Painting headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C&C Chevy · 08-18-2005, 08:10 PM

Thanks to a fellow board member, I have some headers.

Anyway, they need repainted. I got a buddy at work that has a sand blaster, so I can get them cleaned off pretty good. Do I need to prime them first(if so, what kind or brand?) or just paint them with some high temp. paint(again, wind kind or brand is the best?)?

82c10 · 08-18-2005, 08:20 PM

i would like to know what to use to paint them to, and i can sandblast them myself

magnethead · 08-18-2005, 08:39 PM

I'd say powdercoat or JetHot Coating are best of course.

C&C Chevy · 08-18-2005, 09:19 PM

Quote:

Originally Posted by magnethead

I'd say powdercoat or JetHot Coating are best of course.

I would to, but I'm not going to spend $195 on a set of $130 painted headers.

bigarmzz · 08-18-2005, 09:21 PM

get em powder coated or jet .....

i've tried on several different occassions, with several different brands....everything from cheap can spray to the more expensive eastwood stuff...never had what i call any real luck

i say save your self the time and get em jet coated...nice finish

C&C Chevy · 08-18-2005, 09:30 PM

If they were some nice shorties, I would consider getting them coated. They are just some basic painted Hedman Headers with some slight rust. I just want them to look decent. What about the "home" powder coating kits? I want to get them done for no more then $30 in materials.

Porboy · 08-19-2005, 02:07 PM

A good alternative to using paint is to use copper coat spray gasket. It doesnt burn off and once it has been hot enough it turns to a greyish color.

**N2TRUX** · 08-19-2005, 06:13 PM

This may not be what you are looking for, but I can testify that it works great. It's Eastwood brand Stainless Steel High Temp Coating. It gives your exhaust a fresh cast iron finish, and it is very durable. The nice part about it is it can be applied with a brush and still looks good once it has heat cycled a few times....

piecesparts · 08-19-2005, 09:31 PM

Most powder coaters don't have the coatings that will stand up to the high heat of headers, but there are some that do. My bet is that the charge to coat headers is not that bad. Ofcourse the purchase of a new set of creamic coated headers is not that bad either. I have a set on my stroker engine that has held up for a good noumber of years. I just had them off last winter to redo the engine and they are still in great shape.

SmittySmith · 08-19-2005, 11:22 PM

Hey C&C Congratulations on getting the Hedmans, you beat me to them by about an hour! Let us know how they turn out. Looked like a bargan.
Regards.

C&C Chevy · 08-19-2005, 11:56 PM

N2, that looks like something I would want. Thanks.

SS, yeah, it was to good to pass up.

72MARIO · 08-20-2005, 04:28 PM

Oky I will Answer you question.

VHT sells a flame proof paint. Its great. by far the best spray can headder paint. Lasts fairly well. I have 3000 mile's most of that was in the rain. I sandblasted and painted using the flat black paint. They still look great. Cant beat it think it was $13 cdn for the can. You will need 2 cans.

Good luck.

matthufham · 08-20-2005, 06:11 PM

http://store.summitracing.com/partde...2&autoview=sku

from summit, it's 2000 degree paint, safe for a pair of headers. summit sells good stuff so i'd buy it, but that's later down the road for me.

08-18-2005, 08:10 PM	#1
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Painting headers Thanks to a fellow board member, I have some headers. Anyway, they need repainted. I got a buddy at work that has a sand blaster, so I can get them cleaned off pretty good. Do I need to prime them first(if so, what kind or brand?) or just paint them with some high temp. paint(again, wind kind or brand is the best?)? __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

08-18-2005, 08:20 PM	#2
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	i would like to know what to use to paint them to, and i can sandblast them myself __________________ *SWB Stands for Short Wide Bed*

08-18-2005, 09:21 PM	#5
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	get em powder coated or jet ..... i've tried on several different occassions, with several different brands....everything from cheap can spray to the more expensive eastwood stuff...never had what i call any real luck i say save your self the time and get em jet coated...nice finish __________________ 1987 350 TBI lowered 5/7

08-18-2005, 09:30 PM	#6
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	If they were some nice shorties, I would consider getting them coated. They are just some basic painted Hedman Headers with some slight rust. I just want them to look decent. What about the "home" powder coating kits? I want to get them done for no more then $30 in materials. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

08-19-2005, 02:07 PM	#7
Porboy Registered User Join Date: Sep 2004 Location: Orient Iowa Posts: 4	A good alternative to using paint is to use copper coat spray gasket. It doesnt burn off and once it has been hot enough it turns to a greyish color. __________________ 1959 GMC Shortbox stepside 1971 Chevy C10 1967 Mecury Cougar 1964 Ford Galaxie 2dr 1964 Ford Galaxie 4dr 1976 Toyato Celica GT 1984 Chevy S10 Blazer And I need to get down to 3

08-18-2005, 08:39 PM	#3
magnethead 7000 #'s of american IRON Join Date: Dec 2004 Location: north tx Posts: 883	I'd say powdercoat or JetHot Coating are best of course.

08-19-2005, 06:13 PM	#8
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	This may not be what you are looking for, but I can testify that it works great. It's Eastwood brand Stainless Steel High Temp Coating. It gives your exhaust a fresh cast iron finish, and it is very durable. The nice part about it is it can be applied with a brush and still looks good once it has heat cycled a few times.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-19-2005, 09:31 PM	#9
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Most powder coaters don't have the coatings that will stand up to the high heat of headers, but there are some that do. My bet is that the charge to coat headers is not that bad. Ofcourse the purchase of a new set of creamic coated headers is not that bad either. I have a set on my stroker engine that has held up for a good noumber of years. I just had them off last winter to redo the engine and they are still in great shape.

08-19-2005, 11:22 PM	#10
SmittySmith '82 GMC Sierra Classic Join Date: Aug 2005 Location: Oklahoma City Posts: 82	Hey C&C Congratulations on getting the Hedmans, you beat me to them by about an hour! Let us know how they turn out. Looked like a bargan. Regards.

08-19-2005, 11:56 PM	#11
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	N2, that looks like something I would want. Thanks. SS, yeah, it was to good to pass up. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

08-20-2005, 04:28 PM	#12
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Oky I will Answer you question. VHT sells a flame proof paint. Its great. by far the best spray can headder paint. Lasts fairly well. I have 3000 mile's most of that was in the rain. I sandblasted and painted using the flat black paint. They still look great. Cant beat it think it was $13 cdn for the can. You will need 2 cans. Good luck. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

08-20-2005, 06:11 PM	#13
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	http://store.summitracing.com/partde...2&autoview=sku from summit, it's 2000 degree paint, safe for a pair of headers. summit sells good stuff so i'd buy it, but that's later down the road for me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.