back and shallow in front. I am probably all mixed up. I would also entertain 17's. Any help is appreciated.
|
|
|
|
07-25-2005, 09:19 PM
|
#2 |
|
Blank
Join Date: May 2005
Location: Southington, CT
Posts: 221
|
8" wide 4" backspacing 10" wide in rear with 5" backspacing 15-18" no problem
__________________
 1969 lwb 4/6 drop 17x8-18x10 torque thrust II's 327-420hp 2004R 3.73 posi. 1977 Corvette 350-375hp 4speed, silver show car. 2002 S10 xtreme, work truck 2004.5 VW jetta GLI 1.8T 6speed, weekend warrior. 2013 Audi A3 TDI, the wife's car Last edited by speedracer; 07-25-2005 at 09:21 PM. |
|
|
|
|
07-26-2005, 08:31 AM
|
#3 |
|
Registered User
Join Date: Oct 2004
Location: Fayetteville, NC
Posts: 41
|
Thanks for the info
__________________
70 step with 68 clip, still in the body shop. GMPP 385 fast burn crate motor, 4:11 eaton. 5 lug 4/6" drop |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
