Steel Cowl Scoop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Orence1 · 08-01-2005, 08:04 PM

I posted a while back looking for a company that sells steel cowl scoops. I am not looking for a hood, just the scoop. Somebody sent me the right link and I thought I had saved the URL but apparently I did not. Can any of you guys help me out with this one? Thanks in advance.
Larry

neonlarry · 08-01-2005, 08:25 PM

I don't have your answer but this might help if the link was posted in your thread. Go to user CP on the right go to subscribed threads, this should show all the threads you have posted in if you are subscribed. It works even though there is no search function.

Orence1 · 08-01-2005, 08:43 PM

Neonlarry,
Perfect!!! Thanks for the help.
Larry

71cadc10 · 08-01-2005, 09:47 PM

I've used this place's product on my cadillac, I was pretty happy with it.

the speedcenter

UP GRADE · 08-02-2005, 09:00 AM

has anyone put one of these on a 67-72 truck. not a bad investment.

http://www.thespeedcenter.net/SpeedC...meFrameSet.htm

71cadc10 · 08-02-2005, 01:39 PM

I put one on this hood. It's is a decent product all in all. Comes way long so you can put it as far front as you want. The cowl had a few waves in it that needed filler/glaze to smooth out (it was stamped like that), but overall I was happy with the result. I think it would go on a truck hood just fine.

A plasma cutter, and 1/2" air flanger made the job much easier. I cut the opening all the way around, so the scoop sat on about a 3/4" lip. Then flanged the lip all the way around so the flange on the scoop would sit down in it flush with the top surface. tack welded all the way around about a 1000 times. grind/fill/glaze/high build surfacer/paint

*Randy70C-10* · 08-02-2005, 02:24 PM

Is that your Caddy? That's cool!!

LUV2XCLR8 · 08-02-2005, 03:59 PM

Quote:

Originally Posted by Randy70C-10

Is that your Caddy? That's cool!!

I agree, we need more pic's of that bad boy, looks like you drag her

08-01-2005, 08:04 PM	#1
Orence1 Registered User Join Date: Jan 2000 Location: Bothell, WA Posts: 548	Steel Cowl Scoop I posted a while back looking for a company that sells steel cowl scoops. I am not looking for a hood, just the scoop. Somebody sent me the right link and I thought I had saved the URL but apparently I did not. Can any of you guys help me out with this one? Thanks in advance. Larry

08-01-2005, 08:25 PM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	I don't have your answer but this might help if the link was posted in your thread. Go to user CP on the right go to subscribed threads, this should show all the threads you have posted in if you are subscribed. It works even though there is no search function. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

08-01-2005, 09:47 PM	#4
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	I've used this place's product on my cadillac, I was pretty happy with it. the speedcenter __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

08-02-2005, 09:00 AM	#5
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	has anyone put one of these on a 67-72 truck. not a bad investment. http://www.thespeedcenter.net/SpeedC...meFrameSet.htm Last edited by UP GRADE; 08-02-2005 at 09:02 AM.

08-02-2005, 01:39 PM	#6
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	I put one on this hood. It's is a decent product all in all. Comes way long so you can put it as far front as you want. The cowl had a few waves in it that needed filler/glaze to smooth out (it was stamped like that), but overall I was happy with the result. I think it would go on a truck hood just fine. A plasma cutter, and 1/2" air flanger made the job much easier. I cut the opening all the way around, so the scoop sat on about a 3/4" lip. Then flanged the lip all the way around so the flange on the scoop would sit down in it flush with the top surface. tack welded all the way around about a 1000 times. grind/fill/glaze/high build surfacer/paint __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear Last edited by 71cadc10; 08-02-2005 at 01:40 PM.

08-01-2005, 08:43 PM	#3
Orence1 Registered User Join Date: Jan 2000 Location: Bothell, WA Posts: 548	Neonlarry, Perfect!!! Thanks for the help. Larry

08-02-2005, 02:24 PM	#7
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Is that your Caddy? That's cool!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.