78 gmc jimmy f/s texas - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PickWick · 08-09-2005, 09:52 PM

ok i just bought this truck and started working on it and now im tryin to get my 4wheeler(atv) fixed.
1978 GMC Jimmy 2 Door 2wd 64K miles
it has a 350 with i guess a th350
2bbl carb
i will sell it with a parts truck(has to go with the blazer)
1200 obo for both i can post pictures of just about anything

f.monroe · 08-09-2005, 11:10 PM

Post pics of the blazer . I am interested .Frank

PickWick · 08-10-2005, 09:39 AM

EXTRAS:
fiberglass roll pan
i have 2 gm fender that were brand new, guy put them in the back of the parts truck and they have suface rust on them
i have started shaving the fenders both fenders have the emblem holes shaved, one i started shaving the turnsignals on
ive started shaving the hard top where it looks like the factory glued it 2gether
in the pics there are no bumpers nothing, i have everything in my shop and will go with the blazer
i have a title for the parts truck.

82c10 · 08-10-2005, 03:41 PM

how far is it from dallas

PickWick · 08-10-2005, 04:26 PM

around 2.5 hrs

79BIG10 · 08-11-2005, 12:34 AM

What is the parts truck? Also what city is Carthage near that some of us might know of?

PickWick · 08-11-2005, 09:33 AM

around 1.5 hrs from tyler
45 minutes from longview
45 minutes from shreveport la
25 minutes from marshall
25 minutes from center

the parts truck is a 1980 chevy c10 swb truck is complete besides a motor and tranny the passenger side door, rear cab pannel , front of bed have some damage from where looks like scraped up against a pole, im trading a guy the good drivers door for 2 good drivers and passenger doors.

PickWick · 08-12-2005, 01:46 PM

i will lower it down to $1,000 i need this thing gone, i have a 4wheer trip planned on sept 31st- oct 3rd help a guy out.

86 GMG · 08-12-2005, 02:37 PM

if i only had the money

PickWick · 08-21-2005, 02:08 PM

btt

PickWick · 08-24-2005, 02:17 PM

is 1,000 too much for this or what? let me see some offers and we can talk

79BIG10 · 08-25-2005, 01:15 AM

does it run and also does it have ac?

79BIG10 · 08-25-2005, 01:26 AM

Also any pics of the engine and interior?

PickWick · 08-25-2005, 11:17 AM

it does run and it does have a/c(we converted it over to r134a back in 1997 when another person owned it) but i took off the a/c compressor since there isn't any freon in it. i am the second owner of it. i don't have any pictures of the motor but i am fixing the little things on it like the rockers need tightened up(one side already done), valve cover gaskets, it needs a larger air filter on it my carberator man said. ill most likely change the spark plugs wires cap, rotor and coil b4 i sell it along with do a oil change and replace the fuel filter. i have it lowered in the rear with a mono leaf right now.
the interior on it as of right now is stripped out(well the back is atleast) i was going to replace the front seats since the passenger side seat is broke. i took out all the carpet to check for rust but none that i have seen except a little bit where the tailgate and rear floor meet.
i have installed a battery box in the back since im not going to have anything on the front fenders.

79BIG10 · 08-25-2005, 07:43 PM

Thanks for the info. Sounds like more of a project than I need right now with gas prices getting higher next week.

PickWick · 08-26-2005, 09:07 AM

no problem... thats why i picked up this blazer for a project. in the next few days im gonna put the front clip back on and go and get it inspected and registered

08-09-2005, 09:52 PM	#1
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	78 gmc jimmy f/s texas ok i just bought this truck and started working on it and now im tryin to get my 4wheeler(atv) fixed. 1978 GMC Jimmy 2 Door 2wd 64K miles it has a 350 with i guess a th350 2bbl carb i will sell it with a parts truck(has to go with the blazer) 1200 obo for both i can post pictures of just about anything

08-10-2005, 09:39 AM	#3
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	EXTRAS: fiberglass roll pan i have 2 gm fender that were brand new, guy put them in the back of the parts truck and they have suface rust on them i have started shaving the fenders both fenders have the emblem holes shaved, one i started shaving the turnsignals on ive started shaving the hard top where it looks like the factory glued it 2gether in the pics there are no bumpers nothing, i have everything in my shop and will go with the blazer i have a title for the parts truck. Last edited by PickWick; 08-10-2005 at 09:42 AM.

08-10-2005, 03:41 PM	#4
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	how far is it from dallas __________________ *SWB Stands for Short Wide Bed*

08-11-2005, 12:34 AM	#6
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	What is the parts truck? Also what city is Carthage near that some of us might know of? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

08-11-2005, 09:33 AM	#7
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	around 1.5 hrs from tyler 45 minutes from longview 45 minutes from shreveport la 25 minutes from marshall 25 minutes from center the parts truck is a 1980 chevy c10 swb truck is complete besides a motor and tranny the passenger side door, rear cab pannel , front of bed have some damage from where looks like scraped up against a pole, im trading a guy the good drivers door for 2 good drivers and passenger doors. Last edited by PickWick; 08-11-2005 at 09:37 AM.

08-09-2005, 11:10 PM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Post pics of the blazer . I am interested .Frank

08-10-2005, 04:26 PM	#5
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	around 2.5 hrs

08-12-2005, 01:46 PM	#8
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	i will lower it down to $1,000 i need this thing gone, i have a 4wheer trip planned on sept 31st- oct 3rd help a guy out.

08-12-2005, 02:37 PM	#9
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	if i only had the money __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

08-21-2005, 02:08 PM	#10
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	btt

08-24-2005, 02:17 PM	#11
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	is 1,000 too much for this or what? let me see some offers and we can talk

08-25-2005, 01:15 AM	#12
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	does it run and also does it have ac? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

08-25-2005, 01:26 AM	#13
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Also any pics of the engine and interior? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

08-25-2005, 11:17 AM	#14
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	it does run and it does have a/c(we converted it over to r134a back in 1997 when another person owned it) but i took off the a/c compressor since there isn't any freon in it. i am the second owner of it. i don't have any pictures of the motor but i am fixing the little things on it like the rockers need tightened up(one side already done), valve cover gaskets, it needs a larger air filter on it my carberator man said. ill most likely change the spark plugs wires cap, rotor and coil b4 i sell it along with do a oil change and replace the fuel filter. i have it lowered in the rear with a mono leaf right now. the interior on it as of right now is stripped out(well the back is atleast) i was going to replace the front seats since the passenger side seat is broke. i took out all the carpet to check for rust but none that i have seen except a little bit where the tailgate and rear floor meet. i have installed a battery box in the back since im not going to have anything on the front fenders.

08-25-2005, 07:43 PM	#15
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Thanks for the info. Sounds like more of a project than I need right now with gas prices getting higher next week. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson



Register or Log In To remove these advertisements.

08-26-2005, 09:07 AM	#16
PickWick Registered User Join Date: Jul 2005 Location: Carthage, Texas Posts: 44	no problem... thats why i picked up this blazer for a project. in the next few days im gonna put the front clip back on and go and get it inspected and registered

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.