56-V8 Motor Mounts, Please HELP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

horseballz · 08-19-2005, 03:02 PM

Hi Guys,
Does anyone know where I can get a set of front motor mount studs and nuts for a 56-V8? I have the upper and lower mount brackets and the washer/rubber cushion sets are available seperately but I can't seem to find just the studs/bolts unless I buy a complete kit with the brackets for $100+. Can anyone help me?
Thanks,
Gene & Jr

Bagd74Jimmy · 08-19-2005, 11:24 PM

Have you checked with Chevy Duty, I know they sell the complete sets. The sell the components too, so they might have those.

rico_bob · 09-07-2005, 12:10 AM

CD does not sell the long shoulder bolts as a separate item. The 55-57 Cars use the same mounts. I see that danchuk has the bolts with the rubber cushions but not separtely. But you could always call them and ask them if they would sell the bolts nuts and washers separtely? From the link the kit is part #198 and they come as a set for one side, so you have to buy tow sets. The sets list for $25.95. Here is the link.... my 2-cents worth. rico_bob

http://www.danchuk.com/PDF/Fasteners_Mounts.pdf

08-19-2005, 11:24 PM	#2
Bagd74Jimmy Registered User Join Date: Apr 2005 Location: San Antonio, Texas Posts: 28	Have you checked with Chevy Duty, I know they sell the complete sets. The sell the components too, so they might have those. __________________ 1974 GMC Jimmy ( on 'bags by the end of summer ) 1959 Chevy LWB Stepside

09-07-2005, 12:10 AM	#3
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	CD does not sell the long shoulder bolts as a separate item. The 55-57 Cars use the same mounts. I see that danchuk has the bolts with the rubber cushions but not separtely. But you could always call them and ask them if they would sell the bolts nuts and washers separtely? From the link the kit is part #198 and they come as a set for one side, so you have to buy tow sets. The sets list for $25.95. Here is the link.... my 2-cents worth. rico_bob http://www.danchuk.com/PDF/Fasteners_Mounts.pdf __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-19-2005, 03:02 PM	#1
horseballz Registered User Join Date: Aug 2005 Location: Las Vegas,NV Posts: 19	56-V8 Motor Mounts, Please HELP Hi Guys, Does anyone know where I can get a set of front motor mount studs and nuts for a 56-V8? I have the upper and lower mount brackets and the washer/rubber cushion sets are available seperately but I can't seem to find just the studs/bolts unless I buy a complete kit with the brackets for $100+. Can anyone help me? Thanks, Gene & Jr



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.