Parting out 1975 GMC - I Think ;^) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Roberty · 08-15-2005, 08:17 PM

I'm parting out a SWB 1975 GMC/1978 Chevy truck. This truck started out as and is titled as a 1978 Chevy truck. Somewhere along the way it must have been wrecked and rebuilt with a 1975 GMC as a donor. It looks completely like a GMC inside and out. The body is pretty much shot completely (except the hood) with rust and bondo. I'd prefer a local pickup on most of this but I could ship if necessary. All prices are best offer and will be sold to someone at some price. Don't like my prices? Make me an offer then.

1. Complete interior $200 OBO. Dirty but in surprisingly good shape. Dash pad has three small cracks. Door panels in good shape. Seat needs recovered. Visors in good shape.

2. Dash cluster and instrument bezel $40

3. Front bumper $40. Straight and good crome but has two small holes to top were someone must have drilled it for fog lights at one time.

4. GMC Grill $40. Complete grill, headlight bezels and crome trim.

5. 12 bolt 5 lug rear end $50

I also have the complete wiring harness, mirrors glass, etc... available. Ask if there is something that you need not listed. Best way to contact me is by email at rkbky@catt.com and I'll get back to you ASAP. Truck is located just below Chattanooga, TN about two miles off I-75 if your passing through going or coming to/from Florida. I'm also up for trades as well. Here's the stuff I'm needing: http://67-72chevytrucks.com/vboard/s...61#post1368861

Roberty · 08-16-2005, 07:16 PM

Offers??

*mikesz* · 08-16-2005, 07:32 PM

I might be interested in the entire front end depending on condition. I would like to convert my 85 to the older style. How are the fenders, wheel wells, rad support, etc. How is the grill, i'm not concerned with the plastic part, just the chrome.

Mike

Roberty · 08-17-2005, 09:10 PM

Quote:

Originally Posted by mikesz

I might be interested in the entire front end depending on condition. I would like to convert my 85 to the older style. How are the fenders, wheel wells, rad support, etc. How is the grill, i'm not concerned with the plastic part, just the chrome.

Mike

Sorry for taking so long. A lightning bolt in last nights storm trashed my 'puter.

Came through my phone line, high speed modem, router and onboard network card taking the motherboard out with it.

I guess it could have been worse. You've never seen a MoFo get away from a computer so fast in your life as I did when it hit.

The fenders and inner fenders are shot. The core support appears to be OK along with the grill and front bumper. Let me know if your still interested.
Robert

*mikesz* · 08-17-2005, 10:59 PM

I'm thinking I may come up and take everything except the fenders and inner fenders. There are a few closer and complete I am waiting to hear about though. How much if I pull it and bring beer? Is that a tilt column?

Mike

Roberty · 08-18-2005, 01:30 PM

If you bring lots of beer it will get cheap in a hurry.

If that swap doesn't work out with that other member that your working on, how would you do on a swap for all the front end stuff that you want off my truck for your grill assembly? I should basically have everything that you need for the swap except the fenders and inner fenders. I wonder what the difference is between the inner fenders anyway?
Robert

74 shorty · 08-18-2005, 10:30 PM

How much for p/s setup(power steering box, pump, and motor bracket.

82c10 · 08-18-2005, 10:36 PM

what gears in the rearend, and how much to ship to 73018

corn · 08-19-2005, 12:29 AM

I sent you a PM...corn

Roberty · 08-19-2005, 08:22 AM

Quote:

Originally Posted by 74 shorty

How much for p/s setup(power steering box, pump, and motor bracket.

I think a local guy is wanting the power stearing and disc brake stuff for a 66 model he's restoring. I'll find out for sure this weekend.
Robert

Roberty · 08-19-2005, 08:24 AM

Quote:

Originally Posted by 82c10

what gears in the rearend, and how much to ship to 73018

I'll try to jack it up this afternoon and see if I can figure out what gear ratio it has. Your just wanting the ring and pinion - correct?

Roberty · 05-02-2006, 10:03 PM

Still have it if anyone's interested in anything. Prefer not to ship unless it's something small.

79BIG10 · 05-03-2006, 12:53 AM

How are the mirrors themselves? I need the lens part not the whole mount and all.

Lizzard27 · 05-03-2006, 09:10 AM

how about the tilt colum and would you ship that.

Roberty · 05-03-2006, 03:52 PM

Quote:

Originally Posted by Lizzard27

how about the tilt colum and would you ship that.

The tilt column is already sold locally. Thanks

**ScottH** · 05-03-2006, 04:43 PM

I would be interested in the door panels if available.

Thanks.

Roberty · 05-03-2006, 09:01 PM

Quote:

Originally Posted by 79BIG10

How are the mirrors themselves? I need the lens part not the whole mount and all.

How's $20 shipped sound? The glass is in good condition. If you want them I'll take them off and clean them up tomorrow just to make 100% sure on the condition first.

Roberty · 05-03-2006, 09:05 PM

Quote:

Originally Posted by ScottH

I would be interested in the door panels if available.

Thanks.

Still available. Give me a zip code and I'll give you a shipped price.
Thanks

**ScottH** · 05-03-2006, 10:24 PM

Shipping would be to 08753.

Thanks.

79BIG10 · 05-04-2006, 12:10 PM

Quote:

Originally Posted by Roberty

How's $20 shipped sound? The glass is in good condition. If you want them I'll take them off and clean them up tomorrow just to make 100% sure on the condition first.

Sounds good. PM me your address or a Paypal account and I'll send it off to you.

79BIG10 · 05-08-2006, 12:08 AM

ttt

Roberty · 05-08-2006, 12:14 AM

Quote:

Originally Posted by 79BIG10

Sounds good. PM me your address or a Paypal account and I'll send it off to you.

Sorry for the delay. I was out of town for the weekend. Sending PM now. My Paypal info is the same as my email address - rkbky@catt.com

Thanks,
Robert

Roberty · 05-08-2006, 12:20 AM

Quote:

Originally Posted by ScottH

I would be interested in the door panels if available.

Thanks.

Hi Scott. A local guy is interested in the whole interior but no $$ yet. If it falls through or he doesn't get back with me in the next few days I'll let you know.
Thanks,
Robert

Roberty · 05-10-2006, 12:00 AM

Quote:

Originally Posted by 79BIG10

Sounds good. PM me your address or a Paypal account and I'll send it off to you.

Payment received for the mirrors. I'll get 'em headed your way.
Thanks

**ScottH** · 05-17-2006, 11:54 AM

Robert, are the door panels sold, or still available?

Scott

08-15-2005, 08:17 PM	#1
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Parting out 1975 GMC I'm parting out a SWB 1975 GMC/1978 Chevy truck. This truck started out as and is titled as a 1978 Chevy truck. Somewhere along the way it must have been wrecked and rebuilt with a 1975 GMC as a donor. It looks completely like a GMC inside and out. The body is pretty much shot completely (except the hood) with rust and bondo. I'd prefer a local pickup on most of this but I could ship if necessary. All prices are best offer and will be sold to someone at some price. Don't like my prices? Make me an offer then. 1. Complete interior $200 OBO. Dirty but in surprisingly good shape. Dash pad has three small cracks. Door panels in good shape. Seat needs recovered. Visors in good shape. 2. Dash cluster and instrument bezel $40 3. Front bumper $40. Straight and good crome but has two small holes to top were someone must have drilled it for fog lights at one time. 4. GMC Grill $40. Complete grill, headlight bezels and crome trim. 5. 12 bolt 5 lug rear end $50 I also have the complete wiring harness, mirrors glass, etc... available. Ask if there is something that you need not listed. Best way to contact me is by email at rkbky@catt.com and I'll get back to you ASAP. Truck is located just below Chattanooga, TN about two miles off I-75 if your passing through going or coming to/from Florida. I'm also up for trades as well. Here's the stuff I'm needing: http://67-72chevytrucks.com/vboard/s...61#post1368861 Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored Last edited by Roberty; 05-02-2006 at 10:33 PM.

08-16-2005, 07:16 PM	#2
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Offers?? __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

08-18-2005, 01:30 PM	#6
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	If you bring lots of beer it will get cheap in a hurry. If that swap doesn't work out with that other member that your working on, how would you do on a swap for all the front end stuff that you want off my truck for your grill assembly? I should basically have everything that you need for the swap except the fenders and inner fenders. I wonder what the difference is between the inner fenders anyway? Robert __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

08-18-2005, 10:36 PM	#8
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	what gears in the rearend, and how much to ship to 73018 __________________ *SWB Stands for Short Wide Bed*

05-02-2006, 10:03 PM	#12
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Re: Parting out 1975 GMC Still have it if anyone's interested in anything. Prefer not to ship unless it's something small. __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

08-16-2005, 07:32 PM	#3
mikesz Account Suspended Join Date: Sep 2003 Location: Atlanta, GA Posts: 105	I might be interested in the entire front end depending on condition. I would like to convert my 85 to the older style. How are the fenders, wheel wells, rad support, etc. How is the grill, i'm not concerned with the plastic part, just the chrome. Mike

08-17-2005, 10:59 PM	#5
mikesz Account Suspended Join Date: Sep 2003 Location: Atlanta, GA Posts: 105	I'm thinking I may come up and take everything except the fenders and inner fenders. There are a few closer and complete I am waiting to hear about though. How much if I pull it and bring beer? Is that a tilt column? Mike

08-18-2005, 10:30 PM	#7
74 shorty Registered User Join Date: Aug 2005 Location: Bowling Green, Mo Posts: 98	How much for p/s setup(power steering box, pump, and motor bracket.

08-19-2005, 12:29 AM	#9
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	I sent you a PM...corn

05-03-2006, 12:53 AM	#13
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Re: Parting out 1975 GMC - I Think ;^) How are the mirrors themselves? I need the lens part not the whole mount and all. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

05-03-2006, 09:10 AM	#14
Lizzard27 Senior Member Join Date: Jun 2005 Location: Gladewater Tx. Posts: 382	Re: Parting out 1975 GMC - I Think ;^) how about the tilt colum and would you ship that.

05-03-2006, 04:43 PM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 1975 GMC - I Think ;^) I would be interested in the door panels if available. Thanks.

05-03-2006, 10:24 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 1975 GMC - I Think ;^) Shipping would be to 08753. Thanks.

05-08-2006, 12:08 AM	#21
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Re: Parting out 1975 GMC - I Think ;^) ttt

05-17-2006, 11:54 AM	#25
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 1975 GMC - I Think ;^) Robert, are the door panels sold, or still available? Scott



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.