Trying to remove dash pad. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*wolfthing2000* · 08-18-2005, 10:51 PM

I give. How does this thing come off anyway. I got a philips screwdriver out and poked it into the holes in the face of the pad and there are no fasteners in there. (removed/and or lost by prior owner?) I can lift the face straight up slightly, but it seems that there are maybe some other fasteners holding it down???
I didn't crawl under the dash to look and I went after the more obvious glovebox door and such.
I would imagine it must be something fairly simple, I thought I would ask before braking something

.

4tiresngas · 08-18-2005, 10:58 PM

Wolfthing,

There are seven (7) bolts molded into the pad that stick through the metal dash. They have 5/16 or 3/8 nuts on them. You have to get under the dash...they are behind the gauge bezel, above the radio opening, and behind the glove box lining. Hope that helps.

**Green Machine** · 08-18-2005, 11:18 PM

You have to remove the glove box and you might as well pull the gauge cluster and and drop the heater contols and radio, I don't think you can get at the little stud bolts otherwise.

farside847 · 08-18-2005, 11:21 PM

You can reach them, but its a *****. There were only 5 on mine.

nitor · 08-18-2005, 11:32 PM

That's how I did mine. That's how I also put it back together.

*wolfthing2000* · 08-19-2005, 12:06 AM

No wonder!!!! Thanks, all of you.

Bob Moore · 08-19-2005, 12:12 AM

There is also one in each corner that has a funny angle on it. Always the hardest for me to get undone and especially to get started when putting back on.

Good luck - Bob

Joe67 · 08-19-2005, 07:31 AM

They are in there good for sure.
I'm strongly considering leaving mine off and filling the holes

08-18-2005, 10:51 PM	#1
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Trying to remove dash pad. I give. How does this thing come off anyway. I got a philips screwdriver out and poked it into the holes in the face of the pad and there are no fasteners in there. (removed/and or lost by prior owner?) I can lift the face straight up slightly, but it seems that there are maybe some other fasteners holding it down??? I didn't crawl under the dash to look and I went after the more obvious glovebox door and such. I would imagine it must be something fairly simple, I thought I would ask before braking something .

08-18-2005, 10:58 PM	#2
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Wolfthing, There are seven (7) bolts molded into the pad that stick through the metal dash. They have 5/16 or 3/8 nuts on them. You have to get under the dash...they are behind the gauge bezel, above the radio opening, and behind the glove box lining. Hope that helps. __________________ Dan dan.brue@us.army.mil

08-18-2005, 11:18 PM	#3
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	You have to remove the glove box and you might as well pull the gauge cluster and and drop the heater contols and radio, I don't think you can get at the little stud bolts otherwise. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

08-18-2005, 11:21 PM	#4
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	You can reach them, but its a *****. There were only 5 on mine. __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

08-18-2005, 11:32 PM	#5
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	That's how I did mine. That's how I also put it back together. __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer

08-19-2005, 12:06 AM	#6
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	No wonder!!!! Thanks, all of you.

08-19-2005, 12:12 AM	#7
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	There is also one in each corner that has a funny angle on it. Always the hardest for me to get undone and especially to get started when putting back on. Good luck - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

08-19-2005, 07:31 AM	#8
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	They are in there good for sure. I'm strongly considering leaving mine off and filling the holes __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.